Skip to content

Osaki OS-Champ Massage Chair

by Osaki
Original price $2,499.00 - Original price $2,499.00
Original price
$2,499.00
$2,499.00 - $2,499.00
Current price $2,499.00

✓ Authorized Osaki Dealer
✓ Lowest Price Guaranteed
✓ FREE & FAST Shipping: In Stock and Ready to Ship
✓ Questions? Call an RFA Team Member: 1-855-864-6442

Osaki | OS-Champ

Osaki OS-Champ Massage Chair

The Osaki OS-Champ is a 2D massage chair on an L-Track, so one stroke runs from your neck through the lower back and on under the seat, across your glutes and hamstrings. A 2D mechanism moves the rollers up, down and side to side at a fixed depth. Spot and partial modes park the rollers on one area and hold them there when it needs the attention. Eighteen airbags at the shoulders, arms, calves and feet cover what the rollers cannot reach. The full body air program adds the palms, lower back, buttocks and thighs.

Four of the five auto programs run 15 minutes and the Demo runs 5, with five massage styles underneath them and a timer you can set from 5 to 30 minutes. Two heating pads sit at the lumbar. Reflexology is the pressing of specific points on the sole of the foot, and two spinning reflexology rollers turn under your feet to reach them. An ankle grip holds each foot in place, and the footrest extends up to 7.6 in. Zero gravity is the recline that lifts your knees above your heart, so your spine stops carrying your weight, and the OS-Champ stops at two stages of it. Space saving technology pulls the base forward as the backrest drops, so the chair recovers 9 in. it would otherwise take out of the room behind it. The chair weighs 203 lb net, takes a user up to 260 lb, and comes in three two-tone colorways.

Airbags
18
Shoulders, arms, calves, feet
Space recovered
9 in.
Room given back as the base slides forward
Reclined length
78.0 in.
57.1 in. upright
User weight
260 lb
Chair weighs 203 lb net
2D rollers on an L-track 2 stages of zero gravity Ankle grip in each footwell 29.5 in. minimum doorway
Osaki OS-Champ L-track massage chair, three quarter view

Inside the chair

How it works

An S-track chair stops the rollers at the lower back and leaves the seat to airbags, while the OS-Champ's full L-Track keeps roller contact going all the way to the hamstrings.

L-Track Past the Lower Back
The rollers on the OS-Champ start at your neck and follow your spine down to the lower back. At that point the track turns forward under the seat and keeps travelling out across your glutes and the tops of your hamstrings. An S-track massage chair finishes at the tailbone and covers the seat with airbags alone, so the L shape is the specification that decides whether a single pass reaches the top of your legs. On the OS-Champ the whole path runs in one continuous stroke, with no second program to start and no shifting position halfway through.
Neck to hamstrings
Eighteen Airbags in Four Places
Eighteen airbags sit around the frame, grouped at the shoulders, the arms, the calves and the feet. The roller track is the rail the rollers ride, and the airbags handle everything it has no path to. The full body air program takes them through the shoulders, arms, palms, lower back, buttocks, thighs, calves and feet in sequence. Air intensity is its own setting: turn the full air function on, then press the intensity button to move the compression up or down without touching the roller controls.
18 airbags
Two Stages of Zero Gravity
Zero gravity reclining on the OS-Champ stops at two different angles, and you pick which of the two you want from the remote. The first stage raises your legs to a shallower recline, and the second takes the backrest further and lifts the knees above the level of your heart. Two stopping points give a shorter user and a taller user each a reclined angle that keeps their calves seated inside the calf wells.
2 stages
Nine Inches of Space Saving
Space saving technology slides the whole base of the chair forward as the backrest goes down. The OS-Champ recovers up to 9 in. that a fixed-base recliner of the same size would demand behind it. That 9 in. is floor given back, not the gap to leave at the wall, which is a separate figure this chair does not carry. Upright the chair is 57.1 in. long and reclined it is 78.0 in., so the space saving is doing real work across a recline that adds nearly 21 in. of length at the front. Width holds at 29.5 in. in both positions, and that same figure is the minimum doorway you need to get it into the house.
Up to 9 in.

The list

Key features

The OS-Champ brings 18 airbags, two stages of Zero Gravity and 9 in. of space recovered as the base slides forward, with every feature standard in all three two-tone colorways.

L-track roller path
Neck to upper hamstrings
2D massage mechanism
Spot and partial targeting
18 airbag compression
Shoulders, arms, calves, feet
5 auto programs, 5 styles
15 minutes each, Demo 5
Two lumbar heating pads
Fixed at the low back
Foot rollers and ankle grip
Footrest extends 7.6 in.
Two-stage zero gravity
Recovers up to 9 in. of room
Bluetooth speakers
Built into the headrest

Closer look

How to use it

Osaki OS-Champ massage chair remote controller
Programs

Five Auto Programs on a Fifteen Minute Clock

Four of the five auto programs on the OS-Champ run for 15 minutes. Relax is the full body program, opening with slow kneading and heavy tapping before moving into deeper work at the neck and the lower back. Stretch is the full body stretching program, taking in the back muscles, the hands and the hamstrings. Upper Back and Lower Back are the two sectional programs, and Upper Back covers the head, neck and shoulder area with the massage style set by hand on the remote. Demo is a 5 minute run through what the chair can do, which is the program to use on someone sitting in it for the first time. Five massage styles sit underneath the automatic side for manual work, and the session timer can be set to 5, 10, 15, 20, 25 or 30 minutes.

  • 5 auto programs, four of them 15 minutes
  • Relax, Stretch, Upper Back, Lower Back and Demo
  • Demo runs 5 minutes
  • 5 massage styles for manual work
  • Timer at 5, 10, 15, 20, 25 or 30 minutes
5 auto programs 5 massage styles Spot and partial modes
Osaki OS-Champ massage chair extendable footrest and footwells
Feet

The Footrest Extends 7.6 in. by Hand

Two spinning reflexology rollers turn in the base of the footwells in a kneading pattern, and the foot airbags inflate around them so your sole is held down against the roller as it spins. Separately, an ankle grip function closes around the ankle and holds the foot steady in the well, so the foot stays where the hardware expects it through the whole program. Above the footwells the footrest extends manually up to 7.6 in., which is how the same chair fits a range of leg lengths and keeps each user's calves seated inside the calf airbags. Setting the footrest correctly is what puts the calf and foot compression where it belongs, and it takes a few seconds before the first session.

  • Two spinning reflexology rollers under the feet
  • Foot airbags press the sole onto the rollers
  • Ankle grip holds each foot in the well
  • Footrest extends up to 7.6 in.
2 foot rollers Ankle grip 7.6 in. extension
Osaki OS-Champ massage chair in the zero gravity reclined position
Size

The Numbers to Measure Before It Arrives

Upright, the OS-Champ measures 29.5 in. wide by 57.1 in. long by 44.1 in. tall. Fully reclined it measures 29.5 in. by 78.0 in. by 33.9 in., so the chair gains 20.9 in. of length across the recline while its height drops 10.2 in. Width never changes: 29.5 in. in both positions, and 29.5 in. is also the minimum doorway you need. Inside the frame, the shoulder opening is 18 in. across and the seat is 20.5 in. across, with a 260 lb maximum user weight. The chair weighs 203 lb net and 234 lb in its packaging. Two cords are worth knowing about: the 59.0 in. controller wire and the 70.9 in. power supply wire. The power wire sets how far the chair can sit from an outlet.

  • Upright 29.5 in. W x 57.1 in. L x 44.1 in. H
  • Reclined 29.5 in. W x 78.0 in. L x 33.9 in. H
  • Minimum doorway 29.5 in.
  • Shoulder width 18 in., seat width 20.5 in.
  • Net weight 203 lb, gross weight 234 lb
29.5 in. doorway 20.9 in. of recline growth 203 lb net

Compare

How it compares

The OS-Champ shares a 2D mechanism, foot rollers and lumbar heat with the chairs beside it, and differs from them in track shape, in its 18 airbags and in its five auto programs.

Osaki Ziva 2D massage chair
Osaki Ziva 2D
Trades the L shape for a full SL track and adds an automatic body scan, with the longest program list of the three.
2D rollers 24 air cells 12 auto programs Foot rollers
Shop the Osaki Ziva 2D
You're Here
Osaki OS-Champ massage chair in black and brown
Osaki OS-Champ
Rated to 260 lb against the OS-4000XT's 220 lb, with an ankle grip in each footwell to hold the foot on the rollers.
2D on an L-track 18 airbags 5 auto programs 260 lb user weight
Currently viewing
Osaki OS-4000XT massage chair
Osaki OS-4000XT
The same L-track path with six more airbags around it, a heart rate sensor in the armrest and a four-speaker sound system.
2D rollers L-track 6 auto programs Heart rate monitor
Shop the Osaki OS-4000XT

Questions

Frequently asked questions

Yes. The rollers run from your neck down the spine, then turn forward under the seat and finish across the glutes and the tops of the hamstrings. An S-track stops at the lower back, so the L-track is what buys you roller contact on the seat itself.
2D. The rollers move up and down the track and side to side across it at a set depth. A 3D mechanism adds an in-and-out axis you can adjust; on this chair the depth is fixed and the adjustable settings are the program, the style and the air intensity.
18 airbags, grouped at the shoulders, arms, calves and feet. The full body air program takes them through the shoulders, arms, palms, lower back, buttocks, thighs, calves and feet. Turn the full air function on and the intensity button moves the compression up or down.
Relax, Stretch, Upper Back, Lower Back and Demo. Each of the first four runs 15 minutes; Demo runs 5. Relax opens with slow kneading and heavy tapping and moves to the neck and lower back. Stretch works the back, the hands and the hamstrings. Underneath them sit 5 massage styles for manual work.
Yes. The OS-Champ has spot and partial modes, so you can hold the rollers on one point or run them across a chosen section. Upper Back and Lower Back are the two sectional auto programs, and you set the massage style by hand on the remote while they run.
The low back. Two heating pads sit at the lumbar, and they run alongside the rollers and the airbags. There is no calf or foot heat on this chair.
Yes. Two spinning reflexology rollers turn under the soles in a kneading pattern, with the foot airbags inflating to hold your sole against them. An ankle grip function closes around the ankle so the foot stays put in the well.
Up to 7.6 in., set by hand. Getting it right puts your calves inside the calf airbags and your soles on the foot rollers, which is what the compression and the roller contact both depend on.
Upright: 29.5 in. W x 57.1 in. L x 44.1 in. H. Reclined: 29.5 in. W x 78.0 in. L x 33.9 in. H. The length grows 20.9 in. through the recline and the height drops 10.2 in., while space saving technology recovers up to 9 in. by walking the base forward as the backrest goes down. That 9 in. is floor given back rather than the gap to leave behind the backrest, and those two figures are not the same measurement.
Plan on 29.5 in., which is the chair's width in both the upright and the reclined position. Then check every doorway, landing and turn between the truck and the room. The corner at the top of a staircase is where a chair this long gets stuck.
The chair weighs 203 lb net and 234 lb boxed, and it takes a user up to 260 lb. Inside the frame the shoulder opening is 18 in. across and the seat is 20.5 in. across. For scale, the Osaki OS-4000XT is rated to 220 lb.
A standard household outlet: 110 to 120 V AC, drawing 120 W. The power supply wire is 70.9 in. long and the controller wire is 59.0 in. The chair carries overheat and power protection, and it is rated for use between 32 and 95 degrees F at 20 to 80 RH humidity.
Three two-tone colorways: Brown and Beige, Cream and Taupe, and Black and Grey. The chair is the same underneath each one. Osaki back it with 3 years of parts coverage and 1 year of labor.
  • Mechanism: 2D
  • Track type: L-track
  • Air cells: 18
  • Auto programs: 5
  • Massage styles: 5
  • Heat: 2 lumbar pads
  • Zero gravity: 2-stage
  • Footrest extension: Up to 7.6 in.
  • Floor space recovered: Up to 9 in.
  • User capacity: 260 lb
  • Chair weight: 203 lb net, 234 lb gross
  • Upright dimensions: 29.5 in. W x 57.1 in. L x 44.1 in. H
  • Reclined dimensions: 29.5 in. W x 78.0 in. L x 33.9 in. H
  • Shoulder and seat width: 18 in. and 20.5 in.
  • Door clearance: 29.5 in. minimum
  • Power: 110 to 120 V AC, 120 W
  • Track: L-track carrying the rollers from the neck through the lower back to the glutes and upper hamstrings
  • Mechanism: 2D rollers moving up and down the track and side to side across it
  • Air massage: 18 airbags at the shoulders, arms, calves and feet
  • Auto programs: 5 programs: Relax, Stretch, Upper Back and Lower Back at 15 minutes each, Demo at 5
  • Massage styles: 5 styles for manual work, with spot and partial targeting
  • Heat: Two heating pads at the lumbar
  • Foot rollers: Two spinning reflexology rollers with the foot airbags pressing the sole onto them
  • Ankle grip: Grip function closing around the ankle to hold each foot in the well
  • Footrest: Extends by hand up to 7.6 in.
  • Zero gravity: Two stages, each a different reclined angle
  • Space saving: Base slides forward as the backrest drops, giving back up to 9 in. of floor
  • Audio: Bluetooth speakers built into the headrest


3 Year Standard Manufacturer's / Parts & Labor Warranty

 

This NON-TRANSFERRABLE Warranty is provided by Titan Chair LLC.

We guarantees that your qualified product will be replaced or repaired at our option, without cost to you, should it be deemed defective because of faulty parts, workmanship or structural defects during the first THREE (3) years of ownership, excluding specific limitations contained herein.

 

What Is Covered*:

  1. This warranty explicitly covers all parts, labor and framework of the chair.
  2. This warranty includes parts costs and labor for the first year at no cost to the customer.
  3. This warranty includes parts costs covered for the second year at no cost to the customer.
  4. Structural Framework on selected products carries for three (3) years.
  5. The additional extended warranties includes parts and labor costs covered at no cost to the customer.

What Is NOT Covered*:

  1. Any shipping expenses incurred. Transportation damage; theft; abuse; neglect; vandalism.
  2. Damages incurred due to shipping and handling, dropped products, improper installation, and/or unauthorized repairs do not constitute a defect under this warranty.
  3. Modifications or altered conditions of the original product, improper use of electrical/power supplies, electrical disturbances and power surges.
  4. Malfunctions due to improper use as well as unreasonable use or maintenance including failure to follow operating instructions.
  5. Any environmental conditions (examples: fire, floods, rust, corrosion, sand, dirt, windstorms, hail, earthquakes, and/or tornados) or any other exposure to weather conditions.
  6. This warranty does not include normal wear and tear including velcro or zipper malfunction, or tears in any fabric covering by abuse. Failures or attached points in stitching, Velcro, and zippers do not constitute as a defect for warranty.
  7. Softening/ hardening of foams and filling composites in pillows and pads; Fading, wear, and pilling of fabrics does not constitute a defect under this warranty as those items naturally change with use.
  8. Natural patterns and grains and variations in leather will not constitute as a defect under this warranty, as no two pieces of fabric are identical.
  9. The warranty shall not apply if the product has been damaged physically, whether intentionally or due accident or neglect: including stains, fluids, mold, water damage, animal damage, cuts, burns or is otherwise unsanitary, damaged or soiled.
  10. Products used in commercial or corporate settings.
  11. Products purchased from unauthorized dealers.
  12. Under this warranty, if a product is determined to be unfixable and requires replacement, the customer is responsible for placing the chair in the garage or another accessible location for the driver to pick up. The returned item must be properly packaged; otherwise, the agent will not be able to pick it up. Upon delivery, the delivery agent will place the chair in the driveway or the nearest accessible area, such as the garage.

Implied Warranty & Other Damages:

  1. Any implied warranties shall be limited to the duration of the 1 year portion of this limited warranty, and with regard to structural framework, limited to the duration of the 3 year portion of this limited warranty.
  2. By making a purchase, you agree that Titan Chair LLC. will not be liable for any items damaged and/or lost while en route to the specified address. Any claims for such loss or damage must be addressed and resolved with the designated carrier.
  3. In no case will Titan Chair LLC. be liable for incidental or consequential damages, whether such damages are claimed on account of breach of warranty, breach of contract, negligence or strict/product liability, including without limitation, damage to property (other than the product) or other economic losses.

How to obtain warranty service:

  1. You must provide proof of purchase for any warranty claim.
  2. You must obtain a return authorization number in order to ship products to a service center.
  3. You may obtain service advice, or an RMA number by contacting the Titan Chair LLC Customer Service department toll-free at 1-888-848-2630 ext.3.
  4. This warranty gives you specific legal rights. You may also have other rights that vary from state to state.

Titan Chair, LLC Warranty Limitations and Exclusions

Warranties are non-transferable, and do not cover any damage or loss caused by: use in a commercial or corporate setting; failure to follow operating instructions; Electrical disturbances and power surges; dropped product; including but not limited to remote controls; Damage resulting from improper use or maintenance; vandalism; environmental conditions; exposure to environmental conditions (rust, corrosion, sand, dirt, wind, hail, earthquake, tornado, fire, flood); loss of use during the period that the product is being repaired; products purchased from unauthorized resellers; alterations or modifications of original condition; theft; neglect; unauthorized repairs; loss of power.
Damage that occurred due to shipping and handling does not constitute a defect under this warranty. Fading, wearing, and the pilling of fabrics does not constitute a defect under the warranty. Failures of attach points such as stitching, Velcro, and zippers do not constitute a defect under this warranty. Under no circumstance shall Titan Chair, LLC or its representatives be liable for indirect, consequential, or incidental damages (including damages for lost profits, business interruption, bodily injury, medical, etc.), even if any party has been advised of the possibility of such damages.
Warranties are only valid within the 48 contiguous United States and Canada, provided the equipment has been operated according to the instructions accompanying it. All warranties begin on the DATE OF PURCHASE. Titan Chair, LLC, at its sole discretion, will repair or replace any defective part within a reasonable time frame.

Free Curbside Delivery – Average Shipping Time 7-10 Days

Curbside Delivery ships via Freight to the 48 contiguous states. The freight company will deliver your massage chair to a carport or first-floor entryway. Please check the box dimensions and ensure it will fit through your doorway. Assembly is required and can take 30-90 minutes, depending on the chair.

Threshold Delivery – Average Shipping Time 7-10 Days

Threshold Delivery ships via Freight to the 48 contiguous states. The freight company will deliver your massage chair inside your home (no stairs) just inside the doorway. Please check the box dimensions and ensure it will fit through your doorway. Assembly is required and can take 30-90 minutes, depending on the chair.

White Glove Delivery – Average shipping time 10-16 Days

In-Home Delivery and Assembly is the same as White Glove Delivery. Your massage chair will be shipped via Freight to the White Glove Delivery warehouse. They will contact you to schedule a delivery time and date when they receive your order.

The White Glove Delivery team consists of a two person installation team that will deliver (up to 2 flights of stairs), unpack, and install your massage chair in your room of choice. These are not professional massage chair installation experts but a furniture installation team. They may or may not have installed your massage chair model before.two-person