Skip to content

HEALiX Elevate Light Pod

Original price $1,599.99 - Original price $1,599.99
Original price
$1,599.99
$1,599.99 - $1,599.99
Current price $1,599.99

✓ Authorized HEALiX Infrared Dealer
✓ Lowest Price Guaranteed
FREE & FAST Shipping: In Stock and Ready to Ship
✓ Questions? Call an RFA Team Member: 1-855-864-6442

Full-Body Red & Near-Infrared

HEALiX Elevate Light Pod

The Elevate emits 660nm red and 850nm near-infrared light at a 1:1 near-infrared to red ratio, adjustable up to a maximum of 149 mW/cm² at the surface. Those two numbers are what separate this pod from the HEALiX Glow Pod already on our shelf, which runs 4:1 red to near-infrared and adjusts up to 101 mW/cm².

The light comes from 2,680 bulbs carrying four chips each, 10,720 LED chips in total. The pod measures 71" × 32" × 12", weighs 25 lbs, and folds down when you are finished. It lies flat on a bed, a sofa or the floor, and both ends stay open. HEALiX sets a session at 20 to 25 minutes on the programmable timer.

Wavelengths
660 & 850nm
Red and near-infrared
Light Ratio
1:1
Near-infrared to red
Irradiance
149 mW/cm²
Maximum at surface, adjustable
LED Chips
10,720
2,680 bulbs, 4 chips each
2-Year Warranty 45-Day Money-Back Guarantee Free 2–4 Day Shipping HSA/FSA Eligible
HEALiX Elevate Light Pod

The Hardware

What the Pod Actually Emits

Every figure below is HEALiX's published specification for the Elevate. We have printed the mechanism and left the outcomes to them.

🔴
1:1 near-infrared to red
Equal parts 850nm near-infrared and 660nm red. HEALiX's stated reason for the even split is deeper full-body work, and they point the 4:1 Glow Pod at skin and everyday recovery.
660nm + 850nm
💡
10,720 LED chips
2,680 bulbs across the panel, four chips inside each bulb. Peak irradiance at the surface is 149 mW/cm², and the controller takes it down from there.
149 mW/cm² max
🎛️
Digital controller
Intensity is adjustable, strobe frequency is modifiable, and the timer is programmable. HEALiX built the interface to be read at a glance while you are lying inside the pod.
Programmable timer
🛡️
Liner and certifications
Medical-grade non-toxic TPU liner, free of BPA, BPS and BPF. HEALiX measures EMF exposure at the surface at 0 microtesla. The pod carries REACH, RoHS, CE and FCC certification.
0 microtesla at surface

Why Athletes Choose This

What Owning the Elevate Involves

HEALiX's own material attaches therapeutic outcomes to red and near-infrared light. Recovery For Athletes makes no such claim. What follows is the pod as a piece of equipment: its size, its settings, its materials and its terms.

📏
71 inches of panel, head to feet
71" × 32" × 12"
🔓
Open at both ends
Open-ended design
🛏️
Lies flat on a bed, sofa or floor
No frame to build
📦
Collapses for storage at 25 lbs
Folds down
⏱️
20 to 25 minute sessions
Timer on the controller
🎚️
Intensity you set yourself
Up to 149 mW/cm²
🧼
TPU liner wipes clean
BPA, BPS & BPF free
Certified to four standards
REACH · RoHS · CE · FCC

A Closer Look

Three Things Worth Knowing Before You Buy

HEALiX Elevate Light Pod
Controls

Three settings, one interface

The digital controller handles intensity, strobe frequency and session length. Peak output is 149 mW/cm² at the surface and every step below that is available, so you can start low and work up over your first few weeks with the pod.

  • Adjustable intensity to a 149 mW/cm² maximum
  • Modifiable strobe frequency
  • Programmable timer for 20 to 25 minute sessions
  • Interface sized to read at a glance
Adjustable intensity Strobe frequency Programmable timer
HEALiX Elevate Light Pod
Light Engine

10,720 chips at a 1:1 ratio

2,680 bulbs line the pod, four chips to a bulb. Half the output is 660nm red and half is 850nm near-infrared, which is the 1:1 near-infrared to red ratio in HEALiX's specification. The 24V system draws 350W at full power.

  • 2,680 bulbs, 4 chips per bulb, 10,720 chips total
  • 660nm red and 850nm near-infrared in equal measure
  • 149 mW/cm² maximum irradiance at the surface
  • 24V, 350W
  • 0 microtesla EMF exposure at the surface, per HEALiX
1:1 NIR to red 10,720 LED chips 24V / 350W
HEALiX Elevate Light Pod
Build & Setup

Unfold it, plug it in, lie down

The pod is cushioned and padded inside a medical-grade non-toxic TPU liner that is free of BPA, BPS and BPF. Setup is unfolding it on a flat surface, powering it on and choosing your settings. Both ends stay open, so your head and feet are never enclosed.

  • 71" × 32" × 12" unfolded, 25 lbs
  • Open-ended collapsible construction, cushioned and padded
  • Medical-grade non-toxic TPU liner, BPA, BPS and BPF free
  • Wipe clean with a soft cloth
  • Store folded in a cool, dry place
25 lbs Collapsible Wipe clean

Glow Pod or Elevate

Two HEALiX Pods, Two Different Ratios

Both pods emit 660nm red and 850nm near-infrared and both fold flat. The split between the two wavelengths and the irradiance ceiling are where they part company, and that is the choice in front of you.

HEALiX Glow Pod
HEALiX Glow Pod
The lighter of the two pods. HEALiX weights it 4:1 toward red and aims it at skin and everyday recovery.
4:1 red to near-infrared Adjustable to 101 mW/cm² 660nm and 850nm Folds flat
Shop the Glow Pod
You're Here
HEALiX Elevate Light Pod
HEALiX Elevate Light Pod
The higher-output pod. Equal red and near-infrared, with a ceiling 48 mW/cm² above the Glow.
1:1 near-infrared to red Adjustable to 149 mW/cm² 10,720 LED chips 71" × 32" × 12", 25 lbs
Currently viewing

Questions

Frequently Asked Questions

Two: 660nm red and 850nm near-infrared, in a 1:1 near-infrared to red ratio. Both run together across the full length of the pod.
Ratio and output. The Glow Pod runs 4:1 red to near-infrared and adjusts up to 101 mW/cm²; the Elevate runs 1:1 and adjusts up to 149 mW/cm². HEALiX aims the Glow at skin and everyday recovery and the Elevate at deeper full-body sessions. If you want the higher irradiance ceiling and an even split between the two wavelengths, the Elevate is the one.
Maximum irradiance is 149 mW/cm² at the surface and intensity is adjustable, so you can run well below the ceiling. Beginning at a lower setting and raising it as you get used to the pod is a sensible approach.
HEALiX puts a session at 20 to 25 minutes. The controller has a programmable timer, so you set it once and let it run.
HEALiX's guidance on frequency varies between their own documents, so we are not going to publish a number for it. Session length is consistent across their material at 20 to 25 minutes. Follow the instructions that ship in the box, and raise frequency with your doctor if you are building a regular routine.
2,680 bulbs with four chips in each, for 10,720 LED chips total. HEALiX's Shopify copy elsewhere prints a lower chip figure; the 2,680 × 4 arithmetic in their specification table is the one that holds together, so it is the one on this page.
HEALiX lists EMF exposure at the surface as 0 microtesla. That is their measurement, published in their specification for the pod.
A medical-grade non-toxic TPU liner over cushioned padding, free of BPA, BPS and BPF. The pod is certified to REACH, RoHS, CE and FCC.
Unfolded it is 71" × 32" × 12" and it weighs 25 lbs. It lies flat on a bed, a sofa or the floor, and it collapses for storage between sessions.
No. The design is open-ended, so your head and your feet stay outside the pod while you use it.
24V, 350W. It runs from a standard household outlet through the supplied power supply.
Wipe the liner with a soft cloth, then fold the pod and store it in a cool, dry place.
Yes. Speak with your physician before you start using the Elevate, particularly if you are pregnant, taking photosensitising medication, being treated for any medical condition, or using the pod with a child. Recovery For Athletes sells the Elevate as recovery equipment and makes no medical claim for it. It does not diagnose, treat, cure or prevent anything.
HEALiX cites published research on red and near-infrared photobiomodulation on their own Elevate page. We have not summarised those papers here, and none of them studied this pod. Read them yourself if you want the detail. They are background on the field, and nothing more than that.
The Elevate carries a 2-year warranty and a 45-day money-back satisfaction guarantee. Use it for six weeks; if it is the wrong pod for you, send it back.
Free 2–4 day shipping to the lower 48, and the Elevate is HSA/FSA eligible. Check with your plan administrator before you order, since eligibility rules differ between plans.
  • Size: 71” x 32” x 12”
  • Weight: 25 lbs
  • Power:24V | 350W
  • Irradiance: Maximum 149 mW/cm² at surface
  • LED Bulbs: 2,680 bulbs (10720 LED chips, 4 per bulb)
  • EMF Exposure: 0 microtesla at surface
  • Red Light Wavelength: 660nm
  • Near-Infrared Wavelength: 850nm
  • Light Ratio: 1:1 Near-Infrared to Red Light (for deeper tissue penetration)
  • Material: Medical-grade, non-toxic TPU liner – BPA, BPS & BPF free
  • Certifications: REACH, RoHS, CE & FCC Certified for safety
  • Usage: Suitable for full-body sessions, targeting muscles, joints, and connective tissue
  • Maintenance: Wipe clean with a soft cloth after use; store folded in a cool, dry place
  • Industry leading Power in light pods, with a 149 mW/cm2 irradiance
  • 2:2 Red Light to Near Infrared Ratio for balanced Red Light + NIR benefits
  • First of kind LED 4 diode chips provide more balanced, efficient light delivery
  • Penetrates deeper to relieve stubborn aches and joint pain
  • Advanced design provides superior recovery, inflammation & skin benefits