Skip to content

Chattanooga Triton 6E Traction Table - (Electronic)

Original price $14,040.00 - Original price $14,040.00
Original price
$14,040.00
$14,040.00 - $14,040.00
Current price $14,040.00

✓ Authorized Chattanooga Dealer
✓ Lowest Price Guaranteed
✓ FREE & FAST Shipping: In Stock and Ready to Ship
✓ Questions? Call an RFA Team Member: 1-855-864-6442

10% Off Fall Sale with Code: CHATT10

Chattanooga Triton

Chattanooga Triton 6E Traction Table - (Electronic)

The Chattanooga Triton 6E Traction Table - (Electronic) is a fully electric six-section traction table, with each section moved by its own actuator from an ergonomic hand remote. Head, chest, pelvic and leg positions are set from any side of the table, without walking round to a release lever. Heated cushions hold two set points, 95 F and 100.4 F. An LED light system built into the frame runs seven colours with a fade option. The column lifts the top from 19 to 37 in., and four upholstery colours are on offer.

The table is 90.5 x 37 x 31 in., 109.8 in. long with the traction arm fitted, with an 85.4 in. table length and a 27.5 in. cushion. The column lifts a dynamic load of 440 lb, and the frame takes a maximum workload of 605 lb.

Sections
6 actuators
One per section
Heated cushions
95 / 100.4 F
Two set points
Head section
-30 to +40 deg
Headpiece inclination
Table weight
494 lb
Assembled table
Hand remote from any side 440 lb dynamic lifting capacity Seven-colour LED lighting Traction unit sold separately
Chattanooga Triton 6E Traction Table, LED lighting built into the frame

The table

How it works

On the 6E every section is powered, the cushions heat and the frame carries its own light, all worked from one hand remote.

An actuator on every section
All six sections are powered by their own actuator and driven from an ergonomically positioned hand remote, for smooth, friction-free movement across the head, pelvic, chest and leg sections. A clinician setting a patient up alone reaches every section from either side of the table.
6 powered axes
Cushions that heat to two set points
The cushions carry two heat set points, 95 F and 100.4 F, which is roughly skin temperature and a little above it. Heating is built into the table top and switched from the console, so there is no separate heat pad to fetch and launder between patients.
95 / 100.4 F
Pelvic tilt and headpiece
The pelvic section tilts 0 deg to 20 deg to help promote lumbar spine flexion, and the headpiece repositions from -30 deg to +40 deg for improved access to the thoracic and cervical regions. Dropping the headpiece below horizontal opens the head end for cervical positioning.
-30 to +40 deg
An LED band in the frame
Seven colours with a fade option are integrated into the table frame, an atmospheric light system that sets a calm treatment environment and keeps the table lit when the room lighting comes down.
7 colours

Triton 6E

Key features

The 6E is built for clinic flexibility, with a six-section top for prone and supine work and a table that moves easily between rooms.

Comfort prone and supine
The six-section design supports the patient in both prone and supine positions, with heated cushions under either one.
Face hole with a removable cover
The head section carries a face hole with a removable cover for prone work.
A leg section that rises
The 30 in. leg section runs 0 deg to 45 deg with 4 in. of leg displacement.
Easy to move
The 6E moves easily between rooms and stays secure once positioned.

In detail

How to use it

Chattanooga Triton 6E Traction Table, section actuator and hinge
Sections and angles

Every section on the hand remote

Head and back section 28 in., middle section 8.6 in., pelvic section 10 in. and leg section 30 in. Each of the six is driven by its own actuator from the remote, so the clinician sets a position without letting go of the patient. Tuck-away grab bars anchor the patient for hanging traction without a thoracic restraint.

  • Head and back 28 in., middle 8.6 in.
  • Pelvic 10 in., 0 deg to 20 deg, for lumbar spine flexion
  • Leg 30 in., 0 deg to 45 deg, 4 in. displacement
  • Ergonomic hand remote drives all six sections
  • Tuck-away grab bars for hanging traction
6 actuators Grab bars 27.5 in. cushion
Chattanooga Triton 6E Traction Table, the full table in blue upholstery
Fitment

Which head mounts on the 6E arm

The traction head mounts on the arm and does the pulling. The Triton DTS unit comes inside the Basic and Advanced accessory packages, while the Triton Traction Unit and the TX Traction Unit are sold on their own and mount on the same arm. Every head needs its own patient interrupt switch in the patient's grasp before it will run, and the switch follows the head, so a TX switch and a Triton switch are different parts. Belting, bolsters and positioning pillows are ordered separately, and the QuikWrap DTS Belt Set and the Deluxe Universal Belt System are separate products.

Patient switch Basic or Advanced Two belt sets

Triton 6E

Videos

The range

How it compares

The six-section Tritons carry a traction arm at the head end, and the Galaxy tables a scissor base with a sliding lower surface. The 6E is the Triton with every section powered.

Chattanooga Triton 6M, six-section traction table
Triton 6M
Six sections on gas springs with one electric column, and a 363 lb patient weight.
6 sections Height 19 to 37 in. Patient weight 363 lb 428 lb; shipping 484 lb
Shop the Triton 6M
You're Here
Chattanooga Triton 6E electronic traction table
Triton 6E
Six sections on six actuators, heated cushions at 95 F and 100.4 F, LED lighting.
6 sections, each powered by one of 6 actuators Head section -30 deg to +40 deg Pelvic section tilt 0 deg to 20 deg 494 lb; shipping 550 lb
Currently viewing
Chattanooga Galaxy TTET-400 four-section traction table
Galaxy TTET-400
Four sections, adding a 9.8 in. pelvic section and a leg incline of 0 to 73 deg.
4 sections Leg section angle 0 deg to 73 deg Dynamic lifting capacity 440 lb; maximum workload 605 lb 274 lb; shipping 330 lb
Shop the Galaxy TTET-400
Chattanooga Galaxy TTET-300 three-section traction table
Galaxy TTET-300
Three sections, scissor frame, 274 lb table, 103 in. long with the traction platform.
3 sections Leg section 44.7 in., 6 in. displacement Dynamic lifting capacity 440 lb; maximum workload 605 lb 274 lb; shipping 330 lb
Shop the Galaxy TTET-300

Questions

Frequently asked questions

The column lifts up to 440 lb (dynamic lifting capacity), and the frame takes a maximum workload of 605 lb in total with the table, the patient and everything on it.

No. This is the table only. The Triton DTS Traction Unit is sold separately in the Basic (8245) or the Advanced (8250) accessory package, and the Triton Traction Unit and the TX Traction Unit mount on the same head-end arm.

Basic is the Triton DTS traction unit, the QuikWrap DTS belt set and a pair of knee bolsters. Advanced adds the Stabilizer pressure biofeedback unit and the Clinical Cervical Traction System with its clevis. The DTS head in both holds up to 80 user-defined protocols and pulls from 0 to 200 lb in 1 lb steps.

The QuikWrap DTS Belt Set, built for pelvic or lumbar traction applications, rated up to 300 lb. The Deluxe Universal Belt System is a different product, holding a thoracic belt, a pelvic belt and a pelvic belt extender, and it goes on in two minutes.

The table is 90.5 x 37 x 31 in. and 109.8 in. long with the traction arm, with an 85.4 in. table length and a 27.5 in. cushion. The remote reaches every section from either long side.

Crated, at 550 lb. The crate measures 92.5 x 37.4 x 31.5 in., and the table inside weighs 494 lb.

Yes. The 6E is designed for clinic flexibility: easy to move, and secure once positioned.

120 V~, 50/60 Hz, max 2 A at 120 V, Class I, Type B, CE marked under Class I Rule 12. It covers the column, the six actuators, the heating and the LED band together.

Black, Black / Ecru White, Gray and Light Blue. Ecru is an unbleached off-white, nearer beige than white.

  • Total dimensions: 90.5 x 37 x 31 in. (L x W x H); table length 85.4 in.
  • Total length with traction arm: 109.8 in.
  • Cushion width: 27.5 in.
  • Section lengths: 28 in. head and back, 8.6 in. middle, 10 in. pelvic, 30 in. leg
  • Height adjustment: 19 to 37 in.
  • Head section angle: -30 deg to +40 deg
  • Pelvic section angle: 0 deg to 20 deg
  • Leg section: 0 deg to 45 deg, 4 in. displacement
  • Heating set points: 95 F and 100.4 F
  • Capacity: 440 lb dynamic lifting capacity; 605 lb maximum workload
  • Table weight: 494 lb; shipping 550 lb, crate 92.5 x 37.4 x 31.5 in.
  • Mains power: 120 V~, 50/60 Hz, max 2 A at 120 V
  • Electrical safety class: Class I, Type B; CE, Class I Rule 12
  • Sections: 6, each powered by one of 6 actuators
  • Control: Ergonomic hand remote
  • Heated cushions: Two set points, 95 F and 100.4 F
  • LED lighting: Integrated in the frame, 7 colours with fade option
  • Mobility: Easy to move, secure once positioned
  • Head section angle: -30 deg to +40 deg
  • Pelvic section angle: 0 deg to 20 deg, for lumbar spine flexion
  • Leg section: 0 deg to 45 deg, 4 in. displacement
  • Face hole: In the head section, with removable cover
  • Grab bars: Tuck-away, for hanging traction
  • Traction unit: Not included; Triton DTS unit in the Basic (8245) or Advanced (8250) accessory package
  • Heating control: Built into the cushions and switched at the console
  • Upholstery: Black, Black / Ecru White, Gray and Light Blue
  • Hand remote: Ergonomic, drives all six sections
  • Grab bars: Tuck-away, fitted to the table
  • Face hole cover: Removable, in the head section
  • Traction unit: Not included; sold on its own or in the Basic or Advanced accessory package