{"product_id":"inergize-spire-cold-plunge","title":"Inergize Spire Cold Plunge","description":"\u003cdiv class=\"product-pdp product-pdp--calm\"\u003e\n\n  \u003csection class=\"section\"\u003e\n    \u003cdiv class=\"container\"\u003e\n      \u003cdiv class=\"overview__grid\"\u003e\n        \u003cdiv class=\"overview__body\"\u003e\n          \u003cp class=\"section__eyebrow\"\u003eInergize Health\u003c\/p\u003e\n          \u003ch1 class=\"section__title\"\u003eInergize Spire Cold Plunge\u003c\/h1\u003e\n          \u003cp\u003eThe Spire is sold in two setups and you pick one from the dropdown. With Chiller ships the tub, the steps, the insulated lid and the chiller unit that sets and holds the water temperature. Tub Only ships the same tub, the same steps and the same lid, with no chiller in the crate. A Tub Only Spire holds whatever water you put in it at whatever temperature you put it in at, and holds no temperature of its own. Every temperature, filtration, ozone and app-control figure on this page belongs to the With Chiller setup, and is labelled that way each time it appears.\u003c\/p\u003e\n          \u003cp\u003eThe vessel is identical either way. A 316 marine-grade stainless interior sits inside a shell of sustainably sourced, wax-coated red cedar, with 2 in of bonded insulation on the steel surfaces. The seat is 12 in across, contoured, molded into the shell and angled back 10° from vertical, with 27 in of torso depth above it and 31 in of legroom below. Inergize publishes a fit range of 6'4\" neck-deep and 7 ft chest-deep, puts capacity at 120 gallons, and calls the footprint roughly 5 ft. It arrives assembled, and Inergize puts setup at about thirty minutes with no tools.\u003c\/p\u003e\n          \u003cdiv class=\"spec-banner\"\u003e\n            \u003cdiv class=\"spec-card\"\u003e\n              \u003cdiv class=\"spec-card__label\"\u003eChoose your setup\u003c\/div\u003e\n              \u003cdiv class=\"spec-card__value\"\u003eTwo setups\u003c\/div\u003e\n              \u003cdiv class=\"spec-card__sub\"\u003eWith Chiller, or Tub Only\u003c\/div\u003e\n            \u003c\/div\u003e\n            \u003cdiv class=\"spec-card\"\u003e\n              \u003cdiv class=\"spec-card__label\"\u003eWith Chiller\u003c\/div\u003e\n              \u003cdiv class=\"spec-card__value\"\u003e37°F\u003c\/div\u003e\n              \u003cdiv class=\"spec-card__sub\"\u003e104°F hot mode. Tub Only holds no temperature.\u003c\/div\u003e\n            \u003c\/div\u003e\n            \u003cdiv class=\"spec-card\"\u003e\n              \u003cdiv class=\"spec-card__label\"\u003eBoth setups\u003c\/div\u003e\n              \u003cdiv class=\"spec-card__value\"\u003e27 in deep\u003c\/div\u003e\n              \u003cdiv class=\"spec-card__sub\"\u003eTorso depth, with 31 in of legroom\u003c\/div\u003e\n            \u003c\/div\u003e\n            \u003cdiv class=\"spec-card\"\u003e\n              \u003cdiv class=\"spec-card__label\"\u003eBoth setups\u003c\/div\u003e\n              \u003cdiv class=\"spec-card__value\"\u003e120 gallons\u003c\/div\u003e\n              \u003cdiv class=\"spec-card__sub\"\u003eRoughly a 5 ft footprint for the tub\u003c\/div\u003e\n            \u003c\/div\u003e\n          \u003c\/div\u003e\n          \u003cdiv class=\"value-bar\"\u003e\n            \u003cspan class=\"value-bar__item\"\u003eChoose your setup: With Chiller or Tub Only\u003c\/span\u003e\n            \u003cspan class=\"value-bar__item\"\u003eTub Only holds no temperature by itself\u003c\/span\u003e\n            \u003cspan class=\"value-bar__item\"\u003e316 stainless interior, red cedar exterior, both setups\u003c\/span\u003e\n            \u003cspan class=\"value-bar__item\"\u003eFree crated curbside freight, contiguous US\u003c\/span\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"overview__image\"\u003e\n          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0044\/9341\/0393\/files\/hero-pool-house.jpg?v=1787954986\" alt=\"Inergize Spire cold plunge\" width=\"700\" height=\"700\" loading=\"eager\"\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"section--dark\"\u003e\n    \u003cdiv class=\"container\"\u003e\n      \u003cp class=\"section__eyebrow\"\u003eBuild\u003c\/p\u003e\n      \u003ch2 class=\"section__title\"\u003eWhat Changes Between the Setups, and What Never Does\u003c\/h2\u003e\n      \u003cp class=\"section__lead\"\u003eThe chiller is the only difference between the two setups. Everything you sit in and step on is the same unit either way. Here is what Inergize publishes on each side of that line.\u003c\/p\u003e\n      \u003cdiv class=\"tech__grid\"\u003e\n        \u003cdiv class=\"tech-card tech-card--accent\"\u003e\n          \u003cdiv class=\"tech-card__icon\"\u003e⚖\u003c\/div\u003e\n          \u003cdiv class=\"tech-card__title\"\u003eChoose Your Setup\u003c\/div\u003e\n          \u003cdiv class=\"tech-card__text\"\u003eWith Chiller adds the all-in-one chiller unit that stands beside the tub. Tub Only leaves it out and ships the tub, steps and lid alone, with no way to cool or heat the water. The tub, the steps and the lid are the same in both. If you want a plunge that reaches a set temperature, With Chiller is the setup that does it.\u003c\/div\u003e\n          \u003cspan class=\"tech-card__stat\"\u003eWith Chiller or Tub Only\u003c\/span\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"tech-card\"\u003e\n          \u003cdiv class=\"tech-card__icon\"\u003e🌡\u003c\/div\u003e\n          \u003cdiv class=\"tech-card__title\"\u003eWith Chiller: 37°F Cold, 104°F Hot\u003c\/div\u003e\n          \u003cdiv class=\"tech-card__text\"\u003eOn the With Chiller setup, one unit runs both directions: 37°F in cold plunge mode and 104°F in hot tub mode, switchable on the same hardware. The chiller also carries 4-way filtration, an ozone system and app control. None of this applies to Tub Only, which has no chiller and holds no temperature.\u003c\/div\u003e\n          \u003cspan class=\"tech-card__stat\"\u003eWith Chiller only\u003c\/span\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"tech-card\"\u003e\n          \u003cdiv class=\"tech-card__icon\"\u003e🪑\u003c\/div\u003e\n          \u003cdiv class=\"tech-card__title\"\u003eSeated Recline Geometry\u003c\/div\u003e\n          \u003cdiv class=\"tech-card__text\"\u003eA 12 in contoured seat molded into the shell, angled back 10° from vertical, with 27 in of torso depth above it and 31 in of legroom below. You sit upright with your back supported and your legs down. There is nothing to insert, inflate or position each time. This is the same in both setups.\u003c\/div\u003e\n          \u003cspan class=\"tech-card__stat\"\u003e10° recline, both setups\u003c\/span\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"tech-card\"\u003e\n          \u003cdiv class=\"tech-card__icon\"\u003e🔨\u003c\/div\u003e\n          \u003cdiv class=\"tech-card__title\"\u003e316 Stainless Inside, Red Cedar Outside\u003c\/div\u003e\n          \u003cdiv class=\"tech-card__text\"\u003eWater sits against 316 marine-grade stainless steel. Around it Inergize builds a shell of sustainably sourced, wax-coated red cedar, with 2 in of bonded insulation on the steel surfaces and a 3 in insulated lid on top. Inergize designs the Spire in Italy and builds it by hand. This is the same in both setups.\u003c\/div\u003e\n          \u003cspan class=\"tech-card__stat\"\u003eBoth setups\u003c\/span\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"section--cream\"\u003e\n    \u003cdiv class=\"container\"\u003e\n      \u003cp class=\"section__eyebrow\"\u003eWhat You Get\u003c\/p\u003e\n      \u003ch2 class=\"section__title\"\u003eEight Published Details, Each Marked to Its Setup\u003c\/h2\u003e\n      \u003cp class=\"section__lead\"\u003eSix of these ship in both crates. Two of them require the chiller and are tagged for it. Nothing here describes what cold water does to a body.\u003c\/p\u003e\n      \u003cdiv class=\"benefits__grid\"\u003e\n        \u003cdiv class=\"benefit-card\"\u003e\n          \u003cdiv class=\"benefit-card__icon\"\u003e🌿\u003c\/div\u003e\n          \u003cdiv class=\"benefit-card__title\"\u003eWax-coated red cedar over 316 stainless\u003c\/div\u003e\n          \u003cdiv class=\"benefit-card__tag\"\u003eBoth setups\u003c\/div\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"benefit-card\"\u003e\n          \u003cdiv class=\"benefit-card__icon benefit-card__icon--dark\"\u003e🧱\u003c\/div\u003e\n          \u003cdiv class=\"benefit-card__title\"\u003e2 in bonded insulation on the steel\u003c\/div\u003e\n          \u003cdiv class=\"benefit-card__tag\"\u003eBoth setups\u003c\/div\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"benefit-card\"\u003e\n          \u003cdiv class=\"benefit-card__icon\"\u003e🪑\u003c\/div\u003e\n          \u003cdiv class=\"benefit-card__title\"\u003e12 in contoured seat at 10° recline\u003c\/div\u003e\n          \u003cdiv class=\"benefit-card__tag\"\u003eBoth setups\u003c\/div\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"benefit-card\"\u003e\n          \u003cdiv class=\"benefit-card__icon\"\u003e📏\u003c\/div\u003e\n          \u003cdiv class=\"benefit-card__title\"\u003e27 in torso depth, 31 in legroom\u003c\/div\u003e\n          \u003cdiv class=\"benefit-card__tag\"\u003eBoth setups\u003c\/div\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"benefit-card\"\u003e\n          \u003cdiv class=\"benefit-card__icon benefit-card__icon--dark\"\u003e🔼\u003c\/div\u003e\n          \u003cdiv class=\"benefit-card__title\"\u003eThree cedar treads on a stainless frame\u003c\/div\u003e\n          \u003cdiv class=\"benefit-card__tag\"\u003eBoth setups\u003c\/div\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"benefit-card\"\u003e\n          \u003cdiv class=\"benefit-card__icon\"\u003e🔒\u003c\/div\u003e\n          \u003cdiv class=\"benefit-card__title\"\u003e3 in insulated lid, straps and handles\u003c\/div\u003e\n          \u003cdiv class=\"benefit-card__tag\"\u003eBoth setups\u003c\/div\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"benefit-card\"\u003e\n          \u003cdiv class=\"benefit-card__icon benefit-card__icon--dark\"\u003e🌡\u003c\/div\u003e\n          \u003cdiv class=\"benefit-card__title\"\u003e37°F cold plunge, 104°F hot mode\u003c\/div\u003e\n          \u003cdiv class=\"benefit-card__tag\"\u003eWith Chiller only\u003c\/div\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"benefit-card\"\u003e\n          \u003cdiv class=\"benefit-card__icon\"\u003e📱\u003c\/div\u003e\n          \u003cdiv class=\"benefit-card__title\"\u003e4-way filtration, ozone and app control\u003c\/div\u003e\n          \u003cdiv class=\"benefit-card__tag\"\u003eWith Chiller only\u003c\/div\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"section\"\u003e\n    \u003cdiv class=\"container\"\u003e\n      \u003cp class=\"section__eyebrow\"\u003eIn Detail\u003c\/p\u003e\n      \u003ch2 class=\"section__title\"\u003eThree Things Worth Looking At Closely\u003c\/h2\u003e\n      \u003cdiv class=\"product-dives\"\u003e\n\n        \u003cdiv class=\"product-dive\"\u003e\n          \u003cdiv class=\"product-dive__image\"\u003e\n            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0044\/9341\/0393\/files\/hero-man-neck-deep-angle.jpg?v=1787954986\" alt=\"Inergize Spire cold plunge\" width=\"700\" height=\"700\" loading=\"lazy\"\u003e\n          \u003c\/div\u003e\n          \u003cdiv class=\"product-dive__body-wrap\"\u003e\n            \u003cspan class=\"product-dive__badge\"\u003eSeat and Fit\u003c\/span\u003e\n            \u003ch3 class=\"product-dive__title\"\u003eA 12 Inch Seat, Reclined 10 Degrees From Vertical\u003c\/h3\u003e\n            \u003cp class=\"product-dive__body\"\u003eThe Spire has a seat molded into the shell, 12 inches across and contoured, angled back 10° from vertical. You sit on it with your back against the wall and your legs extended down into the well. Inergize gives the two measurements that decide whether that geometry works for your body: 27 in of torso depth from the seat up, and 31 in of legroom below it. Those two figures set the fit range Inergize publishes, 6'4\" neck-deep and 7 ft chest-deep. The seat, the depth and the legroom are the same on both setups, since the tub itself is one build.\u003c\/p\u003e\n            \u003cul class=\"product-dive__list\"\u003e\n              \u003cli\u003eBoth setups: 12 in contoured seat, molded into the shell\u003c\/li\u003e\n              \u003cli\u003eBoth setups: 10° recline from vertical, seat angled back into the wall\u003c\/li\u003e\n              \u003cli\u003eBoth setups: 27 in torso depth measured from the seat\u003c\/li\u003e\n              \u003cli\u003eBoth setups: 31 in legroom below the seat\u003c\/li\u003e\n              \u003cli\u003eBoth setups: Inergize's published fit range, 6'4\" neck-deep and 7 ft chest-deep\u003c\/li\u003e\n              \u003cli\u003eBoth setups: capacity 120 gallons, per Inergize\u003c\/li\u003e\n            \u003c\/ul\u003e\n            \u003cdiv class=\"feature-badges\"\u003e\n              \u003cspan class=\"feature-badge\"\u003e12 in seat\u003c\/span\u003e\n              \u003cspan class=\"feature-badge\"\u003e10° recline\u003c\/span\u003e\n              \u003cspan class=\"feature-badge\"\u003e31 in legroom\u003c\/span\u003e\n              \u003cspan class=\"feature-badge\"\u003eBoth setups\u003c\/span\u003e\n            \u003c\/div\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n\n        \u003cdiv class=\"product-dive product-dive--reverse\"\u003e\n          \u003cdiv class=\"product-dive__image\"\u003e\n            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0044\/9341\/0393\/files\/hero-garden.jpg?v=1787954985\" alt=\"Inergize Spire cold plunge\" width=\"700\" height=\"700\" loading=\"lazy\"\u003e\n          \u003c\/div\u003e\n          \u003cdiv class=\"product-dive__body-wrap\"\u003e\n            \u003cspan class=\"product-dive__badge\"\u003eMaterials and Entry\u003c\/span\u003e\n            \u003ch3 class=\"product-dive__title\"\u003eMarine-Grade Stainless Wrapped in Red Cedar\u003c\/h3\u003e\n            \u003cp class=\"product-dive__body\"\u003eWater sits against 316 marine-grade stainless steel, the alloy specified for marine hardware because of how it handles salt and chemistry. Around it Inergize builds a shell of sustainably sourced red cedar, wax-coated and assembled by hand, with 2 in of bonded insulation on the steel surfaces. The steps use the same two materials: three cedar treads on a 316 stainless frame, finished with anti-slip EVA grip mats, so you keep three points of contact from the ground outside the tub down to the seat. The lid closes the top with 3 in of insulated foam, dual Velcro secure straps, built-in handles and a 10 in windproof skirt over the rim. Inergize's dimension drawing puts the tub at 29 in wide, 61.56 in across including the steps, and 44 in tall. All of this ships in both setups.\u003c\/p\u003e\n            \u003cul class=\"product-dive__list\"\u003e\n              \u003cli\u003eBoth setups: 316 marine-grade stainless steel interior\u003c\/li\u003e\n              \u003cli\u003eBoth setups: sustainably sourced, wax-coated red cedar exterior\u003c\/li\u003e\n              \u003cli\u003eBoth setups: 2 in bonded insulation on the steel surfaces\u003c\/li\u003e\n              \u003cli\u003eBoth setups: three cedar treads on a 316 stainless frame with anti-slip EVA grip mats\u003c\/li\u003e\n              \u003cli\u003eBoth setups: 3 in insulated foam lid, all-weather, dual Velcro straps, handles, 10 in windproof skirt\u003c\/li\u003e\n              \u003cli\u003eBoth setups: 29 in wide, 61.56 in across with the steps, 44 in tall, from Inergize's dimension drawing\u003c\/li\u003e\n              \u003cli\u003eDesigned in Italy and built by hand, per Inergize\u003c\/li\u003e\n            \u003c\/ul\u003e\n            \u003cdiv class=\"feature-badges\"\u003e\n              \u003cspan class=\"feature-badge\"\u003e316 stainless\u003c\/span\u003e\n              \u003cspan class=\"feature-badge\"\u003eRed cedar\u003c\/span\u003e\n              \u003cspan class=\"feature-badge\"\u003eAnti-slip EVA grips\u003c\/span\u003e\n              \u003cspan class=\"feature-badge\"\u003e3 in insulated lid\u003c\/span\u003e\n            \u003c\/div\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n\n        \u003cdiv class=\"product-dive\"\u003e\n          \u003cdiv class=\"product-dive__image\"\u003e\n            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0044\/9341\/0393\/files\/hero-studio-with-chiller.jpg?v=1787954985\" alt=\"Inergize Spire cold plunge\" width=\"700\" height=\"700\" loading=\"lazy\"\u003e\n          \u003c\/div\u003e\n          \u003cdiv class=\"product-dive__body-wrap\"\u003e\n            \u003cspan class=\"product-dive__badge\"\u003eChoose Your Setup\u003c\/span\u003e\n            \u003ch3 class=\"product-dive__title\"\u003eOne Tub, Two Crates: With Chiller or Tub Only\u003c\/h3\u003e\n            \u003cp class=\"product-dive__body\"\u003eWith Chiller is the setup that makes cold water. It adds an all-in-one chiller unit that stands beside the tub and runs the water to 37°F in cold plunge mode or 104°F in hot tub mode, with 4-way filtration, an ozone system and app control on the same unit. Inergize supplies it with as much as 6 ft of insulated reinforced braided hose and caster wheels, so one person can roll it into position on any side of the tub. Tub Only is the same tub, steps and lid with the chiller left out. It has no cooling, no heating, no filtration, no ozone and no app, and the water inside it sits at whatever temperature you fill it to. Choose Tub Only when you already know how you plan to handle the water yourself.\u003c\/p\u003e\n            \u003cul class=\"product-dive__list\"\u003e\n              \u003cli\u003eWith Chiller ships: tub, steps, lid and the chiller unit\u003c\/li\u003e\n              \u003cli\u003eTub Only ships: tub, steps and lid, with no chiller\u003c\/li\u003e\n              \u003cli\u003eWith Chiller only: 37°F cold plunge mode and 104°F hot tub mode, one switchable unit\u003c\/li\u003e\n              \u003cli\u003eWith Chiller only: 4-way filtration and an ozone system\u003c\/li\u003e\n              \u003cli\u003eWith Chiller only: app control, per Inergize's own smart control section\u003c\/li\u003e\n              \u003cli\u003eWith Chiller only: 6 ft of insulated reinforced braided hose and caster wheels for placement\u003c\/li\u003e\n              \u003cli\u003eWith Chiller only: combined footprints from Inergize's two layout drawings, balanced roughly 76 in by 50 in and lateral roughly 97 in by 28 in\u003c\/li\u003e\n              \u003cli\u003eTub Only: holds no temperature of its own\u003c\/li\u003e\n            \u003c\/ul\u003e\n            \u003cdiv class=\"feature-badges\"\u003e\n              \u003cspan class=\"feature-badge\"\u003eWith Chiller: 37°F to 104°F\u003c\/span\u003e\n              \u003cspan class=\"feature-badge\"\u003eWith Chiller: 4-way filtration\u003c\/span\u003e\n              \u003cspan class=\"feature-badge\"\u003eWith Chiller: app controlled\u003c\/span\u003e\n              \u003cspan class=\"feature-badge\"\u003eTub Only: no chiller\u003c\/span\u003e\n            \u003c\/div\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"section--cream\"\u003e\n    \u003cdiv class=\"container\"\u003e\n      \u003cp class=\"section__eyebrow\"\u003eTwo Inergize Tubs\u003c\/p\u003e\n      \u003ch2 class=\"section__title\"\u003eSpire, or the Inergize Cold Plunge Tub\u003c\/h2\u003e\n      \u003cp class=\"section__lead\"\u003eInergize builds these in two different shapes, and each one suits a different room. The Spire is the cedar-and-stainless seated build, sold here in two setups so you decide whether the chiller comes with it. The Inergize Cold Plunge Tub is the portable modular one, 30 in deep, with hot and cold function. Read what separates them and pick the shape that fits how you want to use it.\u003c\/p\u003e\n      \u003cdiv class=\"compare__grid compare__grid--two\"\u003e\n        \u003cdiv class=\"compare-card compare-card--current\"\u003e\n          \u003cdiv class=\"compare-card__flag\"\u003eYou're Here\u003c\/div\u003e\n          \u003cdiv class=\"compare-card__image\"\u003e\n            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0044\/9341\/0393\/files\/hero-studio-no-chiller.jpg?v=1787954986\" alt=\"Inergize Spire cold plunge\" width=\"700\" height=\"700\" loading=\"lazy\"\u003e\n          \u003c\/div\u003e\n          \u003cdiv class=\"compare-card__name\"\u003eSpire\u003c\/div\u003e\n          \u003cdiv class=\"compare-card__desc\"\u003eCedar over 316 stainless, seated recline and cedar steps. Choose it with or without the chiller.\u003c\/div\u003e\n          \u003cdiv class=\"compare-card__feats\"\u003e\n            \u003cspan class=\"compare-card__feat\"\u003eSeated recline\u003c\/span\u003e\n            \u003cspan class=\"compare-card__feat\"\u003e27 in torso depth\u003c\/span\u003e\n            \u003cspan class=\"compare-card__feat\"\u003eTwo setups\u003c\/span\u003e\n          \u003c\/div\u003e\n          \u003cspan class=\"compare-card__cta compare-card__cta--current\"\u003eCurrently viewing\u003c\/span\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"compare-card\"\u003e\n          \u003cdiv class=\"compare-card__image\"\u003e\n            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0044\/9341\/0393\/files\/Inergize_Cold_Plunge_2.jpg?v=1725927691\" alt=\"Inergize Cold Plunge Tub\" width=\"700\" height=\"700\" loading=\"lazy\"\u003e\n          \u003c\/div\u003e\n          \u003cdiv class=\"compare-card__name\"\u003eInergize Cold Plunge Tub\u003c\/div\u003e\n          \u003cdiv class=\"compare-card__desc\"\u003eThe portable modular tub, 30 in deep, with hot and cold function.\u003c\/div\u003e\n          \u003cdiv class=\"compare-card__feats\"\u003e\n            \u003cspan class=\"compare-card__feat\"\u003ePortable\u003c\/span\u003e\n            \u003cspan class=\"compare-card__feat\"\u003e30 in deep\u003c\/span\u003e\n            \u003cspan class=\"compare-card__feat\"\u003eHot and cold\u003c\/span\u003e\n          \u003c\/div\u003e\n          \u003ca class=\"compare-card__cta\" href=\"\/products\/inergize-cold-plunge-tub\"\u003eShop the Inergize Cold Plunge Tub\u003c\/a\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"section\"\u003e\n    \u003cdiv class=\"container\"\u003e\n      \u003cp class=\"section__eyebrow\"\u003eQuestions\u003c\/p\u003e\n      \u003ch2 class=\"section__title\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n      \u003cdiv class=\"faq__list\"\u003e\n\n        \u003cdiv class=\"faq-item\"\u003e\n          \u003cbutton type=\"button\"\u003e\n            \u003cspan\u003eWhat is the difference between the two setups?\u003c\/span\u003e\n            \u003cspan class=\"faq-icon\"\u003e+\u003c\/span\u003e\n          \u003c\/button\u003e\n          \u003cdiv class=\"faq-answer\"\u003e\n            \u003cdiv class=\"faq-answer__inner\"\u003eThe chiller, and nothing else. \u003cstrong\u003eWith Chiller\u003c\/strong\u003e ships the tub, the steps, the insulated lid and the chiller unit that sets and holds the water temperature. \u003cstrong\u003eTub Only\u003c\/strong\u003e ships the same tub, the same steps and the same lid, with no chiller. Cedar, 316 stainless, the 12 in seat, the 10° recline, the 27 in torso depth, the 31 in legroom and the 3 in lid are identical in both.\u003c\/div\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n\n        \u003cdiv class=\"faq-item\"\u003e\n          \u003cbutton type=\"button\"\u003e\n            \u003cspan\u003eDoes the Tub Only setup get cold on its own?\u003c\/span\u003e\n            \u003cspan class=\"faq-icon\"\u003e+\u003c\/span\u003e\n          \u003c\/button\u003e\n          \u003cdiv class=\"faq-answer\"\u003e\n            \u003cdiv class=\"faq-answer__inner\"\u003e\n\u003cstrong\u003eNo.\u003c\/strong\u003e Tub Only holds no temperature of its own. It is an insulated vessel that keeps the water you put in it at whatever temperature you put it in at, and it has no cooling, no heating, no filtration, no ozone and no app. If you want a plunge that reaches and holds a set temperature, choose \u003cstrong\u003eWith Chiller\u003c\/strong\u003e. This is the single most common misunderstanding on this product, so please read it before you order.\u003c\/div\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n\n        \u003cdiv class=\"faq-item\"\u003e\n          \u003cbutton type=\"button\"\u003e\n            \u003cspan\u003eHow cold and how warm does the With Chiller setup run?\u003c\/span\u003e\n            \u003cspan class=\"faq-icon\"\u003e+\u003c\/span\u003e\n          \u003c\/button\u003e\n          \u003cdiv class=\"faq-answer\"\u003e\n            \u003cdiv class=\"faq-answer__inner\"\u003eOn the \u003cstrong\u003eWith Chiller\u003c\/strong\u003e setup, Inergize publishes \u003cstrong\u003e37°F\u003c\/strong\u003e in cold plunge mode and \u003cstrong\u003e104°F\u003c\/strong\u003e in hot tub mode, from one switchable unit. That is the range of the equipment. We publish no recommended temperature, duration or frequency for using it, and neither figure applies to the Tub Only setup.\u003c\/div\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n\n        \u003cdiv class=\"faq-item\"\u003e\n          \u003cbutton type=\"button\"\u003e\n            \u003cspan\u003eWhat does the chiller handle beyond temperature?\u003c\/span\u003e\n            \u003cspan class=\"faq-icon\"\u003e+\u003c\/span\u003e\n          \u003c\/button\u003e\n          \u003cdiv class=\"faq-answer\"\u003e\n            \u003cdiv class=\"faq-answer__inner\"\u003eOn the \u003cstrong\u003eWith Chiller\u003c\/strong\u003e setup the same unit carries \u003cstrong\u003e4-way filtration\u003c\/strong\u003e, an ozone system and app control. Inergize describes the filtration as keeping water clean for months; that is their claim and their wording. Inergize does not publish an ozone output figure we can quote, so we quote none. All three belong to the chiller, which means the \u003cstrong\u003eTub Only\u003c\/strong\u003e setup has none of them.\u003c\/div\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n\n        \u003cdiv class=\"faq-item\"\u003e\n          \u003cbutton type=\"button\"\u003e\n            \u003cspan\u003eIf I choose Tub Only, can I add a chiller later?\u003c\/span\u003e\n            \u003cspan class=\"faq-icon\"\u003e+\u003c\/span\u003e\n          \u003c\/button\u003e\n          \u003cdiv class=\"faq-answer\"\u003e\n            \u003cdiv class=\"faq-answer__inner\"\u003eNothing in the Tub Only crate prepares the water, and nothing in it can be switched on later to do so. If a chiller is in your plan at all, the straightforward route is to \u003cstrong\u003eorder the With Chiller setup up front\u003c\/strong\u003e. If you have a reason to start with the tub alone, contact us first and we will confirm current chiller availability with Inergize in writing before you place the order.\u003c\/div\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n\n        \u003cdiv class=\"faq-item\"\u003e\n          \u003cbutton type=\"button\"\u003e\n            \u003cspan\u003eWill I fit in it?\u003c\/span\u003e\n            \u003cspan class=\"faq-icon\"\u003e+\u003c\/span\u003e\n          \u003c\/button\u003e\n          \u003cdiv class=\"faq-answer\"\u003e\n            \u003cdiv class=\"faq-answer__inner\"\u003eInergize publishes a fit range of \u003cstrong\u003e6'4\" neck-deep and 7 ft chest-deep\u003c\/strong\u003e. The measurements behind that are 27 in of torso depth above the seat and 31 in of legroom below it, on a 12 in contoured seat angled back 10° from vertical. If you are near either end of that range, measure your seated torso height against the 27 in figure before you order. The geometry is the same on both setups.\u003c\/div\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n\n        \u003cdiv class=\"faq-item\"\u003e\n          \u003cbutton type=\"button\"\u003e\n            \u003cspan\u003eHow do I get in and out?\u003c\/span\u003e\n            \u003cspan class=\"faq-icon\"\u003e+\u003c\/span\u003e\n          \u003c\/button\u003e\n          \u003cdiv class=\"faq-answer\"\u003e\n            \u003cdiv class=\"faq-answer__inner\"\u003eThrough a \u003cstrong\u003ethree-step entry\u003c\/strong\u003e made of cedar treads on a 316 stainless steel frame, with anti-slip EVA grip mats on the treads. Inergize builds it so you keep three points of contact from the ground outside the tub the whole way down to the seat. The steps are included in both setups.\u003c\/div\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n\n        \u003cdiv class=\"faq-item\"\u003e\n          \u003cbutton type=\"button\"\u003e\n            \u003cspan\u003eWhat is the tub made of, and how does the lid work?\u003c\/span\u003e\n            \u003cspan class=\"faq-icon\"\u003e+\u003c\/span\u003e\n          \u003c\/button\u003e\n          \u003cdiv class=\"faq-answer\"\u003e\n            \u003cdiv class=\"faq-answer__inner\"\u003eA \u003cstrong\u003e316 marine-grade stainless steel\u003c\/strong\u003e interior inside a shell of sustainably sourced, wax-coated red cedar, with 2 in of bonded insulation on the steel surfaces. The lid is \u003cstrong\u003e3 in of insulated foam\u003c\/strong\u003e, rated all-weather, secured with dual Velcro straps, carrying built-in handles and a 10 in windproof skirt that drops over the rim. Inergize designs the Spire in Italy and builds it by hand. Both setups get all of it.\u003c\/div\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n\n        \u003cdiv class=\"faq-item\"\u003e\n          \u003cbutton type=\"button\"\u003e\n            \u003cspan\u003eHow much water does it hold?\u003c\/span\u003e\n            \u003cspan class=\"faq-icon\"\u003e+\u003c\/span\u003e\n          \u003c\/button\u003e\n          \u003cdiv class=\"faq-answer\"\u003e\n            \u003cdiv class=\"faq-answer__inner\"\u003eInergize publishes \u003cstrong\u003e120 gallons\u003c\/strong\u003e, and that figure applies to both setups since the tub is one build. If floor loading matters where you are placing it, work from 120 gallons of water plus the weight of the tub and ask us for the shipping weight before you commit to a location.\u003c\/div\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n\n        \u003cdiv class=\"faq-item\"\u003e\n          \u003cbutton type=\"button\"\u003e\n            \u003cspan\u003eHow much room does it need?\u003c\/span\u003e\n            \u003cspan class=\"faq-icon\"\u003e+\u003c\/span\u003e\n          \u003c\/button\u003e\n          \u003cdiv class=\"faq-answer\"\u003e\n            \u003cdiv class=\"faq-answer__inner\"\u003eThe tub itself is roughly a \u003cstrong\u003e5 ft footprint\u003c\/strong\u003e, and Inergize's dimension drawing reads 29 in wide, 61.56 in across including the steps, and 44 in tall. On the \u003cstrong\u003eWith Chiller\u003c\/strong\u003e setup you also have to place the chiller, and Inergize's two layout drawings give a balanced arrangement of roughly 76 in by 50 in and a lateral arrangement of roughly 97 in by 28 in. The chiller connects on as much as 6 ft of hose and rolls on casters, so either side of the tub works.\u003c\/div\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n\n        \u003cdiv class=\"faq-item\"\u003e\n          \u003cbutton type=\"button\"\u003e\n            \u003cspan\u003eCan it live outdoors?\u003c\/span\u003e\n            \u003cspan class=\"faq-icon\"\u003e+\u003c\/span\u003e\n          \u003c\/button\u003e\n          \u003cdiv class=\"faq-answer\"\u003e\n            \u003cdiv class=\"faq-answer__inner\"\u003eInergize rates the Spire for \u003cstrong\u003eindoor and outdoor use\u003c\/strong\u003e. The cedar is wax-coated, the interior and the step frame are 316 marine-grade stainless, and the lid is all-weather with the windproof skirt. If you are placing it outside, talk to us about siting, drainage and, on the With Chiller setup, where the power reaches, before delivery day.\u003c\/div\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n\n        \u003cdiv class=\"faq-item\"\u003e\n          \u003cbutton type=\"button\"\u003e\n            \u003cspan\u003eHow much assembly is there?\u003c\/span\u003e\n            \u003cspan class=\"faq-icon\"\u003e+\u003c\/span\u003e\n          \u003c\/button\u003e\n          \u003cdiv class=\"faq-answer\"\u003e\n            \u003cdiv class=\"faq-answer__inner\"\u003eIt \u003cstrong\u003earrives assembled\u003c\/strong\u003e. Inergize puts setup at about thirty minutes with no tools. On the With Chiller setup that covers positioning the tub and steps, connecting the chiller hoses, filling from a garden hose and plugging in. On Tub Only there are no hoses and no power, so you are positioning the tub, setting the steps and filling it.\u003c\/div\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n\n        \u003cdiv class=\"faq-item\"\u003e\n          \u003cbutton type=\"button\"\u003e\n            \u003cspan\u003eHow does it ship, and who moves it off the pallet?\u003c\/span\u003e\n            \u003cspan class=\"faq-icon\"\u003e+\u003c\/span\u003e\n          \u003c\/button\u003e\n          \u003cdiv class=\"faq-answer\"\u003e\n            \u003cdiv class=\"faq-answer__inner\"\u003eAs \u003cstrong\u003ecrated curbside freight\u003c\/strong\u003e, free within the contiguous US, scheduled with you and dropped at the curb of the address on your order. Inergize is explicit that moving the tank off the pallet and to its final location on the property is \u003cstrong\u003ethe customer's responsibility\u003c\/strong\u003e. Plan for more than one person, a clear route and something to roll it on, and measure gates, doorways and turns against the 29 in width first.\u003c\/div\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n\n        \u003cdiv class=\"faq-item\"\u003e\n          \u003cbutton type=\"button\"\u003e\n            \u003cspan\u003eShould I speak to anyone before starting cold-water immersion?\u003c\/span\u003e\n            \u003cspan class=\"faq-icon\"\u003e+\u003c\/span\u003e\n          \u003c\/button\u003e\n          \u003cdiv class=\"faq-answer\"\u003e\n            \u003cdiv class=\"faq-answer__inner\"\u003eYes. Talk with a \u003cstrong\u003equalified health professional\u003c\/strong\u003e about cold-water immersion before you begin, and follow their guidance on how you use it. We sell the equipment and leave that advice to them.\u003c\/div\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n\u003c\/div\u003e\n","brand":"Inergize","offers":[{"title":"Tub Only","offer_id":49234586009851,"sku":"IH-SP-S01","price":5990.0,"currency_code":"USD","in_stock":true},{"title":"With Chiller","offer_id":49234585977083,"sku":"IH-INER-SP-ELT","price":7990.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0044\/9341\/0393\/files\/hero-studio-no-chiller.jpg?v=1787954986","url":"https:\/\/www.recoveryforathletes.com\/products\/inergize-spire-cold-plunge","provider":"Recovery For Athletes","version":"1.0","type":"link"}