{"product_id":"restore-full-body-red-light-therapy-panel-touch-screen-adjustable-brightness-pulsed-frequencies","title":"BioLight ReStore Full-Body Red Light Therapy Panel: Touch Screen, Adjustable Brightness \u0026 Pulsed Frequencies","description":"\u003cdiv class=\"product-pdp product-pdp--calm\"\u003e\n\n  \u003csection class=\"section\"\u003e\n    \u003cdiv class=\"container\"\u003e\n      \u003cdiv class=\"overview__grid\"\u003e\n        \u003cdiv class=\"overview__body\"\u003e\n          \u003cp class=\"section__eyebrow\"\u003eBioLight | ReStore\u003c\/p\u003e\n          \u003ch1 class=\"section__title\"\u003eBioLight ReStore Full-Body Panel\u003c\/h1\u003e\n          \u003cp\u003eThe ReStore is a 36 in. by 12 in. panel carrying 300 LEDs at 660nm red and 850nm near-infrared, and the control that separates it from a plain emitter is the pulse rate. Every LED can be switched on and off at a rate you set, anywhere up to 10,000 cycles per second, or left running continuously. That single control is what the touchscreen on the front is mostly there to reach.\u003c\/p\u003e\n          \u003cp\u003eBioLight quotes its output at 56.9 mW\/cm2 at 6 in. at full brightness, and publishes the whole ladder underneath it: 56.5 mW\/cm2 at 75%, 44 at 50%, 32 at 25% and 13 at 1%, all at the same 6 in. The panel is 3 in. deep, weighs 18 lbs, draws 476W through 8 cooling fans, and takes 100-240VAC at 50\/60Hz. It ships with both a floor stand on wheels and a door hanging kit, which is the only device in BioLight's range that arrives with two mounting options in the same box.\u003c\/p\u003e\n          \u003cdiv class=\"spec-banner\"\u003e\n            \u003cdiv class=\"spec-card\"\u003e\n              \u003cdiv class=\"spec-card__label\"\u003eLED Count\u003c\/div\u003e\n              \u003cdiv class=\"spec-card__value\"\u003e300\u003c\/div\u003e\n              \u003cdiv class=\"spec-card__sub\"\u003e660nm red, 850nm near-infrared\u003c\/div\u003e\n            \u003c\/div\u003e\n            \u003cdiv class=\"spec-card\"\u003e\n              \u003cdiv class=\"spec-card__label\"\u003eIrradiance\u003c\/div\u003e\n              \u003cdiv class=\"spec-card__value\"\u003e56.9 mW\/cm2\u003c\/div\u003e\n              \u003cdiv class=\"spec-card__sub\"\u003eAt 6 in., 100% brightness\u003c\/div\u003e\n            \u003c\/div\u003e\n            \u003cdiv class=\"spec-card\"\u003e\n              \u003cdiv class=\"spec-card__label\"\u003ePanel Face\u003c\/div\u003e\n              \u003cdiv class=\"spec-card__value\"\u003e36 x 12 in.\u003c\/div\u003e\n              \u003cdiv class=\"spec-card__sub\"\u003e3 in. deep, 18 lbs\u003c\/div\u003e\n            \u003c\/div\u003e\n            \u003cdiv class=\"spec-card\"\u003e\n              \u003cdiv class=\"spec-card__label\"\u003ePulse Rate\u003c\/div\u003e\n              \u003cdiv class=\"spec-card__value\"\u003eTo 10,000 Hz\u003c\/div\u003e\n              \u003cdiv class=\"spec-card__sub\"\u003eSet on the touchscreen\u003c\/div\u003e\n            \u003c\/div\u003e\n          \u003c\/div\u003e\n          \u003cdiv class=\"value-bar\"\u003e\n            \u003cspan class=\"value-bar__item\"\u003ePulse rate set by hand\u003c\/span\u003e\n            \u003cspan class=\"value-bar__item\"\u003eBrightness 1 to 100%\u003c\/span\u003e\n            \u003cspan class=\"value-bar__item\"\u003eFloor stand and door hanger included\u003c\/span\u003e\n            \u003cspan class=\"value-bar__item\"\u003e476W through 8 fans\u003c\/span\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"overview__image\"\u003e\n          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0044\/9341\/0393\/files\/6_8580e4c6-fc7c-42fa-b445-7278c609e728.jpg?v=1788214156\" alt=\"BioLight ReStore full-body red light panel\" width=\"1200\" height=\"1200\" loading=\"eager\"\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"section--dark\"\u003e\n    \u003cdiv class=\"container\"\u003e\n      \u003cp class=\"section__eyebrow\"\u003eThe pulse control\u003c\/p\u003e\n      \u003ch2 class=\"section__title\"\u003eWhat It Means to Pulse a Light Source\u003c\/h2\u003e\n      \u003cp class=\"section__lead\"\u003eMost light panels run continuous wave: the diodes are on for the whole session. The ReStore can also run pulsed, switching every LED on and off at a rate you choose. Here is what that setting is, and what BioLight does and does not publish about it.\u003c\/p\u003e\n      \u003cdiv class=\"tech__grid\"\u003e\n        \u003cdiv class=\"tech-card tech-card--accent\"\u003e\n          \u003cdiv class=\"tech-card__icon\"\u003e〰\u003c\/div\u003e\n          \u003cdiv class=\"tech-card__title\"\u003eHertz Is a Count of On-Off Cycles\u003c\/div\u003e\n          \u003cdiv class=\"tech-card__text\"\u003eA pulsed emitter switches off and on again at a fixed rate, and the Hz figure counts how many of those cycles happen in one second. At 10 Hz an LED completes ten cycles a second. At 10,000 Hz a cycle lasts one ten-thousandth of a second, far too fast for an eye to resolve, so the panel looks steady while it is pulsing. Because the diode spends part of each cycle dark, a pulsed session puts less total energy on a surface than a continuous session of the same length at the same brightness. BioLight publishes the range and nothing beyond it: no preset modes and no recommended frequency. Their own page attaches an outcome claim to one specific frequency and names no author, journal, year or identifier for it, so that passage is not on this page.\u003c\/div\u003e\n          \u003cspan class=\"tech-card__stat\"\u003eUp to 10,000 cycles per second\u003c\/span\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"tech-card\"\u003e\n          \u003cdiv class=\"tech-card__icon\"\u003e💡\u003c\/div\u003e\n          \u003cdiv class=\"tech-card__title\"\u003e300 LEDs at 660nm and 850nm\u003c\/div\u003e\n          \u003cdiv class=\"tech-card__text\"\u003eThree hundred emitters across a 36 in. by 12 in. face, each behind a 30 degree focusing lens that narrows its output cone forward. BioLight calls the emitter their patent-pending Dual LED technology and describes each diode as capable of producing both wavelengths. That is BioLight's own description of their own component, and they publish no patent or application number alongside it.\u003c\/div\u003e\n          \u003cspan class=\"tech-card__stat\"\u003e30 degree focusing lens\u003c\/span\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"tech-card\"\u003e\n          \u003cdiv class=\"tech-card__icon\"\u003e📈\u003c\/div\u003e\n          \u003cdiv class=\"tech-card__title\"\u003eThe Full Ladder at 6 Inches\u003c\/div\u003e\n          \u003cdiv class=\"tech-card__text\"\u003eBioLight publishes an irradiance figure for every brightness step, all measured at the same 6 in.: 56.9 mW\/cm2 at 100% brightness, 56.5 at 75%, 44 at 50%, 32 at 25% and 13 at 1%. The distance is the part that makes the ladder readable, and BioLight quoting all five at 6 in. is what lets the five be compared with each other.\u003c\/div\u003e\n          \u003cspan class=\"tech-card__stat\"\u003e56.9 mW\/cm2 at 6 in.\u003c\/span\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"tech-card\"\u003e\n          \u003cdiv class=\"tech-card__icon\"\u003e🌪\u003c\/div\u003e\n          \u003cdiv class=\"tech-card__title\"\u003e476W, 8 Fans, One Touchscreen\u003c\/div\u003e\n          \u003cdiv class=\"tech-card__text\"\u003eBioLight removed the physical buttons on this generation and put brightness, light setting, pulse rate and timer on a touchscreen. Behind it, 8 fans handle the heat of a 476W array, and the panel takes 100-240VAC at 50\/60Hz so it runs on North American and international supply. Published light flicker is 1.2% modulation at 60Hz and LED lifespan is 100,000 hours.\u003c\/div\u003e\n          \u003cspan class=\"tech-card__stat\"\u003e8 cooling fans\u003c\/span\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"section--cream\"\u003e\n    \u003cdiv class=\"container\"\u003e\n      \u003cp class=\"section__eyebrow\"\u003eThe numbers\u003c\/p\u003e\n      \u003ch2 class=\"section__title\"\u003eEight Figures From BioLight's ReStore Specification\u003c\/h2\u003e\n      \u003cp class=\"section__lead\"\u003eEvery irradiance figure below is quoted at 6 in., the distance BioLight measured this panel at.\u003c\/p\u003e\n      \u003cdiv class=\"benefits__grid\"\u003e\n        \u003cdiv class=\"benefit-card\"\u003e\n          \u003cdiv class=\"benefit-card__icon\"\u003e💡\u003c\/div\u003e\n          \u003cdiv class=\"benefit-card__title\"\u003e300 LEDs\u003c\/div\u003e\n          \u003cdiv class=\"benefit-card__tag\"\u003e36 in. x 12 in. face\u003c\/div\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"benefit-card\"\u003e\n          \u003cdiv class=\"benefit-card__icon benefit-card__icon--dark\"\u003e📈\u003c\/div\u003e\n          \u003cdiv class=\"benefit-card__title\"\u003e56.9 mW\/cm2 at 6 in.\u003c\/div\u003e\n          \u003cdiv class=\"benefit-card__tag\"\u003e100% brightness\u003c\/div\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"benefit-card\"\u003e\n          \u003cdiv class=\"benefit-card__icon\"\u003e🌈\u003c\/div\u003e\n          \u003cdiv class=\"benefit-card__title\"\u003e660nm red, 850nm near-infrared\u003c\/div\u003e\n          \u003cdiv class=\"benefit-card__tag\"\u003eThree light settings\u003c\/div\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"benefit-card\"\u003e\n          \u003cdiv class=\"benefit-card__icon benefit-card__icon--dark\"\u003e〰\u003c\/div\u003e\n          \u003cdiv class=\"benefit-card__title\"\u003ePulse rate up to 10,000 Hz\u003c\/div\u003e\n          \u003cdiv class=\"benefit-card__tag\"\u003eOr continuous\u003c\/div\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"benefit-card\"\u003e\n          \u003cdiv class=\"benefit-card__icon\"\u003e🎚\u003c\/div\u003e\n          \u003cdiv class=\"benefit-card__title\"\u003eBrightness 1 to 100%\u003c\/div\u003e\n          \u003cdiv class=\"benefit-card__tag\"\u003eFive published steps\u003c\/div\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"benefit-card\"\u003e\n          \u003cdiv class=\"benefit-card__icon benefit-card__icon--dark\"\u003e🔍\u003c\/div\u003e\n          \u003cdiv class=\"benefit-card__title\"\u003e30 degree focusing lens\u003c\/div\u003e\n          \u003cdiv class=\"benefit-card__tag\"\u003eBeam angle per LED\u003c\/div\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"benefit-card\"\u003e\n          \u003cdiv class=\"benefit-card__icon\"\u003e🌪\u003c\/div\u003e\n          \u003cdiv class=\"benefit-card__title\"\u003e476W through 8 fans\u003c\/div\u003e\n          \u003cdiv class=\"benefit-card__tag\"\u003e100-240VAC at 50\/60Hz\u003c\/div\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"benefit-card\"\u003e\n          \u003cdiv class=\"benefit-card__icon\"\u003e🛡\u003c\/div\u003e\n          \u003cdiv class=\"benefit-card__title\"\u003e18 lbs, 100,000 hour LEDs\u003c\/div\u003e\n          \u003cdiv class=\"benefit-card__tag\"\u003e3 year warranty, 60 day return\u003c\/div\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"section\"\u003e\n    \u003cdiv class=\"container\"\u003e\n      \u003cp class=\"section__eyebrow\"\u003eCloser look\u003c\/p\u003e\n      \u003ch2 class=\"section__title\"\u003eThe Face, the Screen and the Two Ways to Hang It\u003c\/h2\u003e\n      \u003cdiv class=\"product-dives\"\u003e\n\n        \u003cdiv class=\"product-dive\"\u003e\n          \u003cdiv class=\"product-dive__image\"\u003e\n            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0044\/9341\/0393\/files\/4_54abc43d-597f-431b-8fb9-5cb9cdc461d1.jpg?v=1788214156\" alt=\"BioLight ReStore panel face with 300 LEDs\" width=\"1500\" height=\"1500\" loading=\"lazy\"\u003e\n          \u003c\/div\u003e\n          \u003cdiv class=\"product-dive__body-wrap\"\u003e\n            \u003cspan class=\"product-dive__badge\"\u003eThe panel\u003c\/span\u003e\n            \u003ch3 class=\"product-dive__title\"\u003eThree Hundred Emitters Across Three Feet\u003c\/h3\u003e\n            \u003cp class=\"product-dive__body\"\u003eThe ReStore's face is 36 in. tall and 12 in. wide on a 3 in. body, with 300 LEDs across it running 660nm red and 850nm near-infrared. Each LED sits behind a 30 degree focusing lens, which pushes more of its cone forward at whatever is in front of the panel and less of it out into the room. Three settings decide what comes out: both wavelengths together, red only, or near-infrared only. At 18 lbs the panel is light enough to move between the floor stand and the door hanger without help.\u003c\/p\u003e\n            \u003cul class=\"product-dive__list\"\u003e\n              \u003cli\u003e36 in. x 12 in. x 3 in., 18 lbs\u003c\/li\u003e\n              \u003cli\u003e300 LEDs at 660nm and 850nm\u003c\/li\u003e\n              \u003cli\u003e30 degree focusing lens on each LED\u003c\/li\u003e\n              \u003cli\u003eThree light settings: combined, red only, near-infrared only\u003c\/li\u003e\n              \u003cli\u003e56.9 mW\/cm2 at 6 in. at 100% brightness\u003c\/li\u003e\n            \u003c\/ul\u003e\n            \u003cdiv class=\"feature-badges\"\u003e\n              \u003cspan class=\"feature-badge\"\u003e300 LEDs\u003c\/span\u003e\n              \u003cspan class=\"feature-badge\"\u003e36 in. face\u003c\/span\u003e\n              \u003cspan class=\"feature-badge\"\u003e18 lbs\u003c\/span\u003e\n            \u003c\/div\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n\n        \u003cdiv class=\"product-dive product-dive--reverse\"\u003e\n          \u003cdiv class=\"product-dive__image\"\u003e\n            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0044\/9341\/0393\/files\/ReStore_Panel.png?v=1788214156\" alt=\"BioLight ReStore touchscreen control panel\" width=\"1500\" height=\"1500\" loading=\"lazy\"\u003e\n          \u003c\/div\u003e\n          \u003cdiv class=\"product-dive__body-wrap\"\u003e\n            \u003cspan class=\"product-dive__badge\"\u003eControls\u003c\/span\u003e\n            \u003ch3 class=\"product-dive__title\"\u003eFour Settings Behind One Screen\u003c\/h3\u003e\n            \u003cp class=\"product-dive__body\"\u003eBioLight took the physical buttons off this generation and put everything on a touchscreen: which of the three light settings runs, brightness anywhere from 1 to 100%, the pulse rate up to 10,000 Hz, and the timer. Brightness and pulse rate are independent, so a session can run bright and continuous, dim and continuous, or pulsed at any brightness. One note on BioLight's own numbers: they publish the pulsing floor two ways on the same page, as 0 Hz in the description text and 1 Hz in the specification block. The ceiling is 10,000 Hz in both places.\u003c\/p\u003e\n            \u003cul class=\"product-dive__list\"\u003e\n              \u003cli\u003eTouchscreen replaces the physical buttons\u003c\/li\u003e\n              \u003cli\u003eBrightness 1 to 100%, five published irradiance steps\u003c\/li\u003e\n              \u003cli\u003ePulse rate up to 10,000 Hz, or continuous\u003c\/li\u003e\n              \u003cli\u003eProgrammable timer, adjustable per session\u003c\/li\u003e\n              \u003cli\u003eLight flicker published at 1.2% modulation at 60Hz\u003c\/li\u003e\n            \u003c\/ul\u003e\n            \u003cdiv class=\"feature-badges\"\u003e\n              \u003cspan class=\"feature-badge\"\u003eTouchscreen\u003c\/span\u003e\n              \u003cspan class=\"feature-badge\"\u003e1-100% brightness\u003c\/span\u003e\n              \u003cspan class=\"feature-badge\"\u003eTo 10,000 Hz\u003c\/span\u003e\n            \u003c\/div\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n\n        \u003cdiv class=\"product-dive\"\u003e\n          \u003cdiv class=\"product-dive__image\"\u003e\n            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0044\/9341\/0393\/files\/0E2A0445.jpg?v=1788214157\" alt=\"BioLight ReStore panel on its wheeled floor stand\" width=\"1500\" height=\"1500\" loading=\"lazy\"\u003e\n          \u003c\/div\u003e\n          \u003cdiv class=\"product-dive__body-wrap\"\u003e\n            \u003cspan class=\"product-dive__badge\"\u003eMounting\u003c\/span\u003e\n            \u003ch3 class=\"product-dive__title\"\u003eA Stand and a Door Hanger, Both in the Box\u003c\/h3\u003e\n            \u003cp class=\"product-dive__body\"\u003eThe ReStore arrives with a floor stand on wheels and a door hanging kit, and you do not choose between them at purchase. The stand rolls the panel to wherever the session is happening and holds it upright; the door hanger puts it on the back of a door and gives the floor space back. BioLight publishes no wall mount for this model. The box also carries protective eyewear, the owner's manual and their Red Light Therapy Guide ebook, and the panel ships with a plug matched to the country on the shipping address.\u003c\/p\u003e\n            \u003cul class=\"product-dive__list\"\u003e\n              \u003cli\u003eFloor stand with wheels, included\u003c\/li\u003e\n              \u003cli\u003eDoor hanging kit, also included\u003c\/li\u003e\n              \u003cli\u003eProtective eyewear\u003c\/li\u003e\n              \u003cli\u003eOwner's manual and The Red Light Therapy Guide ebook\u003c\/li\u003e\n              \u003cli\u003ePower plug matched to the shipping country\u003c\/li\u003e\n            \u003c\/ul\u003e\n            \u003cdiv class=\"feature-badges\"\u003e\n              \u003cspan class=\"feature-badge\"\u003eStand included\u003c\/span\u003e\n              \u003cspan class=\"feature-badge\"\u003eDoor hanger included\u003c\/span\u003e\n              \u003cspan class=\"feature-badge\"\u003eEyewear included\u003c\/span\u003e\n            \u003c\/div\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"section--cream\"\u003e\n    \u003cdiv class=\"container\"\u003e\n      \u003cp class=\"section__eyebrow\"\u003eCompare\u003c\/p\u003e\n      \u003ch2 class=\"section__title\"\u003eFour BioLight Panels and Pods, Side by Side\u003c\/h2\u003e\n      \u003cp class=\"section__lead\"\u003eThe ReStore and the ReCharge are both quoted at 6 in., so their figures can be read against each other. The Cocoon is quoted at contact and the ReJuvenate carries two unreconciled values, so neither is set against the panels here.\u003c\/p\u003e\n      \u003cdiv class=\"compare__grid compare__grid--four\"\u003e\n\n        \u003cdiv class=\"compare-card compare-card--current\"\u003e\n          \u003cdiv class=\"compare-card__flag\"\u003eYou're Here\u003c\/div\u003e\n          \u003cdiv class=\"compare-card__image\"\u003e\n            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0044\/9341\/0393\/files\/2_402b6324-bcc8-4b8f-84ae-ee00bb37de56.jpg?v=1788214156\" alt=\"BioLight ReStore full-body panel\" width=\"800\" height=\"800\" loading=\"lazy\"\u003e\n          \u003c\/div\u003e\n          \u003cdiv class=\"compare-card__name\"\u003eBioLight ReStore\u003c\/div\u003e\n          \u003cdiv class=\"compare-card__desc\"\u003eA 36 in. by 12 in. full-body panel with 300 LEDs at 56.9 mW\/cm2 at 6 in., shipping with both a floor stand and a door hanger.\u003c\/div\u003e\n          \u003cdiv class=\"compare-card__feats\"\u003e\n            \u003cspan class=\"compare-card__feat\"\u003e300 LEDs\u003c\/span\u003e\n            \u003cspan class=\"compare-card__feat\"\u003e56.9 mW\/cm2 at 6 in.\u003c\/span\u003e\n            \u003cspan class=\"compare-card__feat\"\u003eStand and door hanger\u003c\/span\u003e\n            \u003cspan class=\"compare-card__feat\"\u003e476W power draw\u003c\/span\u003e\n          \u003c\/div\u003e\n          \u003cspan class=\"compare-card__cta compare-card__cta--current\"\u003eCurrently viewing\u003c\/span\u003e\n        \u003c\/div\u003e\n\n        \u003cdiv class=\"compare-card\"\u003e\n          \u003cdiv class=\"compare-card__image\"\u003e\n            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0044\/9341\/0393\/files\/3_7f1d1f10-44f4-435f-b8e0-e0f72e78c783.jpg?v=1788214156\" alt=\"BioLight ReJuvenate whole body panel\" width=\"800\" height=\"800\" loading=\"lazy\"\u003e\n          \u003c\/div\u003e\n          \u003cdiv class=\"compare-card__name\"\u003eBioLight ReJuvenate\u003c\/div\u003e\n          \u003cdiv class=\"compare-card__desc\"\u003eBioLight's largest panel at 66 in. by 23 in., carrying 1008 LEDs, 20 cooling fans and a 3000W power draw.\u003c\/div\u003e\n          \u003cdiv class=\"compare-card__feats\"\u003e\n            \u003cspan class=\"compare-card__feat\"\u003e1008 LEDs\u003c\/span\u003e\n            \u003cspan class=\"compare-card__feat\"\u003e66 in. tall panel\u003c\/span\u003e\n            \u003cspan class=\"compare-card__feat\"\u003e20 cooling fans\u003c\/span\u003e\n            \u003cspan class=\"compare-card__feat\"\u003e3000W power draw\u003c\/span\u003e\n          \u003c\/div\u003e\n          \u003ca class=\"compare-card__cta\" href=\"\/products\/rejuvenate-whole-body-panel-for-med-spa-wellness-center-medical-clinic-adjustable-brightness-pulsed-frequencies\"\u003eShop the BioLight ReJuvenate\u003c\/a\u003e\n        \u003c\/div\u003e\n\n        \u003cdiv class=\"compare-card\"\u003e\n          \u003cdiv class=\"compare-card__image\"\u003e\n            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0044\/9341\/0393\/files\/cocoon.jpg?v=1788214156\" alt=\"BioLight Cocoon red light therapy pod\" width=\"800\" height=\"800\" loading=\"lazy\"\u003e\n          \u003c\/div\u003e\n          \u003cdiv class=\"compare-card__name\"\u003eBioLight Cocoon\u003c\/div\u003e\n          \u003cdiv class=\"compare-card__desc\"\u003eA zip-around pod holding 3600 LEDs that opens flat into a 69 in. by 71 in. mat and weighs 17.4 lbs.\u003c\/div\u003e\n          \u003cdiv class=\"compare-card__feats\"\u003e\n            \u003cspan class=\"compare-card__feat\"\u003e3600 LEDs\u003c\/span\u003e\n            \u003cspan class=\"compare-card__feat\"\u003e360 degree enclosure\u003c\/span\u003e\n            \u003cspan class=\"compare-card__feat\"\u003e5 intensity levels\u003c\/span\u003e\n            \u003cspan class=\"compare-card__feat\"\u003e17.4 lbs\u003c\/span\u003e\n          \u003c\/div\u003e\n          \u003ca class=\"compare-card__cta\" href=\"\/products\/cocoon-360-degree-red-light-therapy-pod-with-flexible-design-for-home-wellness\"\u003eShop the BioLight Cocoon\u003c\/a\u003e\n        \u003c\/div\u003e\n\n        \u003cdiv class=\"compare-card\"\u003e\n          \u003cdiv class=\"compare-card__image\"\u003e\n            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0044\/9341\/0393\/files\/1_ff69539a-2b34-4210-b8c6-8663e281d7de.jpg?v=1788214156\" alt=\"BioLight ReCharge tabletop panel\" width=\"800\" height=\"800\" loading=\"lazy\"\u003e\n          \u003c\/div\u003e\n          \u003cdiv class=\"compare-card__name\"\u003eBioLight ReCharge\u003c\/div\u003e\n          \u003cdiv class=\"compare-card__desc\"\u003eThe tabletop of the group at 11.3 in. by 8.3 in. and 8 lbs, with 60 LEDs rated 63 mW\/cm2 at 6 in.\u003c\/div\u003e\n          \u003cdiv class=\"compare-card__feats\"\u003e\n            \u003cspan class=\"compare-card__feat\"\u003e60 LEDs\u003c\/span\u003e\n            \u003cspan class=\"compare-card__feat\"\u003e63 mW\/cm2 at 6 in.\u003c\/span\u003e\n            \u003cspan class=\"compare-card__feat\"\u003e8 lbs\u003c\/span\u003e\n            \u003cspan class=\"compare-card__feat\"\u003e136W power draw\u003c\/span\u003e\n          \u003c\/div\u003e\n          \u003ca class=\"compare-card__cta\" href=\"\/products\/recharge-red-light-therapy-panel-touch-screen-adjustable-brightness-pulsed-frequencies\"\u003eShop the BioLight ReCharge\u003c\/a\u003e\n        \u003c\/div\u003e\n\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"section\"\u003e\n    \u003cdiv class=\"container\"\u003e\n      \u003cp class=\"section__eyebrow\"\u003eQuestions\u003c\/p\u003e\n      \u003ch2 class=\"section__title\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n      \u003cdiv class=\"faq__list\"\u003e\n\n        \u003cdiv class=\"faq-item\"\u003e\n          \u003cbutton type=\"button\"\u003e\n            \u003cspan\u003eWhat pulse rates will the ReStore run?\u003c\/span\u003e\n            \u003cspan class=\"faq-icon\"\u003e+\u003c\/span\u003e\n          \u003c\/button\u003e\n          \u003cdiv class=\"faq-answer\"\u003e\n            \u003cdiv class=\"faq-answer__inner\"\u003eUp to \u003cstrong\u003e10,000 Hz\u003c\/strong\u003e. BioLight publishes the bottom of that range two different ways on the same page: the description text says \u003cstrong\u003e0 to 10,000 Hz\u003c\/strong\u003e and the specification block says \u003cstrong\u003e1 to 10,000 Hz\u003c\/strong\u003e. We have printed both figures because BioLight prints both, and we have asked them to confirm which is correct. The ceiling of 10,000 Hz is consistent everywhere on their page.\u003c\/div\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n\n        \u003cdiv class=\"faq-item\"\u003e\n          \u003cbutton type=\"button\"\u003e\n            \u003cspan\u003eWhat is its irradiance, and at what distance?\u003c\/span\u003e\n            \u003cspan class=\"faq-icon\"\u003e+\u003c\/span\u003e\n          \u003c\/button\u003e\n          \u003cdiv class=\"faq-answer\"\u003e\n            \u003cdiv class=\"faq-answer__inner\"\u003e\n\u003cstrong\u003e56.9 mW\/cm2 at 6 in.\u003c\/strong\u003e at 100% brightness. BioLight publishes the full ladder at that same 6 in.: 56.5 mW\/cm2 at 75%, 44 at 50%, 32 at 25% and 13 at 1%. No figure is published at any other distance, so 6 in. is the only measurement point for this panel.\u003c\/div\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n\n        \u003cdiv class=\"faq-item\"\u003e\n          \u003cbutton type=\"button\"\u003e\n            \u003cspan\u003eDoes a pulsed session deliver the same amount of light as a continuous one?\u003c\/span\u003e\n            \u003cspan class=\"faq-icon\"\u003e+\u003c\/span\u003e\n          \u003c\/button\u003e\n          \u003cdiv class=\"faq-answer\"\u003e\n            \u003cdiv class=\"faq-answer__inner\"\u003eNo. A pulsed emitter is dark for part of every cycle, so over the same number of minutes at the same brightness setting a pulsed session puts less total energy on the surface than a continuous one. BioLight publishes their irradiance ladder against brightness only, so the figures above describe continuous output. They publish no derating table for pulsed operation.\u003c\/div\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n\n        \u003cdiv class=\"faq-item\"\u003e\n          \u003cbutton type=\"button\"\u003e\n            \u003cspan\u003eWhich pulse frequency should I use?\u003c\/span\u003e\n            \u003cspan class=\"faq-icon\"\u003e+\u003c\/span\u003e\n          \u003c\/button\u003e\n          \u003cdiv class=\"faq-answer\"\u003e\n            \u003cdiv class=\"faq-answer__inner\"\u003eBioLight publishes \u003cstrong\u003eno recommended frequency and no preset modes\u003c\/strong\u003e for this panel, only the range. Their product page does attach an outcome claim to one particular frequency, with no author, journal, year or reference number behind it. We have left that passage off this page for exactly that reason, and we are not going to substitute a recommendation of our own.\u003c\/div\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n\n        \u003cdiv class=\"faq-item\"\u003e\n          \u003cbutton type=\"button\"\u003e\n            \u003cspan\u003eWhat wavelengths does it emit?\u003c\/span\u003e\n            \u003cspan class=\"faq-icon\"\u003e+\u003c\/span\u003e\n          \u003c\/button\u003e\n          \u003cdiv class=\"faq-answer\"\u003e\n            \u003cdiv class=\"faq-answer__inner\"\u003e\n\u003cstrong\u003e660nm red\u003c\/strong\u003e and \u003cstrong\u003e850nm near-infrared\u003c\/strong\u003e, across all 300 LEDs, with three settings: both together, red only, or near-infrared only. Near-infrared at 850nm sits past the visible band, so the near-infrared-only setting looks close to dark while it is running.\u003c\/div\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n\n        \u003cdiv class=\"faq-item\"\u003e\n          \u003cbutton type=\"button\"\u003e\n            \u003cspan\u003eWhat is BioLight's Dual LED technology?\u003c\/span\u003e\n            \u003cspan class=\"faq-icon\"\u003e+\u003c\/span\u003e\n          \u003c\/button\u003e\n          \u003cdiv class=\"faq-answer\"\u003e\n            \u003cdiv class=\"faq-answer__inner\"\u003eBioLight's own name for the emitter in this panel, which they describe as \u003cstrong\u003epatent-pending\u003c\/strong\u003e and as letting each individual LED produce both wavelengths. Two caveats, both about BioLight's page and neither about the hardware. The sentence they use to explain it on this product page contradicts itself; their clearer wording elsewhere describes each LED emitting red and near-infrared at the same time. And no patent number, application number or jurisdiction is published anywhere, so the patent-pending description is theirs, attributed to them, and not a claim we are making.\u003c\/div\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n\n        \u003cdiv class=\"faq-item\"\u003e\n          \u003cbutton type=\"button\"\u003e\n            \u003cspan\u003eHow do I mount it?\u003c\/span\u003e\n            \u003cspan class=\"faq-icon\"\u003e+\u003c\/span\u003e\n          \u003c\/button\u003e\n          \u003cdiv class=\"faq-answer\"\u003e\n            \u003cdiv class=\"faq-answer__inner\"\u003eTwo ways, and both parts are in the box: a \u003cstrong\u003efloor stand with wheels\u003c\/strong\u003e and a \u003cstrong\u003edoor hanging kit\u003c\/strong\u003e. No choice is made at purchase and no upgrade is charged for either. BioLight publishes no wall mount for this model. At 18 lbs the panel moves between the two without help.\u003c\/div\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n\n        \u003cdiv class=\"faq-item\"\u003e\n          \u003cbutton type=\"button\"\u003e\n            \u003cspan\u003eHow much power does it draw?\u003c\/span\u003e\n            \u003cspan class=\"faq-icon\"\u003e+\u003c\/span\u003e\n          \u003c\/button\u003e\n          \u003cdiv class=\"faq-answer\"\u003e\n            \u003cdiv class=\"faq-answer__inner\"\u003e\n\u003cstrong\u003e476W\u003c\/strong\u003e on \u003cstrong\u003e100-240VAC at 50\/60Hz\u003c\/strong\u003e, which BioLight states covers both US and Canadian supply and international supply. Eight cooling fans move the heat off the array. LED lifespan is published at 100,000 hours.\u003c\/div\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n\n        \u003cdiv class=\"faq-item\"\u003e\n          \u003cbutton type=\"button\"\u003e\n            \u003cspan\u003eWhat does BioLight publish for flicker and EMF?\u003c\/span\u003e\n            \u003cspan class=\"faq-icon\"\u003e+\u003c\/span\u003e\n          \u003c\/button\u003e\n          \u003cdiv class=\"faq-answer\"\u003e\n            \u003cdiv class=\"faq-answer__inner\"\u003eLight flicker is given as \u003cstrong\u003e1.2% modulation at 60Hz\u003c\/strong\u003e. EMF emission is given as standard magnetic 0.3 mG, standard electric 30 V\/m, weighted magnetic 0.3 mG, weighted electric 24 V\/m and RF 0.15 mW\/m2. BioLight publishes no measurement distance, laboratory name or report number alongside those EMF readings.\u003c\/div\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n\n        \u003cdiv class=\"faq-item\"\u003e\n          \u003cbutton type=\"button\"\u003e\n            \u003cspan\u003eHow long is a session, and how often?\u003c\/span\u003e\n            \u003cspan class=\"faq-icon\"\u003e+\u003c\/span\u003e\n          \u003c\/button\u003e\n          \u003cdiv class=\"faq-answer\"\u003e\n            \u003cdiv class=\"faq-answer__inner\"\u003eBioLight states \u003cstrong\u003e10 to 20 minutes per area\u003c\/strong\u003e, used \u003cstrong\u003e3 to 5 times per week\u003c\/strong\u003e, or daily during more intensive periods. That is BioLight's guidance, not ours. The programmable timer runs the clock so the panel shuts itself off.\u003c\/div\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n\n        \u003cdiv class=\"faq-item\"\u003e\n          \u003cbutton type=\"button\"\u003e\n            \u003cspan\u003eWhat ships in the box?\u003c\/span\u003e\n            \u003cspan class=\"faq-icon\"\u003e+\u003c\/span\u003e\n          \u003c\/button\u003e\n          \u003cdiv class=\"faq-answer\"\u003e\n            \u003cdiv class=\"faq-answer__inner\"\u003eThe \u003cstrong\u003eReStore panel\u003c\/strong\u003e with a power plug matched to your shipping country, the \u003cstrong\u003edoor hanging kit\u003c\/strong\u003e, the \u003cstrong\u003efloor stand\u003c\/strong\u003e, \u003cstrong\u003eprotective eyewear\u003c\/strong\u003e, the \u003cstrong\u003eowner's manual\u003c\/strong\u003e and BioLight's \u003cstrong\u003eRed Light Therapy Guide ebook\u003c\/strong\u003e.\u003c\/div\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n\n        \u003cdiv class=\"faq-item\"\u003e\n          \u003cbutton type=\"button\"\u003e\n            \u003cspan\u003eWhat is the warranty, and how long is delivery?\u003c\/span\u003e\n            \u003cspan class=\"faq-icon\"\u003e+\u003c\/span\u003e\n          \u003c\/button\u003e\n          \u003cdiv class=\"faq-answer\"\u003e\n            \u003cdiv class=\"faq-answer__inner\"\u003eBioLight publishes a \u003cstrong\u003e3 year warranty\u003c\/strong\u003e, a \u003cstrong\u003e60 day return period\u003c\/strong\u003e and a \u003cstrong\u003e100,000 hour LED lifespan\u003c\/strong\u003e. Orders ship direct from BioLight's manufacturer and they ask buyers to allow roughly \u003cstrong\u003e3 to 4 weeks\u003c\/strong\u003e for delivery.\u003c\/div\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n\n      \u003c\/div\u003e\n      \u003cp\u003eThe statements on this website have not been evaluated by the FDA (U.S. Food \u0026amp; Drug Administration). Our products are not intended to diagnose, treat, cure, or prevent any disease.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n\u003c\/div\u003e","brand":"BioLight","offers":[{"title":"Default Title","offer_id":49251143418107,"sku":"RESTORE","price":1799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0044\/9341\/0393\/files\/2_402b6324-bcc8-4b8f-84ae-ee00bb37de56.jpg?v=1788214156","url":"https:\/\/www.recoveryforathletes.com\/products\/restore-full-body-red-light-therapy-panel-touch-screen-adjustable-brightness-pulsed-frequencies","provider":"Recovery For Athletes","version":"1.0","type":"link"}