Skip to content
Our Story Our Athletes Why Buy From Us Reviews FAQs Contact Us Learning Center B2B Sales FSA/HSA Recovery Rooms Rewards Program My Account
Sweat Kingdom Sweat Barrel 2-6 Person Sauna
Sweat Kingdom Sweat Barrel 2-6 Person Sauna
Sweat Kingdom Sweat Barrel 2-6 Person Sauna
Sweat Kingdom Sweat Barrel 2-6 Person Sauna
Sweat Kingdom Sweat Barrel 2-6 Person Sauna

Sweat Kingdom Sweat Barrel 2-6 Person Sauna

by Sweat Kingdom
$5,295.00 - $10,395.00
$5,295.00
$5,295.00 - $10,395.00
$5,295.00

✓ Authorized Sweat Kingdom Dealer
✓ Lowest Price Guaranteed
✓ FREE & FAST Shipping: In Stock and Ready to Ship
✓ Questions? Call an RFA Team Member: 1-855-864-6442

Sweat Kingdom · Barrel Saunas · The Sweat Barrel

A handcrafted red cedar barrel sauna built for the heat the research is actually about.

Handcrafted in East Idaho from highest-quality red cedar. Three sizes covering 2–6 people. Heater options reach 110–230°F in 45–90 minutes depending on the configuration you choose. Indoor or outdoor.

The Sweat Barrel is a traditional sauna designed for efficiency. The barrel shape minimizes interior volume relative to seating capacity, which means the heater hits operating temperature faster and the cabin holds heat through longer sessions. Three sizes — Regular, Large, and XL — cover everything from a couple to a six-person group. Two heater families (Harvia KIP and HUUM Drop) at multiple wattages let you size the electrical install to your space rather than overbuying. Made in the USA with a 3-year warranty.

230°F
Max temperature (heater dependent)
45–90 min
Time to operating temperature
3 sizes
Regular, Large, and XL
USA built
Handcrafted in East Idaho

The three things a barrel sauna gets right that a square box doesn't

Minimum interior volume per seat

A barrel cross-section seats the same people in less air volume than a square cabin. Less volume means faster heat-up — 45–90 minutes to operating temperature depending on size and target temperature — and lower running cost across daily use.

Premium red cedar handcrafted in Idaho

Highest-quality red cedar, sourced for the build. Red cedar naturally resists moisture and decay, enhances heat retention through low thermal conductivity, and produces the cedar scent that defines an authentic sauna. Handcrafted, not flat-packed from offshore stock.

Two heater families, three wattages

Harvia KIP (6kW or 8kW) or HUUM Drop (6kW or 9kW). Pick the heater that matches your size choice and your electrical service — 6kW units run on 30A, 8kW on 40A, 9kW on 50A.

Why people pick the Barrel over a cube-shaped cabin

It heats faster

Smaller interior volume per seat means faster heat-up. The difference between 45 minutes and 90 minutes depends on your size and temperature target, but barrels are categorically quicker than cube saunas of the same capacity.

Three sizes, real differences

Regular (6'×4'), Large (6'×6'), and XL (6'×7') aren't marketing tiers — they're meaningful capacity steps. Pick the footprint your space and group size actually require.

Indoor or outdoor

The cedar shell handles outdoor exposure. Same unit, same warranty, whether you put it on a patio or in a basement.

USA-made with 3-year warranty

Handcrafted in East Idaho. Standard 3-year warranty. Domestic build means parts and service are local.

A closer look

Sweat Barrel sauna exterior — handcrafted red cedar barrel

Handcrafted in East Idaho from highest-quality red cedar

The Sweat Barrel is built one cabin at a time in East Idaho. Highest-quality red cedar, selected for the build — natural moisture and decay resistance, low thermal conductivity for heat retention, and the authentic cedar aroma every traditional sauna session carries.

Sweat Barrel interior bench and heater detail

Why the barrel shape heats faster

A barrel cross-section seats the same number of people in less interior air volume than a square cabin. Less air to heat means 45–90 minute heat-up depending on size and target temperature — and lower running cost across daily use. The curved walls also reflect heat down toward the benches more effectively than flat planes do.

Sweat Barrel tempered glass door and front face panel

Two heater families, three wattages — match your electrical service

Harvia KIP (6kW or 8kW) for the classic Finnish heater approach, or HUUM Drop (6kW or 9kW) for the modern Estonian-designed option. 6kW units run on 30A, 8kW on 40A, 9kW on 50A — pick the wattage that fits the breaker you have rather than upgrading the panel.

Sizes

Three barrel sizes. Same construction, same heater options — choose the footprint that fits your space and seating needs.

Regular

  • H 6' × D 4' × W 6'
  • Compact footprint for solo or pair use

Large

  • H 6' × D 6' × W 6'
  • 4–6 person capacity

XL

  • H 6' × D 7' × W 6'
  • Maximum interior depth

Choose your heater

Two heater families. Wattage and electrical service determine which fits your install.

Harvia KIP 6kW

30A breaker, 10/2 wire gauge, hardwired connection. The everyday workhorse — proven Finnish heater technology in the most common wattage class.

Harvia KIP 8kW

40A breaker, 8/2 wire gauge, hardwired. Steps up to handle the Large and XL footprints, faster heat-up under cold-start conditions.

HUUM Drop 6kW

30A breaker, 10/3 wire gauge, hardwired. HUUM's modern Estonian-designed heater — clean profile and a different aesthetic from the Harvia.

HUUM Drop 9kW

50A breaker, 6/3 wire gauge, hardwired. The high-output option — fastest heat-up across the lineup, paired well with the XL footprint.

What's included

Red cedar barrel sauna kit
Pre-cut staves, hardware, and assembly fittings — sized per your size selection
Heater
Harvia KIP or HUUM Drop, depending on configuration ordered
Sauna stones
Included for the heater rock well
Durable interior benches
Cedar benches sized to the selected footprint
Tempered glass front door
Pre-installed in the door panel
Flat interior floor
No raised lip — full usable floor surface

Assembly

1

Lay out the staves and base supports

Two to three people. Standard tooling: power drill, rubber mallet, hammer, measuring tape, and a skill saw or table saw.

2

Build the barrel shell

Stand the staves on the base supports and ring them with the included bands. Install the front and rear face panels with the tempered glass door pre-installed.

3

Install benches and the heater

Mount the cedar interior benches. Set the Harvia KIP or HUUM Drop heater per configuration and load sauna stones. Hardwired electrical connection by a licensed electrician.

4

Final fit-out and first burn-in

Verify all bands are torqued to spec, door swings cleanly, and bench mounts are secure. Run a heater burn-in cycle per the manufacturer's instructions. Total assembly: 3–4 hours with 2–3 people.

Specifications

Dimensions

RegularH 6' × D 4' × W 6'
LargeH 6' × D 6' × W 6'
XLH 6' × D 7' × W 6'

Heat performance

Max temperature110–230°F
Time to temperature45–90 minutes (size and target dependent)

Heater options & electrical

Harvia KIP 6kW30A breaker, 10/2 wire, hardwired
Harvia KIP 8kW40A breaker, 8/2 wire, hardwired
HUUM Drop 6kW30A breaker, 10/3 wire, hardwired
HUUM Drop 9kW50A breaker, 6/3 wire, hardwired
InstallHardwired connection by a licensed electrician required

Construction

MaterialHighest-quality red cedar
DoorTempered glass front door
FloorFlat interior floor
UseIndoor or outdoor
OriginHandcrafted in East Idaho, USA

Assembly

Time3–4 hours
People needed2–3
ToolsPower drill, rubber mallet, hammer, measuring tape, skill saw or table saw

Coverage

Warranty3-year warranty
Build originMade in the USA

Frequently asked questions

Barrels have less interior air volume per seat than cube cabins of the same capacity. Less volume to heat means faster heat-up (45–90 minutes) and lower running cost across daily use. The curved walls also reflect heat down toward the benches more effectively.

Regular (6'×4') is the right footprint for one or two people. Large (6'×6') is the most popular size for households running group sessions, with room for 4–6. XL (6'×7') maximizes interior depth for the largest groups or for users who want to lie down across the bench.

Both are excellent. Harvia KIP is the classic Finnish heater — proven, widely supported, ubiquitous parts. HUUM Drop is the modern Estonian-designed option with a cleaner aesthetic. Pick by your electrical service (6kW = 30A, 8kW = 40A, 9kW = 50A) and your visual preference.

3–4 hours with 2–3 people. Standard tooling: power drill, rubber mallet, hammer, measuring tape, and a skill saw or table saw.

Yes — the cedar shell is built for indoor or outdoor use.

Handcrafted in East Idaho, USA.

3-year warranty.

Dimensions

Regular (2 Person): H 6' × D 4' × W 6'

Large (4 Person): H 6' × D 6' × W 6'

XL (6 Person): H 6' × D 7' × W 6'

Electrical — Harvia KIP

6kW: 30A dedicated breaker · 10/2 wire · hardwired

8kW: 40A dedicated breaker · 8/2 wire · hardwired

Electrical — HUUM Drop

6kW: 30A dedicated breaker · 10/3 wire · hardwired

9kW: 50A dedicated breaker · 6/3 wire · hardwired

Assembly

People needed: 2–3

Assembly time: 3–4 hours

Required tools: Power Drill, Rubber Mallet, Hammer, Measuring Tape, Skill Saw or Table Saw

  • Available in Regular (2 Person), Large (4 Person), and XL (6 Person) sizes
  • Choose from Harvia 6kw KIP or HUUM Drop 6kw heater with WiFi controls
  • Optional cedar bevel or black cedar bevel roof kit
  • 100% natural western red cedar construction
  • Traditional barrel design with optimal heat retention
  • Indoor and outdoor rated
  • Made in the USA — 3-year warranty and 30-day trial