Description
Not designed for rack-mounted storage on Profile® racks.
Be smart with your space and store your barbell vertically on an upright or crossmember of your Build Limitless rack.
The Build Limitless® Rack Mount Barbell Hanger holds the barbell vertically by its sleeve on an upright or crossmember of your choice. It is finished with a scratch-resistant powder coat - protecting both your storage unit and barbell from gouges and scratching.
Made in the USA.
Specs
Single Barbell
| Color & Finish |
Black powder coat |
| Weight |
3lb |
| Dimensions |
7" x 3" x 4" (HxWxD) |
| Barbell Slot Size |
1.25" inside diameter (fits Olympic barbells)
|
Double Bar
| Color & Finish |
Black powder coat |
| Weight |
3lb |
| Dimensions |
8.25" x 6.5" x 4.5" (HxWxD) |
| Barbell Slot Size |
1.25" inside diameter (fits Olympic barbells)
|
| Hole Spacing |
4" and 6" |
| Hole Size |
5/8" |
Triple Barbell
| Color & Finish |
Black powder coat |
| Weight |
4lb |
| Dimensions |
8.25" x 10" x 4.5" (HxWxD) |
| Barbell Slot Size |
1.25" inside diameter (fits Olympic barbells)
|
| Hole Spacing |
4" and 6" |
| Hole Size |
5/8" |
Four Barbell
| Color & Finish |
Black powder coat |
| Weight |
6lb |
| Dimensions |
4" x 14.5" x 4" (HxWxD) |
| Barbell Slot Size |
1.25" inside diameter (fits Olympic barbells)
|
All rack mounting hardware is included.
Suggested Space
Not designed for rack-mounted storage on Profile® racks.
The Single Barbell Storage is designed to be mounted on the top available holes on an upright.
The Double and Triple Barbell Storage is design to be mounted on the uprights of your squat rack.
The Four Barbell Storage is designed to be mounted on a top crossmember that will not interfere with any plate storage or lifting exercises. We recommend using the back crossmember.
How much vertical space you need will depend on the barbell. We suggest adding 5" to the length of your barbell to calculate your minimum ceiling height. This will allow adequate room to store and remove the barbell without touching the floor or ceiling.
