Skip to content

Human Touch Perfect Chair PC-365 Classic Power Recliner

Original price $2,799.00 - Original price $2,799.00
Original price
$2,799.00
$2,799.00 - $2,799.00
Current price $2,799.00

✓ Authorized Human Touch Dealer
✓ Lowest Price Guaranteed
FREE & FAST Shipping: In Stock and Ready to Ship
✓ Questions? Call an RFA Team Member: 1-855-864-6442

Human Touch | Perfect Chair PC-365

Human Touch Perfect Chair PC-365 Classic Power Recliner

The PC-365 is the only Perfect Chair Human Touch sells as a single part number with the pad set already attached to it. One base finish, Dark Walnut. One pad set, Espresso SofHyde. There is no package to pick and no upholstery matrix to work through, which is the whole argument for this chair over the two above it. A powered recline system carries the chair into the zero gravity position from a control on the chair itself, and the maximum load weight is 400 lb, the same rating Human Touch publishes on the PC-610 and the PC-420. Human Touch publishes no height range for any Perfect Chair, so that 400 lb figure is the only user limit on the sheet.

The base is hand-carved solid wood with high-tensile-strength steel carrying the recline, the upholstery is SofHyde, and a full support head pillow sits on an articulating headrest. The chair weighs 80 lb, the seat measures 23 in. across, the upright footprint is 46 in. L x 32 in. W x 46 in. H, and reclined it runs to 64 in. L x 32 in. W x 42 in. H. It needs 12 in. of clearance behind it, which is more wall space than either of the other two Perfect Chairs. One thing separates it sharply from its siblings and it is the warranty: Human Touch covers the PC-365 for 3 years structural, 2 years parts and 1 year labor, where the PC-610 and PC-420 both carry seven years on all three.

Maximum Load Weight
400 lb
Human Touch spec table
Rear Clearance
12 in.
Space needed to recline
Seat Width
23 in.
Only seat figure published
Chair Weight
80 lb
Lightest of the three
Power recline One fixed finish Pad set included 400 lb capacity
Human Touch Perfect Chair PC-365 Classic Power Recliner reclined in a living room on its dark walnut base

Inside the chair

Four Published Parts of the PC-365

Human Touch lists four features on this chair and writes no sentence under any of them. Here is what each one is, held to what the spec sheet actually says.

Powered Recline, One Part Number
The recline is motor-driven, so the chair carries you back and brings the legs up on a control. Human Touch publishes no recline angle in degrees and no count of preset zero gravity positions on this chair or on any recliner it makes, so the mechanism is the specification and the stopping point is wherever you release the control. What is unusual here is the ordering: this is the one Perfect Chair where the pad set arrives fixed to a single base finish, so the chair you configure is the chair you get.
Dark Walnut with Espresso SofHyde
🌲
Solid Wood Base, Steel Recline
Human Touch words this one precisely: a hand-carved solid wood base, with high-tensile-strength steel for the recline. Two materials doing two jobs. The wood is the visible structure that sets the chair on the floor and holds the finish; the steel is inside the motion, taking the load through the arc every time the chair goes back. Human Touch publishes no wood species and no steel grade, and we are not going to name either one for them.
Wood plus steel
🪑
SofHyde Upholstery in Espresso
SofHyde is Human Touch's own upholstery material and it appears across the range, from the massage chairs to the Comfort package on the two Perfect Chairs above this one. Human Touch publishes no composition, no thickness and no abrasion figure for it. How SofHyde and leather sit against each other across this group, and how little Human Touch publishes about either, is set out on the Vesta ZG page. On the PC-365 there is one option and it is Espresso.
One colorway
💤
Head Pillow on an Articulating Headrest
The headrest articulates, meaning its angle moves separately from the backrest, and a full support head pillow sits on it. In a reclined chair the head is the part that wants a different angle from the torso, and a fixed headrest pushes the chin toward the chest once the back goes past a certain point. Human Touch publishes no adjustment range for the articulation and no pillow dimensions.
Angle moves separately

The numbers

Eight Figures From the PC-365 Spec Table

Every figure here is published by Human Touch for the PC-365 specifically. The one deliberate blank is the height range, and it is blank because Human Touch publishes none.

🏋
400 lb maximum load weight
Human Touch spec table
📏
Height range not published
True of all three Perfect Chairs
📑
3 years structural, 2 parts, 1 labor
Human Touch warranty schedule
📍
12 in. rear clearance
Most of the three Perfect Chairs
💰
Seat width 23 in.
No depth or height published
Chair weight 80 lb
One fixed configuration
🏠
Upright 46 in. L x 32 in. W x 46 in. H
Footprint sitting up
🛏
Reclined 64 in. L x 32 in. W x 42 in. H
Footprint laid back

Zero gravity

What Zero Gravity Recline Actually Is

Six chairs on this site are sold as zero gravity recliners, and the phrase does a lot of work with very little published behind it. Here is the geometry, which is the part that can be stated plainly.

Side profile of the Human Touch Perfect Chair PC-365 reclined fully flat on its walnut base
Flat recline

The Back Goes Down as the Legs Come Up

Side on and fully flat is the shape the whole chair is built around. The seat pan and the backrest travel together through one arc on the wood base, so the back cannot go down without the legs coming up, and there is no separate footrest to deploy. That is why the reclined length runs to 64 in. against an upright 46 in. A motor drives the arc while you hold the control, and Human Touch publishes no recline angle in degrees and no count of preset zero gravity positions, so the chair stops where you stop it.

  • Reclined 64 in. L x 32 in. W x 42 in. H
  • Upright 46 in. L x 32 in. W x 46 in. H
  • Powered recline system worked from a control on the chair
  • No recline angle in degrees and no position count published
  • Maximum load weight 400 lb, the same rating as the PC-610 and PC-420
Power recline 64 in. reclined 400 lb rated
Close-up of the head pillow and armrest upholstery on the Human Touch Perfect Chair PC-365
Pad set and pillow

Espresso SofHyde on an Articulating Headrest

This is the surface you actually meet: an Espresso SofHyde pad set with a full support head pillow sitting on an articulating headrest. The headrest angle moves separately from the backrest, which matters once the back is past a certain point and a fixed headrest starts pushing the chin toward the chest. What the reclined shape does is spread your weight across the whole back surface while the legs are carried above the seat, with no one point of contact taking a disproportionate share. Human Touch publishes no composition, no thickness and no abrasion figure for SofHyde.

  • SofHyde upholstery in Espresso, the only pad set offered
  • Full support head pillow on an articulating headrest
  • Headrest angle adjusts separately from the backrest
  • No composition, thickness or abrasion rating published for SofHyde
  • Pad set arrives attached to the Dark Walnut base as one part number
Espresso SofHyde Articulating headrest One part number
Human Touch Perfect Chair PC-365 Classic Power Recliner placed in a living room
Room planning

Twelve Inches Off the Wall Before Anything Else

Dropped into a living room, the chair asks for two measurements. It needs 12 in. of clearance behind it to complete the recline, which is the largest figure of the three Perfect Chairs, and it wants floor for a 64 in. reclined length. Everything else about placing it is settled at the factory: one base finish in Dark Walnut, one pad set, 80 lb on the floor and no upholstery matrix to work through. Measure the wall first, because rear clearance is the number that moves most across this category.

  • Rear clearance 12 in., the most of the three Perfect Chairs
  • The PC-610 and the PC-420 need 9 in.
  • The Gravis ZG needs 3 in. and the Laevo ZG needs 21 in.
  • Chair weight 80 lb in one fixed Dark Walnut finish
  • Upright 46 in. L x 32 in. W x 46 in. H
12 in. clearance 80 lb chair Single configuration

Compare

Three Perfect Chairs, One Decision

The three Perfect Chairs share a 400 lb rating and the same absent height range. What moves between them is the recline mechanism, the amount of finish choice, and the warranty term.

You're Here
Perfect Chair PC-365 Classic Power
The only Perfect Chair sold as one part number with its pad set included, in a single Dark Walnut and Espresso combination.
Power recline One fixed finish 400 lb capacity 3-year structural
Currently viewing
Perfect Chair PC-610 Omni-Motion Classic
Power recline across three base finishes and three upholstery packages, and the longest labor coverage Human Touch publishes on anything.
Power recline 3 bases, 3 packages 400 lb capacity 7-year labor
Shop the PC-610
Perfect Chair PC-420 Classic Manual Plus
The manual-recline Perfect Chair, with the same three finishes, three packages and 7-year labor coverage as the powered PC-610.
Manual recline 3 bases, 3 packages 400 lb capacity 7-year labor
Shop the PC-420

Questions

Frequently Asked Questions

Three differences, and one of them is bigger than buyers expect. First, configuration: the PC-365 is one part number in Dark Walnut with an Espresso SofHyde pad set, while the other two offer three base finishes crossed with three upholstery packages. Second, warranty: the PC-365 is covered for 3 years structural, 2 years parts and 1 year labor, where the PC-610 and PC-420 are both 7 years on all three. Third, clearance: this chair needs 12 in. behind it against 9 in. for the other two. All three carry the same 400 lb maximum load weight.
Human Touch publishes no height range for the PC-365, and none for the PC-610 or PC-420 either. Height range is published only on the massage chairs and on the three ZG chairs, where it runs from 5 ft 0 in. Borrowing a figure from a chair with a different frame would be a guess, so we leave this blank and tell you it is blank. The published seat width is 23 in. and the reclined length is 64 in., which are the two dimensions closest to a fit answer. If a specific user height is the deciding factor, ask us and we will put the question to Human Touch in writing before you order.
It is the figure in Human Touch's own spec table for this chair, and it is the highest maximum load weight Human Touch publishes on anything in this range. It belongs to the PC-365, the PC-610 and the PC-420. It does not belong to the ZG chairs: the Laevo ZG and the Vesta ZG are both rated 285 lb. If you are shopping across the two families, read the rating off the page of the chair you are actually buying.
One combination: a Dark Walnut base with an Espresso SofHyde pad set. Human Touch's own storefront shows two selectors on this product, one for the base and one for the pad set, and each has exactly one value, which is a fair description of what is on offer. If you want a base or pad color choice on a Perfect Chair, that is the PC-610 and the PC-420.
A motor drives the chair through its recline arc while you hold a control, so the backrest going down and the legs coming up happen together under power. You do not push against the chair and you do not need to shift your weight to start the motion. Human Touch publishes no motor specification, no voltage and no wattage for this chair, and no count of preset positions, so the chair stops where you stop holding the control. The manual alternative works differently and the PC-420 page sets out that comparison in full.
Upright it occupies 46 in. L x 32 in. W x 46 in. H. Reclined it occupies 64 in. L x 32 in. W x 42 in. H, and it needs 12 in. of clearance behind it to get there. Plan the floor against the 64 in. reclined length and hold the 12 in. off the wall, because that clearance figure is the largest of the three Perfect Chairs.
Human Touch's own upholstery material, named on the spec sheet as SofHyde and used across the massage chairs and the Comfort package of the other two Perfect Chairs. Human Touch publishes no composition, no thickness and no abrasion rating for it, so we describe it as their material and stop there. The Vesta ZG page covers how SofHyde and leather sit against each other across this group.
Human Touch publishes three separate terms for the PC-365: 3 years structural, 2 years parts, 1 year labor. The headline "3-Year Limited Warranty" on the product page refers to the structural term alone. This is the point most worth reading twice on this page, because being a Perfect Chair does not carry the 7-year term: Human Touch's own warranty schedule puts the PC-610, PC-420 and PC-600 in the 7-year band and the PC-365 in the 3-year band. Exclusions Human Touch names include normal wear such as foam softening and fabric wear, damage from animals or pests, and damage from power surges.
Yes. The PC-365 is one of four chairs named on the zero gravity recliner protection plans, alongside the Gravis, Laevo and Vesta, and both a 5-year and a 3-year term are available. Both extend parts and in-home service for consumer use and both are end-user coverage with no commercial use. Given that the factory labor term here is one year, this is the chair in the Perfect Chair family where a plan changes the most.
Human Touch publishes no carton dimensions and no boxed weight for the PC-365, and no packing list, so we cannot tell you the box count. What is published is the delivery: free To Your Door shipping to the 48 contiguous states, scheduled by phone, chair placed at the front door, first floor only. A White Glove upgrade adds first-floor delivery, assembly in the room of your choice and removal of all packaging. Inspect and document any shipping damage at the door: Human Touch states in writing that shipping damage is not a warranty defect and must be reported at the time of delivery.
Human Touch publishes no certification statement on the PC-365 page, so we assert none. No UL, ETL, CSA, FDA, CE or FCC mark appears anywhere on their product page for this chair. If certification documentation is a condition of your purchase, ask us and we will request it from Human Touch in writing before you order.
No maximum user height, no voltage or wattage, no motor specification, no recline angle in degrees, no count of zero gravity positions, no seat depth or seat height, no carton dimensions or boxed weight, and no wood species or steel grade behind the hand-carved base description. Human Touch also runs a set of percentage statistics across its Perfect Chair collection pages with no source, sample or date attached to any of them, and we do not reproduce those figures here or anywhere else on this site.
  • Upright Dimensions: 46 in. L x 32 in. W x 46 in. H
  • Reclined Dimensions: 64 in. L x 32 in. W x 42 in. H
  • Seat Width: 23 in.
  • Product Weight: 80 lb
  • Maximum Load Weight: 400 lb
  • Height Range: Not published by Human Touch
  • Clearance, Rear: 12 in.
  • Recline Mechanism: Power
  • Base: Hand-carved solid wood with high-tensile-strength steel
  • Upholstery: SofHyde
  • Base Finish: Dark Walnut
  • Pad Set Color: Espresso SofHyde
  • Warranty, Structural: 3 years
  • Warranty, Parts: 2 years
  • Warranty, Labor: 1 year
  • Power recline: a motor carries the chair into the zero gravity position on a control
  • One part number: the only Perfect Chair sold with its pad set already included
  • Dark Walnut base: the single base finish offered on this model
  • Espresso SofHyde pad set: the single pad set colorway offered on this model
  • Hand-carved solid wood base: with high-tensile-strength steel carrying the recline
  • Full support head pillow: on an articulating headrest that angles separately from the backrest
  • Maximum load weight: 400 lb, the same rating as the PC-610 and PC-420
  • Height range: not published by Human Touch on any Perfect Chair
  • Seat width: 23 in., the only seat figure Human Touch publishes for this chair
  • Rear clearance: 12 in., the most of the three Perfect Chairs
  • Chair weight: 80 lb, the lightest Perfect Chair
  • Reclined footprint: 64 in. L x 32 in. W x 42 in. H
  • Warranty: 3 years structural, 2 years parts, 1 year labor
  • Protection plan: named on both the 3-year and 5-year zero gravity recliner plans
  • Delivery: free To Your Door delivery, front door and first floor only
  • White Glove option: first-floor delivery, assembly in your room and packaging removal