{"product_id":"adapt-system-professional-360-red-light-therapy-with-customizable-wavelengths-adjustable-frequencies","title":"BioLight Adapt System: Professional 360° Red Light Therapy with Customizable Wavelengths \u0026 Adjustable Frequencies","description":"\u003cdiv class=\"product-pdp product-pdp--calm\"\u003e\n\n \u003csection class=\"section\"\u003e\n \u003cdiv class=\"container\"\u003e\n \u003cdiv class=\"overview__grid\"\u003e\n \u003cdiv class=\"overview__body\"\u003e\n \u003cp class=\"section__eyebrow\"\u003eBioLight | Adapt System\u003c\/p\u003e\n \u003ch1 class=\"section__title\"\u003eBioLight Adapt System\u003c\/h1\u003e\n \u003cp\u003eEvery other device BioLight builds ships with its wavelengths fixed at the factory. On the Adapt System you name them. BioLight publishes two wavelength windows here, 620-750nm for red and 800-1,000nm for near-infrared, and asks you to state your preferred figure from each range in a note on the order or by email before the unit is built. One wavelength from each spectrum, or several. That choice is what this system sells.\u003c\/p\u003e\n \u003cp\u003eIt is two pieces of hardware. The Adapt Table measures 75 in. x 27 in. x 7.7 in., carries 1000 LEDs, takes up to 600 lbs of load, and BioLight quotes it at 80 mW\/cm2 at 0 in. at 100% intensity. The Adapt Panel measures 75 in. x 25 in. x 4 in., carries its own 1000 LEDs, rotates a full 360 degrees, sits on a powered mobile stand that changes its height, and BioLight quotes it at 80 mW\/cm2 at 6 in. at 100%. The two figures read identically and are not the same statement, because BioLight measured one at the surface and the other six inches back. Both units run light pulsing from 1 to 9,999 Hz, three light settings, intensity from 1 to 100% and a programmable timer. BioLight sells them as a pair or as Table Only and Panel Only.\u003c\/p\u003e\n \u003cdiv class=\"spec-banner\"\u003e\n \u003cdiv class=\"spec-card\"\u003e\n \u003cdiv class=\"spec-card__label\"\u003eWavelength Ranges\u003c\/div\u003e\n \u003cdiv class=\"spec-card__value\"\u003e620-750nm\u003c\/div\u003e\n \u003cdiv class=\"spec-card__sub\"\u003eRed; near-infrared 800-1,000nm\u003c\/div\u003e\n \u003c\/div\u003e\n \u003cdiv class=\"spec-card\"\u003e\n \u003cdiv class=\"spec-card__label\"\u003eLED Count\u003c\/div\u003e\n \u003cdiv class=\"spec-card__value\"\u003e1000 + 1000\u003c\/div\u003e\n \u003cdiv class=\"spec-card__sub\"\u003eTable and panel, 1000 each\u003c\/div\u003e\n \u003c\/div\u003e\n \u003cdiv class=\"spec-card\"\u003e\n \u003cdiv class=\"spec-card__label\"\u003ePanel Irradiance\u003c\/div\u003e\n \u003cdiv class=\"spec-card__value\"\u003e80 mW\/cm2\u003c\/div\u003e\n \u003cdiv class=\"spec-card__sub\"\u003eAt 6 in., 100% intensity\u003c\/div\u003e\n \u003c\/div\u003e\n \u003cdiv class=\"spec-card\"\u003e\n \u003cdiv class=\"spec-card__label\"\u003eLight Pulsing\u003c\/div\u003e\n \u003cdiv class=\"spec-card__value\"\u003e1-9,999 Hz\u003c\/div\u003e\n \u003cdiv class=\"spec-card__sub\"\u003eBoth units, programmable timer\u003c\/div\u003e\n \u003c\/div\u003e\n \u003c\/div\u003e\n \u003cdiv class=\"value-bar\"\u003e\n \u003cspan class=\"value-bar__item\"\u003eWavelengths named at order\u003c\/span\u003e\n \u003cspan class=\"value-bar__item\"\u003eTable 80 mW\/cm2 at 0 in.\u003c\/span\u003e\n \u003cspan class=\"value-bar__item\"\u003ePanel 80 mW\/cm2 at 6 in.\u003c\/span\u003e\n \u003cspan class=\"value-bar__item\"\u003eBioLight states a 5 year warranty\u003c\/span\u003e\n \u003c\/div\u003e\n \u003c\/div\u003e\n \u003cdiv class=\"overview__image\"\u003e\n \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0044\/9341\/0393\/files\/Professionalcapsulewholefullbodypdtinfraredredledlighttherapylamp660nm850nmcontouringmachinepanelbed_3.png?v=1788214155\" alt=\"BioLight Adapt System table and overhead panel\" width=\"1200\" height=\"1200\" loading=\"eager\"\u003e\n \u003c\/div\u003e\n \u003c\/div\u003e\n \u003c\/div\u003e\n \u003c\/section\u003e\n\n \u003csection class=\"section--dark\"\u003e\n \u003cdiv class=\"container\"\u003e\n \u003cp class=\"section__eyebrow\"\u003eThe optical build\u003c\/p\u003e\n \u003ch2 class=\"section__title\"\u003eTwo Spectra, Two Units, One Order Form\u003c\/h2\u003e\n \u003cp class=\"section__lead\"\u003eRed and near-infrared are two bands of the same spectrum, separated by where they sit in nanometres. On this system BioLight hands both bands to the buyer as a range to pick from, then builds the table and the panel around the figures you give.\u003c\/p\u003e\n \u003cdiv class=\"tech__grid\"\u003e\n \u003cdiv class=\"tech-card tech-card--accent\"\u003e\n \u003cdiv class=\"tech-card__icon\"\u003e🌈\u003c\/div\u003e\n \u003cdiv class=\"tech-card__title\"\u003eRed 620-750nm, Near-Infrared 800-1,000nm\u003c\/div\u003e\n \u003cdiv class=\"tech-card__text\"\u003eWavelength is measured in nanometres, and the number decides what the light is. Anything from roughly 620 to 750nm is visible red, the deep end of what an eye registers. Anything from 800 to 1,000nm is near-infrared, past the visible band, so an emitter running only near-infrared looks close to dark while it is on. BioLight publishes both of those windows for the Adapt System and lets you choose one or several wavelengths from each. No fixed nm figure is printed for this product, because the number is yours to set.\u003c\/div\u003e\n \u003cspan class=\"tech-card__stat\"\u003eCustomer-specified nm\u003c\/span\u003e\n \u003c\/div\u003e\n \u003cdiv class=\"tech-card\"\u003e\n \u003cdiv class=\"tech-card__icon\"\u003e🛋\u003c\/div\u003e\n \u003cdiv class=\"tech-card__title\"\u003eThe Adapt Table\u003c\/div\u003e\n \u003cdiv class=\"tech-card__text\"\u003eA 75 in. x 27 in. x 7.7 in. table carrying 1000 LEDs, weighing 202 lbs and rated to hold 600 lbs. Intensity runs 1 to 100% from a knob on the side of the table, and the same control set chooses the light setting and the session duration. BioLight quotes its irradiance as 80 mW\/cm2 at 0 in. at 100% intensity, measured at the surface.\u003c\/div\u003e\n \u003cspan class=\"tech-card__stat\"\u003e1000 LEDs, 600 lb capacity\u003c\/span\u003e\n \u003c\/div\u003e\n \u003cdiv class=\"tech-card\"\u003e\n \u003cdiv class=\"tech-card__icon\"\u003e🔆\u003c\/div\u003e\n \u003cdiv class=\"tech-card__title\"\u003eThe Adapt Panel\u003c\/div\u003e\n \u003cdiv class=\"tech-card__text\"\u003eA 75 in. x 25 in. x 4 in. panel with its own 1000 LEDs at 206 lbs, mounted on a powered mobile stand whose height adjusts, and free to rotate 360 degrees to whatever angle you set. BioLight publishes a full intensity ladder for it, all measured at 6 in.: 80 mW\/cm2 at 100%, 66 at 75%, 49 at 50%, 24 at 25% and 15 at 1%.\u003c\/div\u003e\n \u003cspan class=\"tech-card__stat\"\u003e80 mW\/cm2 at 6 in.\u003c\/span\u003e\n \u003c\/div\u003e\n \u003cdiv class=\"tech-card\"\u003e\n \u003cdiv class=\"tech-card__icon\"\u003e⚡\u003c\/div\u003e\n \u003cdiv class=\"tech-card__title\"\u003ePower, Flicker and EMF\u003c\/div\u003e\n \u003cdiv class=\"tech-card__text\"\u003eEach unit draws 1450W and takes 100-240VAC at 50\/60Hz, so the same hardware runs on North American and international supply. BioLight publishes light flicker at 1.2% modulation at 60Hz and EMF emission at 0.1 microtesla at 0 in. on both the table and the panel, and states that at 6 in. and beyond the EMF reading is close to zero. LED lifespan is given as 100,000 hours.\u003c\/div\u003e\n \u003cspan class=\"tech-card__stat\"\u003e1450W per unit\u003c\/span\u003e\n \u003c\/div\u003e\n \u003c\/div\u003e\n \u003c\/div\u003e\n \u003c\/section\u003e\n\n \u003csection class=\"section--cream\"\u003e\n \u003cdiv class=\"container\"\u003e\n \u003cp class=\"section__eyebrow\"\u003eThe numbers\u003c\/p\u003e\n \u003ch2 class=\"section__title\"\u003eEight Figures BioLight Publishes for the Adapt System\u003c\/h2\u003e\n \u003cp class=\"section__lead\"\u003eEach figure below is BioLight's own, in BioLight's units, with the measurement distance BioLight attached to it.\u003c\/p\u003e\n \u003cdiv class=\"benefits__grid\"\u003e\n \u003cdiv class=\"benefit-card\"\u003e\n \u003cdiv class=\"benefit-card__icon\"\u003e💡\u003c\/div\u003e\n \u003cdiv class=\"benefit-card__title\"\u003e1000 LEDs in the table\u003c\/div\u003e\n \u003cdiv class=\"benefit-card__tag\"\u003eAdapt Table\u003c\/div\u003e\n \u003c\/div\u003e\n \u003cdiv class=\"benefit-card\"\u003e\n \u003cdiv class=\"benefit-card__icon benefit-card__icon--dark\"\u003e🔆\u003c\/div\u003e\n \u003cdiv class=\"benefit-card__title\"\u003e1000 LEDs in the panel\u003c\/div\u003e\n \u003cdiv class=\"benefit-card__tag\"\u003eAdapt Panel\u003c\/div\u003e\n \u003c\/div\u003e\n \u003cdiv class=\"benefit-card\"\u003e\n \u003cdiv class=\"benefit-card__icon\"\u003e📈\u003c\/div\u003e\n \u003cdiv class=\"benefit-card__title\"\u003eTable 80 mW\/cm2 at 0 in.\u003c\/div\u003e\n \u003cdiv class=\"benefit-card__tag\"\u003e100% intensity, at the surface\u003c\/div\u003e\n \u003c\/div\u003e\n \u003cdiv class=\"benefit-card\"\u003e\n \u003cdiv class=\"benefit-card__icon benefit-card__icon--dark\"\u003e📏\u003c\/div\u003e\n \u003cdiv class=\"benefit-card__title\"\u003ePanel 80 mW\/cm2 at 6 in.\u003c\/div\u003e\n \u003cdiv class=\"benefit-card__tag\"\u003e100% intensity, six inches back\u003c\/div\u003e\n \u003c\/div\u003e\n \u003cdiv class=\"benefit-card\"\u003e\n \u003cdiv class=\"benefit-card__icon\"\u003e〰\u003c\/div\u003e\n \u003cdiv class=\"benefit-card__title\"\u003ePulsing from 1 to 9,999 Hz\u003c\/div\u003e\n \u003cdiv class=\"benefit-card__tag\"\u003eBoth units\u003c\/div\u003e\n \u003c\/div\u003e\n \u003cdiv class=\"benefit-card\"\u003e\n \u003cdiv class=\"benefit-card__icon benefit-card__icon--dark\"\u003e🎚\u003c\/div\u003e\n \u003cdiv class=\"benefit-card__title\"\u003eIntensity 1 to 100%\u003c\/div\u003e\n \u003cdiv class=\"benefit-card__tag\"\u003eSide knob on the table\u003c\/div\u003e\n \u003c\/div\u003e\n \u003cdiv class=\"benefit-card\"\u003e\n \u003cdiv class=\"benefit-card__icon\"\u003e🔌\u003c\/div\u003e\n \u003cdiv class=\"benefit-card__title\"\u003e100-240VAC at 50\/60Hz\u003c\/div\u003e\n \u003cdiv class=\"benefit-card__tag\"\u003e1450W per unit\u003c\/div\u003e\n \u003c\/div\u003e\n \u003cdiv class=\"benefit-card\"\u003e\n \u003cdiv class=\"benefit-card__icon\"\u003e🛡\u003c\/div\u003e\n \u003cdiv class=\"benefit-card__title\"\u003e100,000 hour LED lifespan\u003c\/div\u003e\n \u003cdiv class=\"benefit-card__tag\"\u003e5 year warranty, 60 day return\u003c\/div\u003e\n \u003c\/div\u003e\n \u003c\/div\u003e\n \u003c\/div\u003e\n \u003c\/section\u003e\n\n \u003csection class=\"section\"\u003e\n \u003cdiv class=\"container\"\u003e\n \u003cp class=\"section__eyebrow\"\u003eCloser look\u003c\/p\u003e\n \u003ch2 class=\"section__title\"\u003eThe Table, the Panel and the Order You Place\u003c\/h2\u003e\n \u003cdiv class=\"product-dives\"\u003e\n\n \u003cdiv class=\"product-dive\"\u003e\n \u003cdiv class=\"product-dive__image\"\u003e\n \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0044\/9341\/0393\/files\/IMG_2821copy.jpg?v=1788214156\" alt=\"BioLight Adapt Table with 1000 LEDs\" width=\"1500\" height=\"1500\" loading=\"lazy\"\u003e\n \u003c\/div\u003e\n \u003cdiv class=\"product-dive__body-wrap\"\u003e\n \u003cspan class=\"product-dive__badge\"\u003eAdapt Table\u003c\/span\u003e\n \u003ch3 class=\"product-dive__title\"\u003eA 75 Inch Table With 1000 Emitters Underneath\u003c\/h3\u003e\n \u003cp class=\"product-dive__body\"\u003eThe table is 75 in. long, 27 in. across and 7.7 in. deep, weighs 202 lbs and takes 600 lbs of load. Its 1000 LEDs run at whatever red and near-infrared wavelengths you specified at order. Intensity is set by hand from a knob on the side, anywhere from 1 to 100%, and the same controls choose between the three light settings and set the session length on the programmable timer. BioLight's stated irradiance for the table is 80 mW\/cm2 at 0 in. at full intensity, a contact-distance figure.\u003c\/p\u003e\n \u003cul class=\"product-dive__list\"\u003e\n \u003cli\u003e75 in. x 27 in. x 7.7 in., 202 lbs\u003c\/li\u003e\n \u003cli\u003e1000 LEDs, 600 lb maximum load on the table\u003c\/li\u003e\n \u003cli\u003e80 mW\/cm2 at 0 in. at 100% intensity\u003c\/li\u003e\n \u003cli\u003eSide knob sets intensity from 1 to 100%\u003c\/li\u003e\n \u003cli\u003eLight pulsing 1 to 9,999 Hz, programmable timer\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cdiv class=\"feature-badges\"\u003e\n \u003cspan class=\"feature-badge\"\u003e1000 LEDs\u003c\/span\u003e\n \u003cspan class=\"feature-badge\"\u003e600 lb capacity\u003c\/span\u003e\n \u003cspan class=\"feature-badge\"\u003e80 mW\/cm2 at 0 in.\u003c\/span\u003e\n \u003c\/div\u003e\n \u003c\/div\u003e\n \u003c\/div\u003e\n\n \u003cdiv class=\"product-dive product-dive--reverse\"\u003e\n \u003cdiv class=\"product-dive__image\"\u003e\n \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0044\/9341\/0393\/files\/AdaptPanel.jpg?v=1788214156\" alt=\"BioLight Adapt Panel on its powered mobile stand\" width=\"1500\" height=\"1500\" loading=\"lazy\"\u003e\n \u003c\/div\u003e\n \u003cdiv class=\"product-dive__body-wrap\"\u003e\n \u003cspan class=\"product-dive__badge\"\u003eAdapt Panel\u003c\/span\u003e\n \u003ch3 class=\"product-dive__title\"\u003eThe Half That Moves, and the Only Ladder BioLight Prints at 6 Inches\u003c\/h3\u003e\n \u003cp class=\"product-dive__body\"\u003eThe panel is 75 in. x 25 in. x 4 in. and 206 lbs, on a powered mobile stand that raises and lowers it, and it turns a full 360 degrees so the face can be angled where you want it. It is the only half of this system BioLight quotes at a working distance: 80 mW\/cm2 at 6 in. at 100% intensity, 66 mW\/cm2 at 75%, 49 at 50%, 24 at 25% and 15 at 1%. Same 1000 LEDs, same 1 to 9,999 Hz pulsing, same three light settings, same 1450W draw as the table.\u003c\/p\u003e\n \u003cul class=\"product-dive__list\"\u003e\n \u003cli\u003e75 in. x 25 in. x 4 in., 206 lbs\u003c\/li\u003e\n \u003cli\u003e1000 LEDs, powered mobile stand with height adjustment\u003c\/li\u003e\n \u003cli\u003eRotates 360 degrees to set the angle\u003c\/li\u003e\n \u003cli\u003e80 \/ 66 \/ 49 \/ 24 \/ 15 mW\/cm2 at 6 in. across 100 \/ 75 \/ 50 \/ 25 \/ 1%\u003c\/li\u003e\n \u003cli\u003eLight flicker 1.2% modulation at 60Hz\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cdiv class=\"feature-badges\"\u003e\n \u003cspan class=\"feature-badge\"\u003e80 mW\/cm2 at 6 in.\u003c\/span\u003e\n \u003cspan class=\"feature-badge\"\u003ePowered stand\u003c\/span\u003e\n \u003cspan class=\"feature-badge\"\u003e360 degree rotation\u003c\/span\u003e\n \u003c\/div\u003e\n \u003c\/div\u003e\n \u003c\/div\u003e\n\n \u003cdiv class=\"product-dive\"\u003e\n \u003cdiv class=\"product-dive__image\"\u003e\n \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0044\/9341\/0393\/files\/AdaptSystemComparisons.png?v=1788214156\" alt=\"BioLight Adapt System configuration comparison\" width=\"1500\" height=\"1500\" loading=\"lazy\"\u003e\n \u003c\/div\u003e\n \u003cdiv class=\"product-dive__body-wrap\"\u003e\n \u003cspan class=\"product-dive__badge\"\u003eConfiguration\u003c\/span\u003e\n \u003ch3 class=\"product-dive__title\"\u003eThree Ways to Buy It, and the Note You Send With the Order\u003c\/h3\u003e\n \u003cp class=\"product-dive__body\"\u003eBioLight offers the Adapt System as the pair, or as Adapt Table Only, or as Adapt Panel Only, under one option list. The two halves are separate units with their own dimensions, weights and irradiance figures, and each draws its own 1450W. Whichever configuration you take, the wavelengths are set by you: BioLight asks for a note on the order, or an email to their team, naming your preferred red wavelength between 620 and 750nm and your preferred near-infrared wavelength between 800 and 1,000nm. You can name more than one from each range.\u003c\/p\u003e\n \u003cul class=\"product-dive__list\"\u003e\n \u003cli\u003eAdapt System, Adapt Table Only or Adapt Panel Only\u003c\/li\u003e\n \u003cli\u003eRed wavelength chosen between 620 and 750nm\u003c\/li\u003e\n \u003cli\u003eNear-infrared wavelength chosen between 800 and 1,000nm\u003c\/li\u003e\n \u003cli\u003eOne or multiple wavelengths from each spectrum\u003c\/li\u003e\n \u003cli\u003eSpecified by order note or by email before the build\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cdiv class=\"feature-badges\"\u003e\n \u003cspan class=\"feature-badge\"\u003eThree configurations\u003c\/span\u003e\n \u003cspan class=\"feature-badge\"\u003eBuilt to your nm\u003c\/span\u003e\n \u003cspan class=\"feature-badge\"\u003eTable and panel sold apart\u003c\/span\u003e\n \u003c\/div\u003e\n \u003c\/div\u003e\n \u003c\/div\u003e\n\n \u003c\/div\u003e\n \u003c\/div\u003e\n \u003c\/section\u003e\n\n \u003csection class=\"section--cream\"\u003e\n \u003cdiv class=\"container\"\u003e\n \u003cp class=\"section__eyebrow\"\u003eCompare\u003c\/p\u003e\n \u003ch2 class=\"section__title\"\u003eThe Two Professional Systems BioLight Builds\u003c\/h2\u003e\n \u003cp class=\"section__lead\"\u003eThese are the two largest installations in the BioLight range. One publishes a full optical specification and lets you set the wavelengths; the other publishes almost none of it.\u003c\/p\u003e\n \u003cdiv class=\"compare__grid compare__grid--two\"\u003e\n\n \u003cdiv class=\"compare-card compare-card--current\"\u003e\n \u003cdiv class=\"compare-card__flag\"\u003eYou're Here\u003c\/div\u003e\n \u003cdiv class=\"compare-card__image\"\u003e\n \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0044\/9341\/0393\/files\/AdaptSystem.jpg?v=1788214155\" alt=\"BioLight Adapt System\" width=\"800\" height=\"800\" loading=\"lazy\"\u003e\n \u003c\/div\u003e\n \u003cdiv class=\"compare-card__name\"\u003eBioLight Adapt System\u003c\/div\u003e\n \u003cdiv class=\"compare-card__desc\"\u003eA table and panel pair, each with 1000 LEDs, where you pick your own red and near-infrared wavelengths within BioLight's 620-750nm and 800-1,000nm ranges.\u003c\/div\u003e\n \u003cdiv class=\"compare-card__feats\"\u003e\n \u003cspan class=\"compare-card__feat\"\u003e620-750nm and 800-1,000nm\u003c\/span\u003e\n \u003cspan class=\"compare-card__feat\"\u003e1000 LEDs per unit\u003c\/span\u003e\n \u003cspan class=\"compare-card__feat\"\u003ePanel 80 mW\/cm2 at 6 in.\u003c\/span\u003e\n \u003cspan class=\"compare-card__feat\"\u003e1-9,999 Hz pulsing\u003c\/span\u003e\n \u003c\/div\u003e\n \u003cspan class=\"compare-card__cta compare-card__cta--current\"\u003eCurrently viewing\u003c\/span\u003e\n \u003c\/div\u003e\n\n \u003cdiv class=\"compare-card\"\u003e\n \u003cdiv class=\"compare-card__image\"\u003e\n \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0044\/9341\/0393\/files\/pic7.png?v=1788214150\" alt=\"BioLight Arc System\" width=\"800\" height=\"800\" loading=\"lazy\"\u003e\n \u003c\/div\u003e\n \u003cdiv class=\"compare-card__name\"\u003eBioLight Arc System\u003c\/div\u003e\n \u003cdiv class=\"compare-card__desc\"\u003eA full-body platform with integrated heating, remote control and 110V or 220V input; BioLight publishes no wavelengths, LED count or irradiance for it.\u003c\/div\u003e\n \u003cdiv class=\"compare-card__feats\"\u003e\n \u003cspan class=\"compare-card__feat\"\u003e110V or 220V\u003c\/span\u003e\n \u003cspan class=\"compare-card__feat\"\u003eIntegrated heating function\u003c\/span\u003e\n \u003cspan class=\"compare-card__feat\"\u003eRemote control supported\u003c\/span\u003e\n \u003cspan class=\"compare-card__feat\"\u003eAdjustable brightness and pulsing\u003c\/span\u003e\n \u003c\/div\u003e\n \u003ca class=\"compare-card__cta\" href=\"\/products\/arc-system-professional-red-nir-full-body-recovery-system\"\u003eShop the BioLight Arc System\u003c\/a\u003e\n \u003c\/div\u003e\n\n \u003c\/div\u003e\n \u003c\/div\u003e\n \u003c\/section\u003e\n\n \u003csection class=\"section\"\u003e\n \u003cdiv class=\"container\"\u003e\n \u003cp class=\"section__eyebrow\"\u003eQuestions\u003c\/p\u003e\n \u003ch2 class=\"section__title\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n \u003cdiv class=\"faq__list\"\u003e\n\n \u003cdiv class=\"faq-item\"\u003e\n \u003cbutton type=\"button\"\u003e\n \u003cspan\u003eWhat wavelengths does the Adapt System run?\u003c\/span\u003e\n \u003cspan class=\"faq-icon\"\u003e+\u003c\/span\u003e\n \u003c\/button\u003e\n \u003cdiv class=\"faq-answer\"\u003e\n \u003cdiv class=\"faq-answer__inner\"\u003eBioLight publishes two windows to choose from: \u003cstrong\u003e620-750nm\u003c\/strong\u003e for red and \u003cstrong\u003e800-1,000nm\u003c\/strong\u003e for near-infrared. You choose. BioLight asks buyers to add a note to the order, or email their team, naming the preferred red wavelength and the preferred near-infrared wavelength, and states you can pick one or multiple wavelengths from each spectrum. No single nm figure is printed for this product anywhere on BioLight's page, and we have not substituted one.\u003c\/div\u003e\n \u003c\/div\u003e\n \u003c\/div\u003e\n\n \u003cdiv class=\"faq-item\"\u003e\n \u003cbutton type=\"button\"\u003e\n \u003cspan\u003eWhat is the difference between the Table, the Panel and the System?\u003c\/span\u003e\n \u003cspan class=\"faq-icon\"\u003e+\u003c\/span\u003e\n \u003c\/button\u003e\n \u003cdiv class=\"faq-answer\"\u003e\n \u003cdiv class=\"faq-answer__inner\"\u003eThey are two separate units and three ways to buy. The \u003cstrong\u003eAdapt Table\u003c\/strong\u003e is 75 in. x 27 in. x 7.7 in., 202 lbs, 1000 LEDs, rated for 600 lbs of load. The \u003cstrong\u003eAdapt Panel\u003c\/strong\u003e is 75 in. x 25 in. x 4 in., 206 lbs, its own 1000 LEDs, on a powered mobile stand that rotates 360 degrees. \u003cstrong\u003eAdapt System\u003c\/strong\u003e is both together. Table Only and Panel Only are each half on its own.\u003c\/div\u003e\n \u003c\/div\u003e\n \u003c\/div\u003e\n\n \u003cdiv class=\"faq-item\"\u003e\n \u003cbutton type=\"button\"\u003e\n \u003cspan\u003eWhy does the same 80 mW\/cm2 figure appear twice with different distances?\u003c\/span\u003e\n \u003cspan class=\"faq-icon\"\u003e+\u003c\/span\u003e\n \u003c\/button\u003e\n \u003cdiv class=\"faq-answer\"\u003e\n \u003cdiv class=\"faq-answer__inner\"\u003eBecause BioLight measured the two units differently. The table's \u003cstrong\u003e80 mW\/cm2 is stated at 0 in.\u003c\/strong\u003e, meaning at the surface. The panel's \u003cstrong\u003e80 mW\/cm2 is stated at 6 in.\u003c\/strong\u003e, six inches back from the face. An irradiance figure only means something with the distance attached, and these two are not the same statement even though the number matches. Both are BioLight's own published figures and we have printed each with the distance BioLight gave it.\u003c\/div\u003e\n \u003c\/div\u003e\n \u003c\/div\u003e\n\n \u003cdiv class=\"faq-item\"\u003e\n \u003cbutton type=\"button\"\u003e\n \u003cspan\u003eWhat is the panel's full irradiance table?\u003c\/span\u003e\n \u003cspan class=\"faq-icon\"\u003e+\u003c\/span\u003e\n \u003c\/button\u003e\n \u003cdiv class=\"faq-answer\"\u003e\n \u003cdiv class=\"faq-answer__inner\"\u003eMeasured at 6 in., BioLight publishes \u003cstrong\u003e80 mW\/cm2 at 100% intensity\u003c\/strong\u003e, 66 mW\/cm2 at 75%, 49 mW\/cm2 at 50%, 24 mW\/cm2 at 25% and 15 mW\/cm2 at 1%. BioLight publishes no equivalent ladder for the table, only the single 80 mW\/cm2 at 0 in. figure at 100%.\u003c\/div\u003e\n \u003c\/div\u003e\n \u003c\/div\u003e\n\n \u003cdiv class=\"faq-item\"\u003e\n \u003cbutton type=\"button\"\u003e\n \u003cspan\u003eWhat pulse frequencies will it run?\u003c\/span\u003e\n \u003cspan class=\"faq-icon\"\u003e+\u003c\/span\u003e\n \u003c\/button\u003e\n \u003cdiv class=\"faq-answer\"\u003e\n \u003cdiv class=\"faq-answer__inner\"\u003e\n\u003cstrong\u003e1 to 9,999 Hz\u003c\/strong\u003e, on both the table and the panel, as a continuous range. BioLight names no preset modes and publishes no recommended frequency for this product.\u003c\/div\u003e\n \u003c\/div\u003e\n \u003c\/div\u003e\n\n \u003cdiv class=\"faq-item\"\u003e\n \u003cbutton type=\"button\"\u003e\n \u003cspan\u003eWhat are the three light settings?\u003c\/span\u003e\n \u003cspan class=\"faq-icon\"\u003e+\u003c\/span\u003e\n \u003c\/button\u003e\n \u003cdiv class=\"faq-answer\"\u003e\n \u003cdiv class=\"faq-answer__inner\"\u003eRed and near-infrared together, red only, or near-infrared only. Both units carry the same three. Because near-infrared sits past the visible band, the near-infrared-only setting looks close to dark while it is running.\u003c\/div\u003e\n \u003c\/div\u003e\n \u003c\/div\u003e\n\n \u003cdiv class=\"faq-item\"\u003e\n \u003cbutton type=\"button\"\u003e\n \u003cspan\u003eHow much space does it need, and how heavy is it?\u003c\/span\u003e\n \u003cspan class=\"faq-icon\"\u003e+\u003c\/span\u003e\n \u003c\/button\u003e\n \u003cdiv class=\"faq-answer\"\u003e\n \u003cdiv class=\"faq-answer__inner\"\u003eThe table is \u003cstrong\u003e75 in. x 27 in. x 7.7 in.\u003c\/strong\u003e at \u003cstrong\u003e202 lbs\u003c\/strong\u003e. The panel is \u003cstrong\u003e75 in. x 25 in. x 4 in.\u003c\/strong\u003e at \u003cstrong\u003e206 lbs\u003c\/strong\u003e, plus its powered mobile stand. Maximum load on the table is \u003cstrong\u003e600 lbs\u003c\/strong\u003e. BioLight does not publish shipped dimensions or shipped weight for either unit, so plan the delivery route with us before the crate arrives.\u003c\/div\u003e\n \u003c\/div\u003e\n \u003c\/div\u003e\n\n \u003cdiv class=\"faq-item\"\u003e\n \u003cbutton type=\"button\"\u003e\n \u003cspan\u003eWhat power supply does it need?\u003c\/span\u003e\n \u003cspan class=\"faq-icon\"\u003e+\u003c\/span\u003e\n \u003c\/button\u003e\n \u003cdiv class=\"faq-answer\"\u003e\n \u003cdiv class=\"faq-answer__inner\"\u003eEach unit draws \u003cstrong\u003e1450W\u003c\/strong\u003e and accepts \u003cstrong\u003e100-240VAC at 50\/60Hz\u003c\/strong\u003e, which BioLight states covers both US and Canadian supply and international supply. If you run the table and the panel together, budget for both draws. BioLight does not publish a plug type.\u003c\/div\u003e\n \u003c\/div\u003e\n \u003c\/div\u003e\n\n \u003cdiv class=\"faq-item\"\u003e\n \u003cbutton type=\"button\"\u003e\n \u003cspan\u003eWhat does BioLight publish for flicker and EMF?\u003c\/span\u003e\n \u003cspan class=\"faq-icon\"\u003e+\u003c\/span\u003e\n \u003c\/button\u003e\n \u003cdiv class=\"faq-answer\"\u003e\n \u003cdiv class=\"faq-answer__inner\"\u003eLight flicker is given as \u003cstrong\u003e1.2% modulation at 60Hz\u003c\/strong\u003e on both units. EMF emission is given as \u003cstrong\u003e0.1 microtesla at 0 in.\u003c\/strong\u003e on both, and BioLight adds that at 6 in. and beyond the reading is close to zero. For scale, BioLight's own footnote lists roughly 2000 microtesla near a hairdryer or electric shaver, 800 near a vacuum cleaner and 50 near a washing machine or television.\u003c\/div\u003e\n \u003c\/div\u003e\n \u003c\/div\u003e\n\n \u003cdiv class=\"faq-item\"\u003e\n \u003cbutton type=\"button\"\u003e\n \u003cspan\u003eHow long is the warranty, and is there a return window?\u003c\/span\u003e\n \u003cspan class=\"faq-icon\"\u003e+\u003c\/span\u003e\n \u003c\/button\u003e\n \u003cdiv class=\"faq-answer\"\u003e\n \u003cdiv class=\"faq-answer__inner\"\u003eBioLight publishes a \u003cstrong\u003e5 year warranty\u003c\/strong\u003e and a \u003cstrong\u003e60 day return period\u003c\/strong\u003e for the Adapt System, and rates the LEDs at \u003cstrong\u003e100,000 hours\u003c\/strong\u003e. That is the longest warranty BioLight states on any device in this range.\u003c\/div\u003e\n \u003c\/div\u003e\n \u003c\/div\u003e\n\n \u003cdiv class=\"faq-item\"\u003e\n \u003cbutton type=\"button\"\u003e\n \u003cspan\u003eWhat ships in the box?\u003c\/span\u003e\n \u003cspan class=\"faq-icon\"\u003e+\u003c\/span\u003e\n \u003c\/button\u003e\n \u003cdiv class=\"faq-answer\"\u003e\n \u003cdiv class=\"faq-answer__inner\"\u003eBioLight does not publish a package contents list for either the Adapt Table or the Adapt Panel. Every other panel in their range has one; this page has none. Ask us to confirm the crate contents with BioLight before you order, and we will get it in writing.\u003c\/div\u003e\n \u003c\/div\u003e\n \u003c\/div\u003e\n\n \u003cdiv class=\"faq-item\"\u003e\n \u003cbutton type=\"button\"\u003e\n \u003cspan\u003eHow long is a session, and how often does BioLight suggest using it?\u003c\/span\u003e\n \u003cspan class=\"faq-icon\"\u003e+\u003c\/span\u003e\n \u003c\/button\u003e\n \u003cdiv class=\"faq-answer\"\u003e\n \u003cdiv class=\"faq-answer__inner\"\u003eBioLight states \u003cstrong\u003e10 to 20 minutes\u003c\/strong\u003e per session and suggests \u003cstrong\u003e3 to 5 times per week\u003c\/strong\u003e, or daily in a professional routine. Both units carry a programmable timer, so the duration is set on the device and runs itself out. That guidance is BioLight's own.\u003c\/div\u003e\n \u003c\/div\u003e\n \u003c\/div\u003e\n\n \u003c\/div\u003e\n \u003cp\u003eThe statements on this website have not been evaluated by the FDA (U.S. Food \u0026amp; Drug Administration). Our products are not intended to diagnose, treat, cure, or prevent any disease.\u003c\/p\u003e\n \u003c\/div\u003e\n \u003c\/section\u003e\n\n\u003c\/div\u003e","brand":"BioLight","offers":[{"title":"Adapt System","offer_id":49251143319803,"sku":"sku-42410322657430","price":40000.0,"currency_code":"USD","in_stock":true},{"title":"Adapt Table Only","offer_id":49251143352571,"sku":"sku-42410322591894","price":24900.0,"currency_code":"USD","in_stock":true},{"title":"Adapt Panel Only","offer_id":49251143385339,"sku":"sku-42410322624662","price":24900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0044\/9341\/0393\/files\/AdaptSystem.jpg?v=1788214155","url":"https:\/\/www.recoveryforathletes.com\/products\/adapt-system-professional-360-red-light-therapy-with-customizable-wavelengths-adjustable-frequencies","provider":"Recovery For Athletes","version":"1.0","type":"link"}