Skip to content
Our Story Our Athletes Why Buy From Us Reviews FAQs Contact Us Learning Center B2B Sales FSA/HSA Recovery Rooms Rewards Program My Account
Solbasium Polar Cold Plunge Tub
Solbasium Polar Cold Plunge Tub
Solbasium Polar Cold Plunge Tub
Solbasium Polar Cold Plunge Tub

Solbasium Polar Cold Plunge Tub

by Solbasium
$8,990.00 - $8,990.00
$8,990.00
$8,990.00 - $8,990.00
$8,990.00

✓ Authorized Solbasium Dealer
✓ Lowest Price Guaranteed
✓ FREE & FAST Shipping: In Stock and Ready to Ship
✓ Questions? Call an RFA Team Member: 1-855-864-6442

Cold Plunge + Hot Tub — All-in-One

Polar Cold Plunge Tub (Elite One)

The Polar Cold Plunge Elite One Model is the full-stack home cold plunge — chiller, heater, filtration, ozone sanitation, water circulation pump, underwater lights, and app control built into one acrylic tub. Plug it into a standard 120V outlet, fill it, and the tub handles temperature, water quality, and circulation on its own.

The 1HP chiller cools the water by up to 5°F per hour and the temperature range runs from 37°F to 108°F — so the same tub serves as a cold plunge in the morning and a hot soak in the evening. A 20-micron paper-core filter pulls particulate out of the water continuously; ozone sanitation keeps the water clean between fills. Underwater lights run during sessions.

77" long × 32" wide × 28" tall — sized to fit standard rooms, garages, patios, and basements. Built from acrylic for durability and easy cleaning. The Solbasium App lets you dial in the target temperature from your phone before you walk over to step in.

Chiller
1 HP
Cools 5°F per hour
Temp Range
37° – 108°F
Cold plunge + hot soak
Filtration
20 Micron + Ozone
Continuous cleaning
Dimensions
77" × 32" × 28"
L × W × H
Solbasium App — Control from Phone Zero Setup — Fill + Plug In Standard 120V Outlet Acrylic Construction
Solbasium Polar Cold Plunge Tub

The System

A self-contained cold plunge + recovery tub.

Cooling, heating, filtration, sanitation, circulation, and lighting — all integrated and controllable from your phone. No external chillers, no add-on filtration loops.

❄️
1 HP Chiller — 5°F per Hour
A 1-horsepower chiller drops the water temperature by up to 5°F per hour. Set a target, walk away, and the system gets the tub down to plunge temperature on its own. The chiller can pull water down to a minimum of 37°F — close to the freezing point, the standard cold-plunge target range.
1 HP · 5°F / hr · Min 37°F
🔥
Heating Function to 108°F
Same tub, opposite direction. The integrated heating function takes water up to 108°F — hot-tub territory — so the Polar doubles as a hot soak when you want heat instead of cold. The 37° – 108°F range gives you both modalities on the same equipment, no second tub required.
Up to 108°F
💧
20-Micron Filtration + Ozone Sanitation
A paper-core 20-micron filter pulls particulate out of the water continuously. Ozone sanitation handles the bacterial side — generating ozone in-line and circulating it through the water. Combined, the two systems keep the tub clear between fills without manual chlorine dosing.
20-Micron + Ozone
📱
Solbasium App Control
Set the target temperature from your phone via the Solbasium App. Dial in the right temperature before you walk over — start the chiller while you're still at the office or in the gym, so the tub is ready when you arrive.
Smartphone Remote Control

Why the Elite One

Everything you need to plunge daily, built in.

❄️
1 HP Chiller
5°F per Hour
🌡️
37° – 108°F Range
Cold + Hot
🦠
Ozone Sanitation
In-Line
🧊
20-Micron Filter
Paper Core
📱
Solbasium App
Phone Control
🔌
Standard 120V Outlet
No Electrician
💡
Underwater Lights
Built In
📐
Acrylic Construction
Durable + Easy Clean

Inside the Tub

What the Elite One does that other tubs don't.

Polar Cold Plunge Tub chiller and filtration system
All-in-One Build

Chiller, heater, filter, ozone — built in.

Most home cold plunges require a separate external chiller, separate filtration, separate sanitation. The Elite One puts all four systems inside one tub: 1HP chiller, heating function, 20-micron filter, ozone sanitation, water circulation pump, and underwater lights. The setup is fill-and-plug — no external loops to route, no second appliance to find space for. Plus it's "packed with nearly $1,000 in extras at no additional cost" per Solbasium.

  • 1HP chiller — integrated, not external
  • Heating function for hot-soak mode (up to 108°F)
  • Water circulation pump — built in
  • Underwater lights — built in
  • Ozone + 20-micron filter — continuous sanitation
All-in-One Zero External Hardware
Polar Cold Plunge Tub in residential setting
Setup

Fill, plug in, plunge.

Setup is intentionally simple. Run a hose into the tub (a fill filter is included), plug the unit into a standard 120V outlet — same outlet your refrigerator uses — and start the chiller. There's no special wiring requirement, no plumbing installation, no need to run cold water lines or drainage to a specific location. Acrylic construction is durable and easy to clean, and the form factor (77" × 32" × 28") fits in a garage, basement, patio, or home gym without specialty siting.

  • Standard 120V outlet — no electrician required
  • Hose-fill with included filter
  • Acrylic body — easy to clean, durable
  • 77" × 32" × 28" footprint — fits standard rooms
120V Plug-and-Play Acrylic Build Home or Commercial Use

Full Spec Sheet

Specifications

Cooling & Heating

Chiller1 HP
Cooling rateUp to 5°F per hour
Temperature range37°F – 108°F
Heating functionIncluded — same tub heats and cools

Filtration & Sanitation

Filter20-micron paper-core filter
SanitationOzone disinfection (in-line)
CirculationBuilt-in water circulation pump

Build & Dimensions

ConstructionAcrylic
Dimensions77" L × 32" W × 28" H
LightingUnderwater lights included

Power & Control

PowerStandard 120V outlet
AppSolbasium App (smartphone)
SetupZero — fill via included hose + filter, plug in

Built With Purpose

2% of every purchase goes to the National Pediatric Cancer Foundation.

Solbasium contributes 2% of every product sale — including the Polar Cold Plunge Tub — to the National Pediatric Cancer Foundation.

Questions

Frequently Asked Questions

The 1HP chiller can bring the water down to 37°F — close to the freezing point and within the standard cold-plunge target range. The chiller cools at a rate of up to 5°F per hour, so from room temperature (~70°F) you're at plunge-ready in roughly 7 hours, or you can pre-set via the Solbasium App from your phone.
Yes. The Elite One has a built-in heating function that takes water up to 108°F — same tub heats and cools. The full temperature range is 37°F – 108°F.
Zero setup. Fill the tub using a hose and the included filter, then plug into a standard 120V outlet — same outlet your fridge uses. No electrician, no plumbing installation, no special wiring required.
Two systems run continuously. A 20-micron paper-core filter handles particulate filtration, and ozone sanitation handles bacterial control. The water circulation pump moves water through both systems on a continuous loop. Per Solbasium: this keeps the water crystal clear without manual chemical dosing between fills.
77 inches long × 32 inches wide × 28 inches tall. Designed to fit in a home gym, garage, basement, or patio without specialty siting. The compact footprint is part of why Solbasium positions the Elite One for residential users as well as commercial recovery clinics.
Yes — the Solbasium App lets you set the target temperature remotely. Start the chiller before you leave work so the tub is at temp by the time you get home, or schedule a hot soak before evening recovery.