Skip to content

SaunaLife SaunaTrekker Portable Sauna Tent

Save 25% Save 25%
Original price $799.00
Original price $799.00 - Original price $799.00
Original price $799.00
Current price $599.25
$599.25 - $599.25
Current price $599.25

✓ Authorized SaunaLife Saunas Dealer
✓ Lowest Price Guaranteed
✓ FAST Shipping: In Stock and Ready to Ship
✓ FREE Delivery Damage Insurance Included
✓ Lifetime Manufacturer Warranty Included
✓ Questions? Call an RFA Team Member: 1-855-864-6442

Shipping & Delivery Information
Professional Installation Available

Rather not build it yourself? We partner with Pure Install for on-site sauna assembly.

  • Certified technicians assemble to the manufacturer's specification for your model
  • Function and safety check — temperature accuracy, responsiveness, calibration
  • Optional packaging, pallet and debris removal
  • One-year workmanship warranty on every new installation
  • Nationwide network, residential and commercial

See installation details and get started →

Warranty Information

SaunaTrekker Cube Tent

SaunaLife SaunaTrekker Portable Sauna Tent

The SaunaLife SaunaTrekker Portable Sauna Tent sets up as a cube for up to four people, with an interior 70 inches square and 78 inches from floor to ceiling. Its wall is built in three insulated layers under a waterproof coating, so the tent is made for four-season use outdoors. The frame arrives pre-assembled and integrated into the tent, with no loose poles to thread and no tools to find. Pulled open, it pops up in minutes, ready for the heater to go in.

Outside, the tent measures 70.9 by 70.9 inches and stands 86.6 inches tall. Storm lines, a bag and the installation guide are in the box, and the packed tent ships in a 55 by 20 by 20 inch carton at a shipping weight of 50 pounds. The heater it takes is the Titan SL1 propane heater, and the tent structure carries integrated ventilation openings. SaunaLife designs the SaunaTrekker, which is handcrafted in Northern Europe.

Interior
70 x 70 in.
78 in. of headroom
Capacity
Up to 4
Persons
Wall Build
3 layers
420 denier, fill, 210 denier
Shipping Weight
50 lbs
22.7 kg
Cube tent No tools required Waterproof outer shell Packs into a bag
SaunaLife SaunaTrekker, cube sauna tent with its front panel closed

Inside The Cube Wall

How it works

Heavy-duty zippers close the panels down, sealing the cube once it is standing.

A coated shell over a fiber fill
Outside, a waterproof coating goes over 420 denier oxford polyester. Behind it sits a 150 g/m2 fill of 100 percent polyester, and the inner surface is a smoother 210 denier oxford polyester that reflects heat back inside.
150 g/m2 fiber fill
Vents worked into the structure
Ventilation openings are worked into the structure itself, with an airflow vent in the shell beside the panoramic window. The Titan SL1 needs natural ventilation to run, through a lower intake and an upper outlet.
Integrated vents

Why The SaunaTrekker

Key features

The cube is made to go up, come down and travel in its own bag.

Panoramic window that rolls up
Window
Packs into its own transport bag
Carry Bag
Made for four-season outdoor use
Weather Resistant
Takes the Titan SL1 gas heater
Heater Compatible

The SaunaTrekker Up Close

How to use it

SaunaLife SaunaTrekker, quilted wall fabric and a strapped window panel
Materials

Fabrics quilted into one panel

The wall of this tent is three fabrics quilted into a single panel. On the outside, oxford polyester carries a waterproof coating over the weave, and behind it sits the polyester fiber fill, the layer doing the insulating work. The surface you touch on the inside is a smoother oxford polyester, chosen to reflect heat back into the cabin, and stitching through all three gives the fabric its padded look.

  • Waterproof-coated 420 denier oxford polyester on the outside
  • 150 g/m2 fill of 100 percent polyester
  • 210 denier oxford polyester inner surface
  • Quilted through all three layers
420 denier shell 150 g/m2 fill 210 denier lining
SaunaLife SaunaTrekker, two people pulling the tent frame open on grass
Setup

Putting it up by hand

The frame mechanism is pre-assembled and integrated into the tent, and setting up is a matter of pulling the structure open and then securing it. There are no separate poles to thread and nothing to bolt together. Storm lines ship in the box for anchoring, with a guy line and stake holding each corner of the quilted skirt down. Packing away runs the same way in reverse, into the bag that comes with the tent.

  • Pre-assembled, fully integrated frame mechanism
  • No loose poles and no tools required
  • Weather-ready storm lines for anchoring
  • Ground skirt staked at the corners
Integrated frame No tools Storm lines
SaunaLife SaunaTrekker, bench and backrest with the heater at the far end
Interior

Setting up the inside

A bench and backrest can run along one wall with the heater's stone column at the far end, and that bench is the cedar SaunaTrekker Bench, a separate accessory. The heater stands on a non-combustible surface such as a stone paver, never on grass, in the corner with the lower intake. A panoramic window panel rolls up and straps back, so one wall can be opened to the view or closed against the weather.

  • Interior 70 in. W x 70 in. D x 78 in. H (177.8 x 177.8 x 198.1 cm)
  • Exterior 70.9 in. W x 70.9 in. D x 86.6 in. H (180 x 180 x 220 cm)
  • Panoramic window panel rolls up and straps
  • Takes the Titan SL1 gas heater
Stone paver base 78 in. headroom Panoramic window
SaunaLife SaunaTrekker, packed tent bag and heater carried over grass
Transport

How the SaunaTrekker travels

Packed down, the tent goes into the bag that ships with it, a load two people can carry between them along with the heater. The bag rides in the back of a vehicle beside the heater, and since the Titan SL1 weighs 33 pounds and pairs with this tent, the whole sauna moves in one trip.

  • Packs into the supplied carry bag
  • Shipping carton 55 in. W x 20 in. D x 20 in. H
  • Shipping weight 50 lbs (22.7 kg)
  • Ships by parcel carrier
Carry bag 50 lbs shipped 55 x 20 x 20 in. carton

The Portable Set

How it compares

The cube keeps to a square 70.9-inch footprint, and the same propane heater warms it and the dome.

You're Here
SaunaLife SaunaTrekker, insulated portable sauna tent
SaunaTrekker
An insulated pop-up sauna tent that sets up in minutes without tools.
Seats up to 4 70.9 x 70.9 x 86.6 in. exterior Insulated 420D polyester shell Pop-up frame, no tools
Currently viewing
SaunaLife SaunaTrekker XL, insulated portable sauna tent pitched outdoors
SaunaTrekker XL
An insulated pop-up tent for up to six, packed in its own transport bag.
Seats up to 6 157.4 x 165.3 x 78.7 in. exterior Insulated 420D polyester shell Storm lines and transport bag
Shop the SaunaTrekker XL
SaunaLife Titan SL1, portable propane sauna heater with stones loaded
Titan SL1
A portable propane heater for the SaunaTrekker tents and ventilated sauna rooms.
Propane (LP), 20 lb tank Up to 27,600 BTU About 18 to 30 hours per tank Oxygen sensor and tip switch
Shop the Titan SL1

SaunaTrekker Questions

Frequently asked questions

It holds up to 4 persons. The interior is 70 inches square with 78 inches of headroom, and the heater stands inside that footprint, sharing the floor with the bathers.
Three layers. The outer shell is 420 denier oxford polyester with a waterproof coating, the core is a 150 g/m2 fill of 100 percent polyester, and the inner surface is 210 denier oxford polyester that reflects heat back into the cabin. The tent contains no wood at all, and it is weather-resistant and built for four-season outdoor use, with storm lines staked through the ground skirt at the corners.
No. The frame mechanism arrives pre-assembled and integrated into the tent, so there are no loose poles and no tools are required. Storm lines are in the box for anchoring the tent once it is open, and the installation guide that ships with it covers the first setup.
The Titan SL1 gas sauna heater, which is made for use in the SaunaTrekker tents. It does not come with the tent and is bought separately; it runs on a standard propane tank and weighs 33 lbs without stones, which keeps it in the same carry-it-there category as the tent.
No. The box holds the sauna tent, storm lines, a bag and the installation guide. The SaunaTrekker Bench is a folding cedar bench sold on its own that fits both the SaunaTrekker and the SaunaTrekker XL.
It ships by parcel in a carton measuring 55 x 20 x 20 in. with a shipping weight of 50 lbs (22.7 kg). Plan on two people for the carry from the car to the spot you want it.
Yes. The SaunaTrekker Tent Connector zips in between two standard-size SaunaTrekker tents to create a pass-through, and it is built in the same way as the tent walls, with a polyester outer layer, a polyester inner layer and fiber-fill insulation in the middle. It is an accessory, not part of this package.
Shape and size. This one is a cube for up to four people. The SaunaTrekker XL is a dome for up to six, 157.1 by 165 inches inside with 78.4 inches of headroom, and it ships at 80 lbs. Both use the same three-layer wall and both take the Titan SL1.
Yes. Ventilation openings are worked into the structure of the tent, and an airflow vent sits in the shell alongside the panoramic window. The Titan SL1 needs that natural ventilation to run, standing on a stone paver or similar non-combustible surface in the corner with the lower intake, and its own installation and operation manual sets out how it is to be used.
SaunaLife backs the SaunaTrekker for the original retail purchaser, and Recovery For Athletes is an authorized SaunaLife reseller.
Yes. We know putting a sauna together can feel like a daunting task, so we offer professional assembly by a crew that assembles saunas all the time. After you order, fill out the form at pureinstall.com/recovery-for-athletes-sauna-setup and they'll take it from there. Assembly runs $800 to $3,000 depending on the size and complexity of the model, paid directly to the installer. Electrical isn't included, so you'll want an electrician lined up or the right power already in place.
  • Shape: Cube
  • Occupancy: Up to 4 persons
  • Interior Dimensions: 70"W x 70"D x 78"H (177.8 x 177.8 x 198.1 cm)
  • Exterior Dimensions: 70.9"W x 70.9"D x 86.6"H (180 x 180 x 220 cm)
  • Construction Material: Oxford polyester, polyester fiber-fill
  • Heater Compatibility: SaunaLife Titan SL1 gas sauna heater
  • Shipping Dimensions: 55"W x 20"D x 20"H (139.7 x 50.8 x 50.8 cm)
  • Shipping Weight: 50 lbs (22.7 kg)
  • Contains Wood: No
  • Capacity: Up to 4 persons
  • Shape: Cube tent
  • Outer Shell: 420 denier oxford polyester with a waterproof coating
  • Insulation Core: 150 g/m2 fill of 100% polyester
  • Inner Lining: 210 denier oxford polyester, heat reflective
  • Setup: Pre-assembled integrated frame, no tools required
  • Ventilation: Integrated ventilation openings
  • Outdoor Use: Weather-resistant, four-season outdoor use
  • Heater Compatibility: Titan SL1 gas sauna heater
  • Origin: Designed by SaunaLife and handcrafted in Northern Europe
  • Storm Lines: Weather-ready storm lines and a transport bag included
  • Sauna Tent: Included
  • Storm Lines: Included
  • Bag: Included
  • Installation Guide: Included