BioLight ReCharge Red Light Therapy Panel: Touch Screen, Adjustable Brightness & Pulsed Frequencies

BioLight ReCharge Red Light Therapy Panel: Touch Screen, Adjustable Brightness & Pulsed Frequencies

Name: BioLight ReCharge Red Light Therapy Panel: Touch Screen, Adjustable Brightness & Pulsed Frequencies
Brand: BioLight
SKU: RECHARGE
Price: 999.0 USD
Availability: InStock

by BioLight

$999.00 - $999.00

$999.00

$999.00 - $999.00

$999.00

✓ Authorized BioLight Dealer
✓ Lowest Price Guaranteed
✓ FREE & FAST Shipping: In Stock and Ready to Ship
✓ Questions? Call an RFA Team Member: 1-855-864-6442

BioLight | ReCharge

BioLight ReCharge Tabletop Panel

The ReCharge is the smallest panel BioLight builds: 11.3 in. by 8.3 in. of face on a 2.6 in. body, 8 lbs on the scale, 60 LEDs at 660nm red and 850nm near-infrared. It sits on a desk or a bench and covers one area at a time, and BioLight gives it the same touchscreen, the same 1 to 100% brightness control and the same pulse rate control that sits on their full-body ReStore panel.

BioLight's reference figure for it is 63 mW/cm2 at 6 in. at 100% brightness. That number is worth reading with its distance attached, because the panel is small enough that a few inches either way changes it. The rest of the specification is short and clean: 136W, two cooling fans, 100-240VAC at 50/60Hz, a 30 degree focusing lens on each LED, three light settings, a programmable timer, published flicker of 1.2% modulation at 60Hz, and a stated 3 year warranty with a 100,000 hour LED lifespan.

Brightness 1 to 100% Pulse rate up to 10,000 Hz 8 lbs, sits on a table 30 degree focusing lens

BioLight ReCharge tabletop red light panel

Reading the controls

A Brightness Percentage Is a Setting

Every BioLight panel dims from 1 to 100%, and every one of them publishes a table of what those settings produce. Knowing how to read that table is the difference between a number you can use and a number you cannot.

🎚

What a Published Irradiance Table Is For

A brightness percentage tells you where the control is set. It does not tell you how much light lands on a surface, because that depends on the array behind the control and on how far away the surface is. An irradiance table closes that gap: the manufacturer measures the output at each brightness step, at one stated distance, and publishes both. BioLight's reference figure for the ReCharge is 63 mW/cm2 at 6 in. at 100% brightness, and that is the figure this page stands on. The per-step table BioLight publishes underneath it is internally inconsistent, listing the 75% step above the 100% step, so we are not reproducing it here as though it described a working sequence.

63 mW/cm2 at 6 in.

💡

60 LEDs at 660nm and 850nm

Sixty emitters across an 11.3 in. by 8.3 in. face, each behind a 30 degree focusing lens that narrows its cone forward. Three settings run the array: red and near-infrared together, red only, or near-infrared only. BioLight calls the emitter their patent-pending Dual LED technology and describes each diode as producing both wavelengths. That description is BioLight's, and no patent or application number is published with it.

30 degree focusing lens

📱

The Same Touchscreen as the Full-Body Panel

BioLight removed the physical buttons from this generation and put the light setting, the brightness, the pulse rate and the timer on a touchscreen. Pulse rate reaches 10,000 Hz, which is the same ceiling as their 36 in. ReStore panel, and the timer is programmable so the panel shuts itself off. Published light flicker is 1.2% modulation at 60Hz.

Up to 10,000 Hz

📦

Eight Pounds and 136 Watts

The whole panel weighs 8 lbs and is 2.6 in. deep, which is what puts it on a desk or a bench, and it draws 136W through two cooling fans on 100-240VAC at 50/60Hz. For scale inside BioLight's own range, their ReStore draws 476W through 8 fans and their ReJuvenate draws 3000W through 20. LED lifespan is published at 100,000 hours.

8 lbs, two fans

The numbers

Eight Figures From BioLight's ReCharge Specification

The irradiance figure below is quoted at 6 in., the distance BioLight measured this panel at.

💡

60 LEDs

11.3 in. x 8.3 in. face

📈

63 mW/cm2 at 6 in.

100% brightness

🌈

660nm red, 850nm near-infrared

Three light settings

〰

Pulse rate up to 10,000 Hz

Or continuous

📱

Touchscreen and timer

Brightness 1 to 100%

🔍

30 degree focusing lens

Beam angle per LED

🔌

136W through two fans

100-240VAC at 50/60Hz

🛡

8 lbs, 100,000 hour LEDs

3 year warranty, 60 day return

Closer look

The Face, the Screen and What Arrives With It

BioLight ReCharge panel face with 60 LEDs

The panel

Sixty Emitters on an Eleven Inch Face

The ReCharge's face measures 11.3 in. by 8.3 in. on a 2.6 in. body, with 60 LEDs across it at 660nm red and 850nm near-infrared. Each sits behind a 30 degree focusing lens, so the cone is narrow and the panel is aimed at one area at a time. BioLight's reference output for it is 63 mW/cm2 at 6 in. at full brightness. Three settings decide what comes out of the array: both wavelengths together, red only, or near-infrared only, and the near-infrared-only setting looks close to dark because 850nm sits past the visible band.

11.3 in. x 8.3 in. x 2.6 in., 8 lbs
60 LEDs at 660nm and 850nm
63 mW/cm2 at 6 in. at 100% brightness
30 degree focusing lens on each LED
Three light settings: combined, red only, near-infrared only

60 LEDs 63 mW/cm2 at 6 in. 8 lbs

BioLight ReCharge touchscreen control panel

Controls

Full-Panel Controls on a Tabletop Body

Nothing was removed from the control set to make this the small one. The touchscreen carries the light setting, brightness from 1 to 100%, pulse rate to 10,000 Hz and a programmable timer, the same four controls that sit on BioLight's 36 in. ReStore. Brightness and pulse rate work independently of each other. One note on BioLight's own figures: they publish the bottom of the pulsing range two ways on the same page, as 0 Hz in the description and 1 Hz in the specification block, with 10,000 Hz as the ceiling in both.

Touchscreen replaces the physical buttons
Brightness adjustable from 1 to 100%
Pulse rate up to 10,000 Hz, or continuous
Programmable timer runs the session and shuts it off
Light flicker published at 1.2% modulation at 60Hz

Touchscreen 1-100% brightness To 10,000 Hz

Setup

What Actually Arrives in the Carton

BioLight's package list for the ReCharge is four items: the panel with a plug matched to your shipping country, protective eyewear, the owner's manual and their Red Light Therapy Guide ebook. One thing to be clear about before you order, because BioLight's own page is not: their description praises the compact panel and stand design, but no stand appears anywhere in their package contents, and none is offered as an option. Plan on standing the panel on a table or a bench. We have asked BioLight to confirm whether a stand exists for this model.

ReCharge panel with a country-matched power plug
Protective eyewear
Owner's manual and The Red Light Therapy Guide ebook
No stand is listed in BioLight's package contents
BioLight states roughly 3 to 4 weeks for delivery

Eyewear included No stand listed Ships direct

Compare

Four BioLight Panels and Pods, Side by Side

The ReCharge and the ReStore are both quoted at 6 in., so their figures can be read against each other. The Cocoon is quoted at contact and the ReJuvenate carries two unreconciled values, so neither is set against the panels here.

You're Here

BioLight ReCharge

The tabletop of the group at 11.3 in. by 8.3 in. and 8 lbs, with 60 LEDs rated 63 mW/cm2 at 6 in.

60 LEDs 63 mW/cm2 at 6 in. 8 lbs 136W power draw

Currently viewing

BioLight ReStore

A 36 in. by 12 in. full-body panel with 300 LEDs at 56.9 mW/cm2 at 6 in., shipping with both a floor stand and a door hanger.

300 LEDs 56.9 mW/cm2 at 6 in. Stand and door hanger 476W power draw

Shop the BioLight ReStore

BioLight ReJuvenate

BioLight's largest panel at 66 in. by 23 in., carrying 1008 LEDs, 20 cooling fans and a 3000W power draw.

1008 LEDs 66 in. tall panel 20 cooling fans 3000W power draw

Shop the BioLight ReJuvenate

BioLight Cocoon

A zip-around pod holding 3600 LEDs that opens flat into a 69 in. by 71 in. mat and weighs 17.4 lbs.

3600 LEDs 360 degree enclosure 5 intensity levels 17.4 lbs

Shop the BioLight Cocoon

Questions

Frequently Asked Questions

63 mW/cm2 at 6 in. at 100% brightness. That is BioLight's own reference figure for this panel and it is the one we publish. Six inches is the only measurement distance BioLight gives for the ReCharge, so read the number with the distance attached and expect a different reading if you sit closer or further back.

Because their step table does not hold together. BioLight publishes 63 mW/cm2 at 6 in. at 100% and 66 mW/cm2 at 6 in. at 75%, which puts the dimmer setting above the brighter one, and they offer no explanation for it. A brightness ladder that runs backwards cannot be used to plan anything, so we are publishing the 100% reference figure that BioLight themselves repeat in their specification block, and leaving the rest of the table alone. We have asked BioLight to correct or confirm it, and we will publish the corrected ladder when they do.

11.3 in. x 8.3 in. x 2.6 in. at 8 lbs. That is small enough to sit on a desk, a bench or a nightstand and light enough to carry between rooms. Shipped dimensions and shipped weight are not published.

No stand appears in BioLight's package contents. Their four listed items are the panel with a country-matched plug, protective eyewear, the owner's manual and their ebook. BioLight's marketing copy for this model does describe a compact panel and stand design, which reads as a contradiction of their own package list, and no stand is offered as a paid option either. Plan on a table or a bench. We have put the question to BioLight.

660nm red and 850nm near-infrared, across all 60 LEDs, with three settings: both together, red only, or near-infrared only. Near-infrared at 850nm sits past the visible band, so the near-infrared-only setting looks close to dark while it runs.

Up to 10,000 Hz, the same ceiling as BioLight's much larger ReStore panel. BioLight publishes the floor of that range two ways on the same page, as 0 Hz in their description text and 1 Hz in their specification block. They name no preset frequencies and publish no recommended setting, and we are not going to invent one.

Size and array, not controls. The ReCharge is 11.3 in. by 8.3 in. with 60 LEDs drawing 136W through two fans, at 8 lbs. The ReStore is 36 in. by 12 in. with 300 LEDs drawing 476W through eight fans, at 18 lbs, and ships with a floor stand and a door hanging kit. Both carry the same touchscreen, the same 1 to 100% brightness, the same 10,000 Hz pulse ceiling and the same 30 degree lens.

136W on 100-240VAC at 50/60Hz, which BioLight states covers both US and Canadian supply and international supply. Two cooling fans move heat off the array. LED lifespan is published at 100,000 hours.

Light flicker is given as 1.2% modulation at 60Hz. EMF emission is given as standard magnetic 0.3 mG, standard electric 30 V/m, weighted magnetic 0.3 mG, weighted electric 24 V/m and RF 0.5 mW/m2. No measurement distance, laboratory name or report number is published alongside those readings.

BioLight suggests starting at 5 to 10 minutes per area and building toward 10 to 15 minutes as tolerated, used 3 to 5 times per week or daily. That guidance is BioLight's own. The programmable timer runs the clock and shuts the panel off at the end.

BioLight's own name for the emitter used here and in the ReStore, which they describe as patent-pending and as letting each individual LED produce both wavelengths. BioLight publishes no patent number, application number, filing date or jurisdiction for it, so the patent-pending description belongs to them and is attributed to them here. It is not a claim we make on our own account.

BioLight publishes a 3 year warranty, a 60 day return period and a 100,000 hour LED lifespan. Orders ship direct from BioLight's manufacturer and they ask buyers to allow roughly 3 to 4 weeks for delivery.

The statements on this website have not been evaluated by the FDA (U.S. Food & Drug Administration). Our products are not intended to diagnose, treat, cure, or prevent any disease.

Wavelengths: 660nm red and 850nm near-infrared
LED count: 60 LEDs
Irradiance: 63 mW/cm2 at 6 in. at 100% brightness (BioLight's reference figure). Their per-step table is non-monotonic, listing 75% at 66 mW/cm2, above the 100% figure, and is not reproduced
Light pulsing: Up to 10,000 Hz. BioLight publishes the floor two ways on the same page: 0 Hz in the description and 1 Hz in the specification block
Brightness: 1-100%, adjustable
Light settings: Red and near-infrared combined, red only, near-infrared only
Beam angle: 30 degree focusing lens
Dimensions: 11.3 in. x 8.3 in. x 2.6 in.
Weight: 8 lbs
Power: 136W
Electrical input: 100-240VAC 50/60Hz
Cooling fans: 2
Controls: Touchscreen with programmable timer
Light flicker: 1.2% modulation at 60Hz
EMF emission: Standard magnetic 0.3 mG, standard electric 30 V/m, weighted magnetic 0.3 mG, weighted electric 24 V/m, RF 0.5 mW/m2
Mounting: No stand is listed in BioLight's package contents and none is offered as an option
LED lifespan: 100,000 hours
Warranty: 3 years
Return period: 60 days
Session time: Start at 5-10 minutes per area, building toward 10-15 minutes
Lead time: Approximately 3-4 weeks, ships from BioLight's manufacturer

60 LEDs: 11.3 in. x 8.3 in. face
63 mW/cm2 at 6 in.: 100% brightness
660nm red, 850nm near-infrared: Three light settings
Pulse rate up to 10,000 Hz: Or continuous
Touchscreen and timer: Brightness 1 to 100%
30 degree focusing lens: Beam angle per LED
136W through two fans: 100-240VAC at 50/60Hz
8 lbs, 100,000 hour LEDs: 3 year warranty, 60 day return

ReCharge panel: With a power plug matched to the shipping country
Protective eyewear: Included
Owner's manual: Included
The Red Light Therapy Guide ebook: Included